Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
VB14N-600
| Product Description |
| Barcode scanner |
| General specifications |
| Light source | laser diode |
| Light type | modulated visible red light |
| Laser nominal ratings | |
| Note | LASER LIGHT , DO NOT STARE INTO BEAM |
| Laser class | 2 |
| Wave length | 650 nm |
| Beam divergence | < 1.5 mrad |
| Pulse length | 1.5 ms |
| Repetition rate | 200 Hz |
| max. pulse energy | 3.26 µJ |
| Scan rate | 600 ... 1000 s-1 |
| Read distance | 190 ... 600 mm |
| Angle of divergence | 50 ° |
| Optical face | front or on side (with deviation mirror) |
| Resolution | 0.35 mm ( 14 mils ) |
| Indicators/operating means |
| Operation indicator | LED blue: Power on, LED green: Ready to read (READY), LED green: Read successfully (GOOD), LED yellow: External trigger signal pending (TRIGGER), LED yellow: Communication active (COM), LED red: "no read" (STATUS) |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Power consumption | max. 5 W |
| Interface |
| Interface type | serial , RS-232 and RS-485 up to 115.2 kBit/s
ID-NET™ up to 1 Mbit/s |
| Input 1 |
| Input type | External triggering |
| Output |
| Signal output | 2, programmable, optocoupled |
| Switching voltage | max. 40 V DC |
| Switching current | max. 40 mA |
| Voltage drop | 1 V at load current ≤ 10 mA |
| Compliance with standards and directives |
| Directive conformity | EMC Directive 2004/108/EC |
| Standard conformity | |
| Noise immunity | EN 61000-6-2:2005 |
| Emitted interference | EN 55022 |
| Degree of protection | EN 60529 |
| Laser class | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Ambient conditions |
| Ambient temperature | 0 ... 45 °C (32 ... 113 °F) |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
| Relative humidity | 90 % , noncondensing |
| Shock resistance | IEC 68-2-27 Test EA 30G; 11 ms; 3 impacts on each axis |
| Vibration resistance | IEC 68-2-6 Test FC 1.5 mm ; 10 ... 55 Hz ; 2 hours on each axis |
| Mechanical specifications |
| Degree of protection | IP65 |
| Connection | 1 m cable with 25-pin Sub-D connector |
| Material | |
| Housing | Aluminum |
| Mass | 330 g |
Classifications
| System | Classcode |
| ECLASS 11.0 | 27280102 |
| ECLASS 10.0.1 | 27280102 |
| ECLASS 9.0 | 27280102 |
| ECLASS 8.0 | 27280102 |
| ECLASS 5.1 | 27280102 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| UNSPSC 12.1 | 43211701 |
Approvals+Certificates:
VB14N-600
Associated Products:
VB14N-600
| Accessories |
|
|
|
| Connector box for barcode scanner, Connect up to 32 scanners to a network with ID-NetTM, Option of upgrading with memory module, Easy scanner connection by means of clamp terminals, Degree of protection IP65fa |
|
|
|
|
| PROFIBUS Connector box for barcode scanner, Connect up to 32 scanners to a network with ID-NetTM, PROFIBUS interface, Easy scanner connection by means of clamp terminalsfa |
|
|
|
|
| oscillating mirror for the VB14N barcode scanner seriesfa |
|
|
|
|
| Deviation mirror for barcode scanner series VB14fa |
|
|
|
|
| Deviation mirror for barcode scanner series VB14fa |
|
|
|
|
| PROFINET Connector box for barcode scanner, Connect up to 32 scanners to a network with ID-NetTM, Easy scanner connection by means of clamp terminalsfa |
|
|
|
|
| EtherNet/IP Connector box for barcode scanner, Connect up to 32 scanners to a network with ID-NetTM, Easy scanner connection by means of clamp terminals, Degree of protection IP65fa |
|
Function:
VB14N-600
The VB14N-600 is a line scanner for 1D barcodes. With its high-performance optics and code reconstruction, the scanner offers a high level of reliability in reading difficult-todetect 1D barcodes.
A function key and several LEDs on the barcode scanner provide support when parameterizing, teaching in barcodes, and testing. In live operation, the LEDs provide information about the relevant read status
You can establish a high-speed connection between up to 32 devices. This connection enables data to be recorded in a quicker and more efficient manner, without the need for an additional external multiplexer.
The corresponding PC software makes parameterization simple.
+49 621 776-0