Serviceline Industrial Sensors
Serviceline Explosion Protection

Slot grid sensor RAL70-IR/32/98

RAL70-IR/32/98
  • Compact slot grid sensor
  • Open frame with wide detection area
  • Optimized for the detection of small parts
  • Option to suppress stationary objects
  • Detection of very small guided and non-guided parts in free fall

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  RAL70-IR/32/98

Product Description
Compact slot grid sensor, optimized for detection of small parts, 70 mm slot width, infrared light, PNP output, M8 plug
General specifications
Light sourceIRED
Light typemodulated infrared light
MarkingCE
Slot width70 mm
Slot depth70 mm
Ambient light limit10000 Lux
Resolution1 mm
Temperature influence< 10 %
active zone70 mm x 64 mm
Indicators/operating means
Function indicatorLED, yellow
Control elementssensitivity adjustment
Control elementsTime adjuster for Pulse stretching and Dynamic/static operation
Electrical specifications
Operating voltage24 V DC ± 20 %
No-load supply current< 70 mA
Output
Switching typedark on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching current200 mA
Voltage drop< 2.5 V
Switching frequency5000 Hz
Repeat accuracy0.1 mm
Pulse extension0.1 ... 150 ms
Conformity
Product standardEN 60947-5-2
Ambient conditions
Ambient temperature-10 ... 60 °C (14 ... 140 °F)
Mechanical specifications
Housing width20 mm
Housing height110 mm
Degree of protectionIP67
ConnectionM8 connector, 3-pin
Material
Housingblack anodized aluminum
Optical faceglass
Mass300 g

Documents: RAL70-IR/32/98

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF295 KB
Product information
Product information - Easy detection of small parts - Slot and slot grid sensorsENGPDF536 KB
Produktinformation - So einfach Kleines erkennen - Gabel- und RahmenlichtschrankenGERPDF539 KB

Approvals+Certificates: RAL70-IR/32/98

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-1830APDF653 KB

Associated Products: RAL70-IR/32/98

Accessories

Female cordset single-ended, M8, 3-pin, PUR cablefa

Function: RAL70-IR/32/98

Slot grid sensors are ideal for filling and counting objects in feed devices. In contrast to standard photoelectric slot sensors, the slot grid sensors have an entire field for object detection with a maximum response time of 100 μs and a minimum object size of 1 mm. When using dynamic mode, only moving objects are detected.