Safety light grid with integrated control unit SLPC10-3
- Sensing range up to 10 m
- 3-radial design
- Beam spacing 400 mm
- Self-monitoring (type 4 according to IEC/EN 61496-1)
- Red transmission light
- Usable with or without start/restart disable
- Integrated relay monitor
- 7-segment diagnostic display
- Integrated function display
- Operating reserve indication
- OSSD outputs as semiconductor or relay outputs
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of SLPC10-3
| System components | ||
|---|---|---|
| Emitter | SLP10-3-T | |
| Receiver | SLPC10-3-R | |
| General specifications | ||
| Effective detection range | 0.2 ... 10 m | |
| Light source | LED | |
| Light type | modulated visible red light | |
| Tests | IEC/EN 61496 | |
| Safety type according to IEC/EN 61496 | 4 | |
| Marking | CE | |
| Target size | static: 32 mm dynamic: 50 mm (at v = 1.6 m/s of the obstacle) |
|
| Beam spacing | 400 mm | |
| Number of beams | 3 | |
| Operating mode | Start/restart disable, relay monitor, | |
| Opening angle | < 5 ° | |
| Functional safety related parameters | ||
| Performance level (PL) | PL e | |
| Category | Cat. 4 | |
| Mission Time (TM) | 20 a | |
| PFHd | 3.54 E-9 | |
| Type | 4 | |
| Indicators/operating means | ||
| Diagnostics indicator | 7-segment display | |
| Function indicator | LED red: per receiver channel off: interruption flashes: receiver continuously on: reception with sufficient stability control on the front plate: LED red: OSSD off LED green: OSSD on |
|
| Stability alarm indicator | LED red next to receiver flashes | |
| Control elements | 10 DIP switch in receiver terminal compartment | |
| Electrical specifications | ||
| Operating voltage | 24 V DC -15% / +25% , galvanically isolated | |
| No-load supply current | max. 250 mA | |
| Protection class | III , IEC 61140 | |
| Input | ||
| Activation current | approx. 10 mA | |
| Activation time | 0.03 ... 1 s | |
| Test input | Reset-input for system test | |
| Function input | Relay monitor, start release | |
| Output | ||
| Stability alarm output | 1 PNP, +UB -2 V, max. 300 mA | |
| Safety output | 2 separated fail safe semiconductor outputs | |
| Signal output | 1 PNP each, max. 300 mA for start readiness, OSSD on, OSSD off | |
| Switching voltage | Operating voltage -2 V | |
| Switching current | max. 0.5 A | |
| Response time | 20 ms | |
| Conformity | ||
| Functional safety | ISO 13849-1 |
|
| Product standard | EN 61496-1 ; IEC 61496-2 | |
| Approvals and certificates | ||
| CE conformity | CE | |
| Approvals | TÜV SÜD | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Relative humidity | max. 95 %, not condensing | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | M16 cable gland , terminal compartment with cage-terminals, M12-connector for emitter |
|
| Connection options | Further electrical connection options on request: Connector DIN 43 651 Hirschmann, emitter: 6-pin+PE, receiver: 11-pin+PE |
|
| Material | ||
| Housing | extruded aluminum profile, RAL 1021 (yellow) coated | |
| Optical face | Plastic pane | |
| Mass | Per 3400 g | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272703 |
| ECLASS 12.0 | 27272703 |
| ECLASS 11.0 | 27272703 |
| ECLASS 10.0.1 | 27272703 |
| ECLASS 9.0 | 27272703 |
| ECLASS 8.0 | 27272703 |
| ECLASS 5.1 | 27272703 |
| ETIM 9.0 | EC002549 |
| ETIM 8.0 | EC002549 |
| ETIM 7.0 | EC002549 |
| ETIM 6.0 | EC002549 |
| ETIM 5.0 | EC002549 |
| UNSPSC 12.1 | 46171620 |
Details: SLPC10-3
Product Documentation: SLPC10-3
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Instruction Manual Safety light grid SLP/SLPC SLP/SLPCM | ENG | 1421 KB |
Design / Simulation: SLPC10-3
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 134 KB |
| CAD 3-D additional / CAD 3-D additional | ALL | STP | 164 KB |
| CAD Portal / CAD Portal | ALL | LINK | --- |
Approvals: SLPC10-3
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| /cert/cert1511b.pdf | U8V 020068 0085 | ALL | 205 KB |
Software: SLPC10-3
| Software Tools | Release Info | File Type | File Size |
|---|---|---|---|
| SISTEMA Library Sensors / SISTEMA-Bibliothek Sensoren | ZIP | 131 KB |
Several hundred products with a SIL/PL assessment, free tools, and brochures in one place: the "Functional Safety Hub" is your starting point when you have to implement safety functions.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.