Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
OPC120P-F201-B17
| Product Description |
| Optical Print Inspector, reading of Data Matrix codes, PROFINET, speeds up to 10 m/sec, polarization filter |
| General specifications |
| Polarization filter | yes |
| Symbologies | Data Matrix |
| Read distance | 70 ... 180 mm
Nominal distance: 120 mm |
| Reading field | Minimum read field: 28 mm x 45 mm
Read field at nominal distance: 45 mm x 70 mm
Maximum read field: 65 mm x 105 mm |
| Modul size | Minimum module size: 0.2 mm |
| Functional safety related parameters |
| MTTFd | 40.5 a |
| Mission Time (TM) | 8 a |
| Diagnostic Coverage (DC) | 0 % |
| Electrical specifications |
| Operating voltage | 24 V DC ± 15% , PELV |
| No-load supply current | max. 300 mA |
| Power consumption | 6 W |
| Interface |
| Interface type | 100 BASE-TX |
| Protocol | PROFINET IO Real-Time (RT) Conformance class A |
| Transfer rate | 100 MBit/s |
| Interface 2 |
| Interface type | USB Service |
| Input |
| Switching threshold | low: < 10 V, high: > 15 V |
| Cable length | max. 30 m |
| Output |
| Switching type | PNP |
| Cable length | max. 30 m |
| Compliance with standards and directives |
| Standard conformity | |
| Noise immunity | EN 61326-1:2006 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 |
| Degree of protection | EN 60529 |
| Laser class | IEC 60825-1:2007 |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Approvals | CE |
| Ambient conditions |
| Ambient temperature | 0 ... 45 °C (32 ... 113 °F) |
| Storage temperature | -20 ... 85 °C (-4 ... 185 °F) |
| Mechanical specifications |
| Degree of protection | IP65 |
| Connection | 8-pin, M12x1 connector, standard (supply+IO) ,
4-pin, M12x1 socket, D-coded (LAN) ,
4-pin, M12x1 socket, D-coded (LAN) |
| Material | |
| Housing | PC/ABS |
| Installation | 4 x M6 threading |
| Mass | approx. 200 g |
Documents:
OPC120P-F201-B17
CAD+CAE:
OPC120P-F201-B17
Approvals+Certificates:
OPC120P-F201-B17
Software:
OPC120P-F201-B17
Associated Products:
OPC120P-F201-B17
| Accessories |
|
|
|
| Female connector, M12, 8-pin, shielded, field attachablefa |
|
|
|
|
| Female cordset, M12, 8-pin, shielded, PUR cablefa |
|
|
|
|
| Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa |
|
|
|
|
|
| Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa |
|
|
|
|
| Y connection cablefa |
|
Function:
OPC120P-F201-B17
With the Optical Print Inspector, Pepperl+Fuchs provides the solution to code reading and detection tasks in the field of printing, paper, and packaging.
Whether reading 1-D and 2-D codes at high speeds, reading reliably on reflective surfaces and at varying intervals, or performing various detection tasks — with the Optical Print Inspector, you always have the right Vision Sensor close at hand.
+49 621 776-0