Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
OPC70P-F201-R2-45
Product Description |
Optical Print Inspector, reads all common 1-D and 2-D codes, detects logos, Ethernet, RS 232, speeds of up to 10 m/s; polarization filter |
General specifications |
Polarization filter | yes |
Symbologies | Data Matrix, Code 39, Code 128, Int 2 of 5, EAN13, Pharmacode |
Read distance | 45 ... 90 mm Nominal distance: 70 mm |
Reading field | Minimum read field: 22 mm x 30 mm Read field at nominal distance: 28 mm x 45 mm Maximum read field: 35 mm x 55 mm |
Modul size | Minimum module size: 0.15 mm |
Functional safety related parameters |
MTTFd | 40.5 a |
Mission Time (TM) | 8 a |
Diagnostic Coverage (DC) | 0 % |
Electrical specifications |
Operating voltage | 24 V DC ± 15% , PELV |
No-load supply current | max. 250 mA |
Power consumption | 6 W |
Interface |
Interface type | serial , RS 232 |
Transfer rate | max. 115.2 kBit/s |
Cable length | max. 30 m |
Interface 1 |
Interface type | Ethernet |
Protocol | TCP/IP |
Transfer rate | 100 MBit/s |
Input |
Switching threshold | low: < 10 V, high: > 15 V |
Cable length | max. 30 m |
Output |
Switching type | PNP |
Cable length | max. 30 m |
Compliance with standards and directives |
Standard conformity | |
| Noise immunity | EN 61326-1:2006 |
| Emitted interference | EN 61000-6-4:2007/A1:2011 |
| Degree of protection | EN 60529 |
| Laser class | IEC 60825-1:2007 |
Approvals and certificates |
UL approval | cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Approvals | CE |
Ambient conditions |
Ambient temperature | 0 ... 45 °C (32 ... 113 °F) |
Storage temperature | -20 ... 60 °C (-4 ... 140 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 8-pin, M12x1 connector, standard (supply+IO) , 5-pin, M12x1 socket, standard (RS 232) , 4-pin, M12x1 socket, standard (LAN) |
Material | |
| Housing | PC/ABS |
Installation | 4 x M6 threading |
Mass | approx. 160 g |
Documents:
OPC70P-F201-R2-45
CAD+CAE:
OPC70P-F201-R2-45
Approvals+Certificates:
OPC70P-F201-R2-45
Software:
OPC70P-F201-R2-45
Associated Products:
OPC70P-F201-R2-45
Accessories |
|
|
|
Female connector, M12, 8-pin, shielded, field attachablefa |
|
|
|
|
Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable grey, shieldedfa |
|
|
|
|
Male cordset single-ended M12 straight A-coded, 5-pin, PUR cable grey, shieldedfa |
|
|
|
|
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa |
|
|
|
|
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa |
|
|
|
|
Y connection cablefa |
|
Function:
OPC70P-F201-R2-45
With the Optical Print Inspector, Pepperl+Fuchs provides the solution to code reading and detection tasks in the field of printing, paper, and packaging.
Whether reading 1-D and 2-D codes at high speeds, reading reliably on reflective surfaces and at varying intervals, with overly long barcodes or performing diverse detection tasks with the Optical Print Inspector, you always have the right Vision Sensor at your disposal.