Distance sensor VDM35-6-L/20/115b/122
- Can be aligned using an integrated pilot laser
- Adjustable switch outputs
- Not sensitive to ambient light
- Analog output 4 mA ... 20 mA
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of VDM35-6-L/20/115b/122
| Product Description |
|---|
| Universal distance sensor, measurement to object, 6 m detection range, red laser light, laser class 2, 2 x PNP outputs, analog output, fixed cable with M12 plug |
| General specifications | ||
|---|---|---|
| Measurement range | 0.2 ... 6 m | |
| Reference target | Kodak white (90%) | |
| Light source | laser diode | |
| Light type | modulated visible red light modulated infrared light |
|
| Laser nominal ratings | ||
| Note | VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM | |
| Laser class | Measuring laser: 1 Alignment laser: 2 |
|
| Wave length | Measuring laser: 905 nm Alignment laser: 650 nm |
|
| Beam divergence | Measuring laser: 2 mrad Alignment laser: 1 mrad | |
| Pulse length | Measuring laser: 6 ns Alignment laser: 0.25 µs | |
| Repetition rate | Measuring laser: 40 kHz Alignment laser: 1 kHz | |
| Maximum optical power output | Measuring laser: 1.8 W Alignment laser: 3 mW | |
| Measuring method | Time of flight measurement | |
| Diameter of the light spot | 4 mm x 12 mm at a distance of 6 m | |
| Ambient light limit | 5000 Lux | |
| Temperature influence | typ. ≤ 1.2 mm/K | |
| Indicators/operating means | ||
| Operation indicator | LED green | |
| Function indicator | LED yellow: switching state (2x) , LED orange : Operating mode | |
| Control elements | Control panel : Adjuster for switch point , Operating mode , Analog output ( S - Set , T - Toggle ) | |
| Parameterization indicator | LED red (4x) | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC , class 2 | |
| Ripple | 10 % within the supply tolerance | |
| No-load supply current | ≤ 125 mA / 24 V DC | |
| Time delay before availability | ≤ 300 ms | |
| Output | ||
| Switching type | light/dark on, switchable | |
| Signal output | 2 PNP, short-circuit protected | |
| Switching current | max. 100 mA | |
| Measurement output | 1 analog output 4 ... 20 mA, short-circuit/overload protected , Rmax = 500 Ohm | |
| Voltage drop | ≤ 2.4 V | |
| Deviation of the characteristic curve | typ. ≤ ± 40 mm | |
| Switching frequency | Fast: 40 Hz / Slow: 16 Hz | |
| Response time | Fast: 13 ms / Slow: 80 ms | |
| Repeat accuracy | Fast: ≤ ± 15 mm / Slow: ≤ ± 10 mm | |
| Compliance with standards and directives | ||
| Directive conformity | ||
| EMC Directive 2004/108/EC | EN 60947-5-2 | |
| Standard conformity | ||
| Laser class | IEC 60825-1:2001 | |
| Approvals and certificates | ||
| Approvals | CE | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -40 ... 80 °C (-40 ... 176 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | fixed cable 200 mm with M12 connector, 5 pin | |
| Material | ||
| Housing | ABS | |
| Optical face | PMMA | |
| Mass | 200 g | |
| Dimensions | ||
| Height | 93 mm | |
| Width | 95 mm | |
| Depth | 42 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: VDM35-6-L/20/115b/122
Product Documentation: VDM35-6-L/20/115b/122
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Instruction leaflet / Beipackzettel | ALL | 946 KB |
Design / Simulation: VDM35-6-L/20/115b/122
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 1524 KB |
Approvals: VDM35-6-L/20/115b/122
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Pepperl+Fuchs | PF08CERT1244 | ALL | 503 KB |
Discover the SmartRunner laser profile sensors equipped with a unique combination of light section technology and a 2-D vision sensor with integrated LEDs …
The R2000 provides reliable and extremely precise measuring results—with a gapless all-around visibility of 360° ...
Measuring in 3-D or at high speed: The R2300 series offers the right LiDAR sensor for every challenge. Learn more about the advantages, the technology, and the application areas ...
For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...
With state-of-the-art technologies, the distance sensors offer the highest levels of precision and reliability ...
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.