Serviceline Industrial Sensors
Serviceline Explosion Protection

Coupling 9408 10*10

9408 10*10
  • Average torsional rigidity
  • Small reset forces
  • Shock- and vibration-absorbing
  • Thermally and electrically insulating
  • Very good compensation of radial, lateral and angular misalignments
  • Maintenance-free

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  9408 10*10

Product Description
Double loop coupling 10 x 10
Ambient conditions
Operating temperature-30 ... 80 °C (-22 ... 176 °F)
Mechanical specifications
Shaft diameter10 mm
Material
FastenerPolyurethane
End pieceZinc plated steel
Mass85 g
Rotational speedmax. 3000 min
Max. torque2 Nm
Radial offsetmax. ± 3 mm
Axial offsetmax. ± 4 mm
Angle errormax. ± 12 °
Torsion spring stiffness28 Nm / rad
Radial spring stiffness7 N / mm
Moment of inertia106 kg m2 x 10-7
Mountingclamp screws M4 x 6, DIN 916
Tightening torque of clamping screwsmax. 1 Nm

Classifications

SystemClasscode
ECLASS 13.027270592
ECLASS 12.027270592
ECLASS 11.027270592
ECLASS 10.0.127270592
ECLASS 9.027270592
ECLASS 8.027279103
ECLASS 5.127270591
ETIM 9.0EC003015
ETIM 8.0EC003015
ETIM 7.0EC003015
ETIM 6.0EC003015
ETIM 5.0EC003015
UNSPSC 12.123153016

Details: 9408 10*10

Design / Simulation: 9408 10*10

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP306 KB
CAD Portal / CAD PortalALLLINK---

Associated Products: 9408 10*10

Accessory of
Housing ∅ 58 mm, Solid shaft, Servo or clamping flange, Up to 5000 ppr, Universal output driver, Enclosure type: 58 mm, Type of shaft: Solid shaft, Interface: push-pull, incremental, Detection type: photoelectric sampling, Output type: push-pull or RS422 (universal output driver, output level depending on input voltage)fa