Serviceline Industrial Sensors
Serviceline Explosion Protection

Distance sensor OMT550-R201-2EP-IO-V1

OMT550-R201-2EP-IO-V1
  • Medium design with versatile mounting options
  • Space-saving distance sensors in small standardized design
  • Multi Pixel Technology (MPT) - exact and precise signal evaluation
  • IO-link interface for service and process data

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  OMT550-R201-2EP-IO-V1

Product Description
Distance sensor
General specifications
Measurement range100 ... 550 mm
Reference targetstandard white, 100 mm x 100 mm
Light sourceLED
Light typemodulated visible red light
LED risk group labellingexempt group
Angle deviationmax. +/- 1.5 °
Diameter of the light spotapprox. 20 mm at a distance of 550 mm
Angle of divergence2.5 °
Ambient light limitEN 60947-5-2 : 45000 Lux
Resolution0.1 mm
Functional safety related parameters
MTTFd600 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicatorLED yellow:
constantly on - switch output active
constantly off - switch output inactive
Control elementsTeach-In key
Control elements5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply current< 25 mA at 24 V supply voltage
Protection classIII
Interface
Interface typeIO-Link ( via C/Q = pin 4 )
Device profileIdentification and diagnosis
Smart Sensor type 0/type 3.3
Transfer rateCOM 2 (38.4 kBaud)
IO-Link Revision1.1
Min. cycle time3 ms
Process data witdhProcess data input 4 byte
Process data output 2 bits
SIO mode supportyes
Device ID0x111911 (1120529)
Compatible master port typeA
Output
Switching typeThe default setting is:
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Usage categoryDC-12 and DC-13
Voltage drop≤ 1.5 V DC
Response time2 ms , see table 1
Conformity
Communication interfaceIEC 61131-9
Product standardEN 60947-5-2
Measurement accuracy
Temperature drift0.05 %/K
Warm up time5 min
Repeat accuracy≤ 1 % , see table 1
Linearity error0.75 %
Approvals and certificates
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature10 ... 60 °C (50 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width15 mm
Housing height61.7 mm
Housing depth41.7 mm
Degree of protectionIP67 / IP69 / IP69K
Connection4-pin, M12 x 1 connector, 90° rotatable
Material
HousingPC (Polycarbonate)
Optical facePMMA
Massapprox. 37 g

Approvals+Certificates: OMT550-R201-2EP-IO-V1

Statements of complianceCertificate No.File TypeFile Size
Declaration of Conformity for simple apparatus / Konformitätserklärung für einfache BetriebsmittelDOC-3935PDF162 KB
Certificates
Canada USA UL Ordinary Location20170306-E87056PDF407 KB

Software: OMT550-R201-2EP-IO-V1

Device type managersRelease InfoFile TypeFile Size
IODD for OMT-R201 series / IODD für OMT-R201 SerieV1.00.002 / 2019-03-30ZIP807 KB

Associated Products: OMT550-R201-2EP-IO-V1

Accessories

Female cordset, M12, 4-pin, PUR cablefa

Female cordset, M12, 4-pin, PUR cablefa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa

Discover the SmartRunner light section sensors equipped with a unique combination of light section technology and a 2-D vision sensor with integrated LEDs …