Simulator IS01
- 1-channel
- Loop powered
- NAMUR sensor simulator and pulse generator
- Simulates line faults
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of IS01
| Supply | ||
|---|---|---|
| Connection | loop powered | |
| Indicators/settings | ||
| Control elements | slide switches | |
| Configuration | via slide switches | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21 | |
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 70 g | |
| Dimensions | 40 x 130 x 25 mm (1.6 x 5.1 x 1 inch) | |
| Height | 130 mm | |
| Width | 40 mm | |
| Length | 25 mm | |
| Construction type | gray ABS handheld housing | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | DMT 02 ATEX E 008 | |
| Marking |  II 1G EEx ia IIB T4 |
|
| Voltage | 16 V DC | |
| Current | 55 mA | |
| Power | 245 mW | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 19200504 |
| ECLASS 12.0 | 19200504 |
| ECLASS 11.0 | 19200504 |
| ECLASS 10.0.1 | 19200504 |
| ECLASS 9.0 | 19200504 |
| ECLASS 8.0 | 27279211 |
| ECLASS 5.1 | 27279211 |
| ETIM 9.0 | EC000305 |
| ETIM 8.0 | EC000305 |
| ETIM 7.0 | EC000305 |
| ETIM 6.0 | EC000305 |
| ETIM 5.0 | EC003015 |
| UNSPSC 12.1 | 41113642 |
Details: IS01
Function
This simulator imitates a NAMUR proximity sensor by implementing a three-position switch. A three-position switch facilitates the selection of various test conditions.
The first position (NAMUR voltage) simulates a 1 kΩ resistive load, while the second position (sensor static) offers various sensor-damping conditions, including a short circuit simulation. The third switch position (sensor dynamic) offers the user several frequency settings between 0.1 Hz ... 1 kHz using a rectangular wave with a 50 % duty cycle.
Product Documentation: IS01
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Instruction manual | ENG | 121 KB |
Approvals: IS01
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| Europe DMT ATEX Category (1) G | DMT 02 ATEX E 008 | ALL | 118 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) | TDOC-3358AENG | ENG | 183 KB | |
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.