Serviceline Industrial Sensors
Serviceline Explosion Protection

Distance sensor VDM35-30-R/20/105/122

VDM35-30-R/20/105/122
  • Can be aligned using an integrated pilot laser
  • Adjustable switch outputs
  • Not sensitive to ambient light
  • Analog output 4 mA ... 20 mA

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  VDM35-30-R/20/105/122

Product Description
Universal distance sensor, measurement to reflector, 30 m detection range, red laser light, laser class 2, 2 x PNP outputs, analog output, M12 plug
General specifications
Measurement range0.2 ... 30 m
Light sourcelaser diode
Light typemodulated visible red light
modulated infrared light
Laser nominal ratings
Laser classMeasurement laser: 1
Alignment laser: 2
Wave lengthMeasurement laser: 905 nm
Alignment laser: 650 nm
Measuring methodTime of flight measurement
Diameter of the light spot45 mm x 60 mm at a distance of 30 m
Indicators/operating means
Function indicatorLED yellow: switching state (2x) , LED orange : Operating mode
Control elementsControl panel : Adjuster for switch point , Operating mode , Analog output ( S - Set , T - Toggle )
Electrical specifications
Operating voltage18 ... 30 V DC , class 2
Output
Switching typelight/dark on, switchable
Signal output2 PNP, short-circuit protected
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 60947-5-2
Standard conformity
Laser classIEC 60825-1:2007
Approvals and certificates
ApprovalsCE, cULus
Mechanical specifications
Degree of protectionIP67
Connection5-pin, M12 x 1 connector
Material
HousingABS
Optical facePMMA

Documents: VDM35-30-R/20/105/122

Instruction leafletsLanguageFile TypeFile Size
Instruction leaflet / Beipackzettel ALLPDF1041 KB

CAD+CAE: VDM35-30-R/20/105/122

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS5231 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP1524 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: VDM35-30-R/20/105/122

CertificatesCertificate No.File TypeFile Size
EU Pepperl+FuchsPF08CERT1244PDF503 KB
US CA UL General PurposeE87056LINK---

Associated Products: VDM35-30-R/20/105/122

Accessories
Mounting bracket fa
Adjustment set series VDM35fa
Alignment aid for VDM35 and VDM70 seriesfa

Discover the SmartRunner light section sensors equipped with a unique combination of light section technology and a 2-D vision sensor with integrated LEDs …