Switch Amplifier HiC2853R2
- 1-channel isolated barrier
- 24 V DC supply (bus powered)
- Input for approved dry contacts or SN/S1N sensors
- Application-specific outputs
- Active voltage output
- Passive transistor output (resistive)
- Line fault transparency (LFT)
- Up to SIL 3 acc. to IEC 61508
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of HiC2853R2
| General specifications | ||
|---|---|---|
| Signal type | Digital Input | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 3 | |
| Supply | ||
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) | |
| Rated voltage | 19 ... 30 V DC bus powered via Termination Board | |
| Ripple | ≤ 10 % | |
| Rated current | ≤ 55 mA | |
| Power dissipation | ≤ 800 mW | |
| Power consumption | ≤ 1300 mW | |
| Input | ||
| Connection side | field side | |
| Connection | SL2: 5a(+), 5b(-) | |
| Open circuit voltage/short-circuit current | approx. 8.4 V DC / approx. 11.7 mA | |
| Lead resistance | max. 50 Ω , consider capacitances and inductances | |
| Switching point | 1-signal: I > 2.8 mA 0-signal: I < 2.1 mA |
|
| Response delay | ≤ 1 ms | |
| Output | ||
| Connection side | control side | |
| Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) | |
| Rated voltage | output I: 19 ... 30 V DC | |
| Output I | passive transistor output (resistive) 0-signal: 15 kΩ ± 5 % 1-signal: 5 kΩ ± 5 % fault: > 100 kΩ |
|
| Output II | active voltage output, short-circuit proof 0-signal: 0 V 1-signal: 20 ... 31 V DC at max. 15 mA fault: 0 V |
|
| Fault indication output | ||
| Connection | SL1: 6b | |
| Output type | open collector transistor (internal fault bus) | |
| Transfer characteristics | ||
| Switching frequency | ||
| Output I | ≤ 50 Hz | |
| Output II | ≤ 50 Hz | |
| Galvanic isolation | ||
| Output/power supply | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff | |
| Output/Output | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff | |
| Indicators/settings | ||
| Display elements | LEDs | |
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
|
| Degree of protection | IEC 60529:2001 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 180 g | |
| Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) | |
| Mounting | on Termination Board | |
| Coding | pin 1 and 2 trimmed For further information see system description. |
|
| Data for application in connection with hazardous areas | ||
| EU-Type Examination Certificate | BASEEFA 07 ATEX 0302X | |
| Marking |  II (1)G [Ex ia] IIC , II (1) D [Ex ia] IIIC , I (M1) [Ex ia] I |
|
| Input | Ex ia | |
| Voltage | 10.5 V | |
| Current | 17.1 mA | |
| Power | 45 mW (linear characteristic) | |
| Supply | ||
| Maximum safe voltage | 253 V AC (Attention! Um is no rated voltage.) | |
| Output | ||
| Maximum safe voltage | 253 V AC (Attention! Um is no rated voltage.) | |
| Certificate | PF 09 CERT 1440 X | |
| Marking | II 3G Ex nA IIC T4 Gc |
|
| Galvanic isolation | ||
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| UL approval | ||
| Control drawing | 116-0364 | |
| IECEx approval | IECEx BAS 07.0097X | |
| Approved for | [Ex ia Ga] IIC, [Ex ia] I , [Ex ia] IIIC | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Documents: HiC2853R2
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Functional Safety Manual | ENG | 357 KB | |
| Manual H-System Isolated Barriers and Termination Boards | ENG | 5551 KB | |
| Handbuch Trennbarrieren und Termination Boards H-System | GER | 5543 KB | |
| Instruction manuals | |||
| Инструкции | BUL | 63 KB | |
| Návod k poużití | CZE | 59 KB | |
| Instruktions manual | DAN | 57 KB | |
| Instruction manual | ENG | 49 KB | |
| Kasutusjuhend | EST | 54 KB | |
| Käyttöohje | FIN | 55 KB | |
| Manuel d'instructions | FRA | 69 KB | |
| Betriebsanleitung | GER | 51 KB | |
| Οδηγίες χρήσης | GRE | 67 KB | |
| Handleiding | HOL | 68 KB | |
| Instruction manual / Betriebsanleitung | HRV | 67 KB | |
| Használati útmutató | HUN | 68 KB | |
| Manuale di istruzioni | ITA | 67 KB | |
| Lietošanas pamācība | LAV | 67 KB | |
| Instrukciju vadovas | LIT | 66 KB | |
| Instrukcja obsługi | POL | 70 KB | |
| Manual de instruções | POR | 69 KB | |
| Manual de utilizare | RON | 68 KB | |
| Návod na poużitie | SLK | 128 KB | |
| Manual de instrucciones | SPA | 68 KB | |
| Manual | SWE | 65 KB | |
CAD+CAE: HiC2853R2
| CAD | File Type | File Size | |
|---|---|---|---|
| Dimension drawing 2-D (DXF) / Abmessungszeichnung 2-D (DXF) | ZIP | 16364 KB |
Approvals+Certificates: HiC2853R2
| Statements of compliance | Certificate No. | File Type | File Size |
|---|---|---|---|
| EU-Declaration of conformity / EU-Konformitätserklärung | DOC-0034C | 148 KB | |
| Certificates | |||
| Baseefa IECEx Certificate of Conformity | IECEx BAS 07.0097X | LINK | --- |
| Canada UL cUL | E106378 cUL (QUZW8) | LINK | --- |
| DNV GL Marine | TAA00002ED | 72 KB | |
| EAC EAC TP TC 020/2011 | TC RU C-DE.MH04.B.00397 | 680 KB | |
| Europe Baseefa ATEX Category (M1) ATEX Category (1) GD | Baseefa 07 ATEX 0302X | 1615 KB | |
| Europe Pepperl+Fuchs ATEX Category 3 G Certificate | PF 09 CERT 1440 X | 208 KB | |
| Russia Belarus Kazakhstan EAC EAC TP TC 012/2011 | EAEC RU C-DE.EX01.B.00102/19 | 9815 KB | |
| USA Canada UL Hazardous Location Certificate of Compliance cULus UL E106378 | CoC 20130429 - E106378 RepRef 20130429 | 425 KB | |
| USA UL | E106378 UL (QUZW2) | LINK | --- |
| exida Functional Safety Assessment | P+F 08/03-32R1C V2R1 | 456 KB | |
| Control drawings | |||
| Control Drawing UL / Control Drawing UL | 154 KB | ||
Function: HiC2853R2
This isolated barrier is used for intrinsic safety applications.
The device transfers digital signals (SN/S1N proximity sensors or approved dry contacts) from a hazardous area to a safe area.
The input controls one 24 V DC active voltage output and one passive transistor output with a resistive output characteristic.
The passive transistor output has three defined states: 1-Signal = 5 kΩ, 0-Signal = 15 kΩ and fault > 100 kΩ.
Lead breakage (LB) and short circuit (SC) conditions of the control circuit are continuously monitored.
Unlike a SN/S1N series safety sensor, an approved dry contact requires a 10 kΩ resistor to be placed across the contact in addition to a 1.5 kΩ resistor in series.
This device mounts on a HiC termination board.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.