Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
|Rated voltage||20 ... 30 V DC|
|Fusing||3.15 A , 5 x 20 mm (0.2 x 0.8 inch)|
|Power dissipation||0.7 W , with Multiplexer|
|Reverse polarity protection||yes|
|HART signal channels (intrinsically safe)|
|HART signal channels|
|Number of channels||32 unbalanced signal loops|
|HART signal channels||30 V DC|
|Ambient temperature||0 ... 55 °C (32 ... 131 °F)|
|Relative humidity||5 ... 90 %, non-condensing|
|Core cross-section||2.5 mm2 (16 AWG)|
|Connection||field side: screw terminals
control side: 56-pin Elco connector
RS 485 interface: removable screw terminals
power: removable screw terminals
|Mass||approx. 500 g|
|Dimensions||without HiDMux2700: 256 x 125 x 79 mm (10 x 4.9 x 3.1 inch)
with HiDMux2700: 256 x 125 x 208 mm (10 x 4.9 x 8.2 inch)
|Mounting||DIN rail mounting|
|Manuals||Language||File Type||File Size|
|Manual DTM description HiDMux2700||ENG||2278 KB|
|Manual HiDMux2700||ENG||8581 KB|
|Handbuch DTM-Beschreibung HiDMux2700||GER||2323 KB|
|Handbuch HiDMux2700||GER||8545 KB|
|Certificates||Certificate No.||File Type||File Size|
|exida Functional Safety Assessment||P+F 08/02-12 R004||345 KB|
The Termination Board is designed for easy HiDMux2700 Multiplexer integration with the Tricon safety system.
With the Multiplexer integrated into the board and plug-n-play option for the DCS equipment, this provides a very clean access to the HART signals, while reducing the need for marshalling cabinets and reducing equipment that require extra cabinet space.
The HART Termination Board provides a robust solution for on-line HART communications, interfaces up to 32 field located HART devices, and, it allows the user to replace standard DCS field termination panels.