Serviceline Industrial Sensors
Serviceline Explosion Protection

Distance sensor VDM100-150-EIP/G2

VDM100-150-EIP/G2
  • Measuring method PRT (Pulse Ranging Technology)
  • Non-contact precision measurement
  • Ultra-fast data acquisition
  • Active dynamic control
  • Modern lightweight design, extremely robust
  • EtherNet/IP

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  VDM100-150-EIP/G2

Product Description
Distance sensor with EtherNet/IP-Interface
General specifications
Measurement range0.3 ... 150 m
Reference targetFoil reflector 500 mm x 500 mm
Light sourcelaser diode
Laser nominal ratings
NoteVISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM
Laser classMeasurement laser: 1
Alignment laser: 2
Wave lengthMeasurement laser: 905 nm
Alignment laser: 660 nm
Beam divergenceMeasurement laser: 2 mrad
Alignment laser: 1 mrad
Pulse lengthMeasurement laser: 4 ns
Repetition rateMeasurement laser: 20 kHz
Maximum optical power outputAlignment laser: 0.6 mW
max. pulse energyMeasurement laser: 12 nJ
Measuring methodPulse Ranging Technology (PRT)
Max. Motion velocity15 m/s
Alignment aidLaser pointer
Life span> 100000 h
Diameter of the light spot< 35 cm at 150 m
Ambient light limit> 100000 Lux
Resolution0.1 mm , adjustable
Temperature influence0.03 mm/K
Functional safety related parameters
MTTFd120 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Diagnostics indicator3 LEDs connection status: Link, speed, activity
Function indicator4 LEDs
Control elementsControl panel (4 membrane keys) for setting parameters status
Parameterization indicatorIlluminated display for displaying measured values and parameterization
Electrical specifications
Operating voltage18 ... 30 V DC
No-load supply current250 mA (18 V) ... 150 mA (30 V)
Protection classIII (operating voltage 50 V)
Time delay before availability< 10 s
Interface
Interface typeEtherNet/IP
Read out rate1000/s @ 100 Mbit/s
Input/Output
Input/output type2 PNP inputs/outputs, independent configuration, short-circuit protected, reverse polarity protected
Input
Switching thresholdlow: Ue < 6 V,
high: Ue > 16 V
Output
Switching thresholdlow: Ua < 1 V,
high: Ua > Ub - 1 V
Switching current200 mA per output
Conformity
Product standardEN 60947-5-2
Laser safetyIEC 60825-1:2007
Measurement accuracy
Measured value output1 ms
Average data age3 ms , 6 ms , 12 ms , 25 ms , 50 ms , adjustable
Offsetmax. 2 mm (between two devices)
Absolute accuracy± 2.5 mm (> 3 m); ± 3.5 mm (0.3 m to 3 m)
Repeat accuracy< 0.5 mm
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
FDA approvalIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature-10 ... 50 °C (14 ... 122 °F)
Storage temperature-20 ... 70 °C (-4 ... 158 °F)
Relative humidity95 % , no moisture condensation
Mechanical specifications
Housing width140 mm
Housing height100 mm
Degree of protectionIP65
Connection4-pin, M12x1 connector, standard (supply) ,
4-pin, M12x1 socket, D-coded (LAN) ,
8-pin, M12x1 connector, service
Material
HousingABS / PC
Optical facePMMA , hard coated
Massapprox. 700 g

Documents: VDM100-150-EIP/G2

ManualsLanguageFile TypeFile Size
Manual VDM100/G2ENGPDF3919 KB
Handbuch VDM100/G2GERPDF5701 KB
Short instructions, safety information
Quick Start Guide VDM100/G2ENGPDF4210 KB
Kurzanleitung VDM100/G2GERPDF747 KB
Product information
A Distance Ahead - Messende optoelektronische SensorenGERPDF3050 KB

CAD+CAE: VDM100-150-EIP/G2

CADFile TypeFile Size
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS4965 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP3614 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: VDM100-150-EIP/G2

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0473CPDF184 KB
Certificates
EU Pepperl+FuchsPF08CERT1244PDF503 KB
US CA UL General PurposeE87056LINK---
Worldwide Declaration of ConformityODVA 11081PDF50 KB

Associated Products: VDM100-150-EIP/G2

Accessories

Female connector, M12, 5-pin, field attachablefa

Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa

Cable connector, M12, 4-pin, D-coded, shielded, non pre-wiredfa

Mounting bracket with deviation mirror for distance measurement devicesfa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Ethernet bus cable, M12 to M12, PUR cable 4-pin, CAT5efa
Mounting bracket for optical data couplerfa

Function: VDM100-150-EIP/G2

Series VDM 100 laser distance measurement devices are designed for high distances. They have a repeat accuracy of 0.5 mm. SSI and fieldbusses are used as value interfaces.

These devices are used for precise positioning of rack operating units, gantry cranes, railbound vehicles, elevators and other linear movable units.

Discover the SmartRunner light section sensors equipped with a unique combination of light section technology and a 2-D vision sensor with integrated LEDs …