Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Safety control unit SB4-OR-4XP

SB4-OR-4XP
  • Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4
  • 4 sensor channels
  • Self-monitoring (type 4 according to IEC/EN 61496-1)
  • Operating mode can be selected by means of DIP switches
  • Start/Restart disable
  • Relay monitor
  • Pre-fault indication
  • Clearly visible LED functional display
  • 7-segment diagnostic display
  • Safety outputs OSSD, external status displays OSSD

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  SB4-OR-4XP

Product Description
Safety control unit
General specifications
Operating modeStart/restart disable, relay monitor,
Functional safety related parameters
Safety Integrity Level (SIL)SIL 3
Performance level (PL)PL e
CategoryCat. 4
Mission Time (TM)20 a
PFHd3.5 E-9
B10dsee instruction manuals
Indicators/operating means
Diagnostics indicator7-segment display
Function indicatorLED red: OSSD OFF
LED green: OSSD ON
Yellow LED: start readiness channel 1 - 4
LED yellow: switching state (receiver)
Pre-fault indicatorLED yellow flashing: Indicator lamp channel 1 ... 4
Electrical specifications
Operating voltage24 V DC, ± 20 %
Output
Safety output2 relay outputs, force-guided NO-contact
Signal outputOutput for displaying the switching state of the OSSDs
Switching voltage10 V ... 250 V AC/DC
Switching currentmin. 10 mA , max. 6 A AC/DC
Conformity
Functional safetyISO 13849-1 ; EN 61508 part1-4
Product standardEN 61496-1
Mechanical specifications
Degree of protectionIP20
Connectionscrew terminals , lead cross section 0.2 ... 2 mm2

Documents: SB4-OR-4XP

Instruction manualsLanguageFile TypeFile Size
Instruction Manual Modular control system SB4 SafeBoxENGPDF2418 KB
Betriebsanleitung SB4 SafeBoxGERPDF1988 KB

Approvals+Certificates: SB4-OR-4XP

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2139APDF166 KB
Certificates
/cert/cert1246c.pdfZ10 17 12 20068 075PDF498 KB
USA ULE215245LINK---

Software: SB4-OR-4XP

Software ToolsRelease InfoFile TypeFile Size
Software tools / Software ToolsZIP131 KB

Associated Products: SB4-OR-4XP

Matching system components
Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Clearly visible LED functional display and pre-fault indicator on the receiver, Sturdy housing, Operation on control units of SB4 (SafeBox), Construction type(S2): Rectangular type, Connection: 10 m, 0.25 mm2 fixed cablefa
Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Clearly visible LED functional display and pre-fault indicator on the receiver, Sturdy housing, Operation on control units of SB4 (SafeBox), Construction type(S2): Rectangular type, Connection: 5 m, 0.25 mm2 fixed cablefa
Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Clearly visible LED functional display and pre-fault indicator on the receiver, Sturdy housing, Operation on control units of SB4 (SafeBox), Construction type(S2): Rectangular type, Connection: M12 connector, 4-pinfa
Sensing range up to 4 m, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Clearly visible LED functional display and pre-fault indicator on the receiver, Metal housing, Construction type(S2): Rectangular type, Connection: 10 m, 0.25 mm2 fixed cablefa
Sensing range up to 4 m, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Clearly visible LED functional display and pre-fault indicator on the receiver, Metal housing, Construction type(S2): Rectangular type, Connection: 5 m, 0.25 mm2 fixed cablefa
Sensing range up to 4 m, Self-monitoring (type 4 according to IEC/EN 61496-1), Red transmission light, Clearly visible LED functional display and pre-fault indicator on the receiver, Metal housing, Construction type(S2): Rectangular type, Connection: M12 connector, 4-pinfa
Sensing range 8 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 2-radial design, Beam spacing 500 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range 8 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 2-radial design, Beam spacing 500 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range 8 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 2-radial design, Beam spacing 500 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Deflecting mirror for single-beam deflection of the protection beam of safety light beamsfa
Sensing range up to 10 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 2-radial design, Beam spacing 500 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 10 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 2-radial design, Beam spacing 500 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 10 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 3-radial design, Beam spacing 400 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 10 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 3-radial design, Beam spacing 400 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 10 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 4-radial design, Beam spacing 300 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 10 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 4-radial design, Beam spacing 300 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 30 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 2-radial design, Beam spacing 500 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 30 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 3-radial design, Beam spacing 400 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 30 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 4-radial design, Beam spacing 300 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 65 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 2-radial design, Beam spacing 500 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 65 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 3-radial design, Beam spacing 400 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Sensing range up to 65 m, Self-monitoring (type 4 according to IEC/EN 61496-1), 4-radial design, Beam spacing 300 mm, Red transmission light, Connection: M16 cable gland ,
terminal compartmentfa
Resolution 14 mm (finger protection), Protection field height up to 1200 mm, Self-testing (type 2 as per IEC/EN 61496-1), SIL1 acc. to IEC 61508, Degree of protection IP67, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 1200 mmfa
Resolution 30 mm (hand protection), Protection field height up to 2400 mm, Self-testing (type 2 as per IEC/EN 61496-1), SIL1 acc. to IEC 61508, Degree of protection IP67, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 30 mm (hand protection), Protection field height up to 2400 mm, Self-testing (type 2 as per IEC/EN 61496-1), SIL1 acc. to IEC 61508, Sensing range up to 20 m, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 60 mm , Protection field height up to 2400 mm, Self-testing (type 2 as per IEC/EN 61496-1), SIL1 acc. to IEC 61508, Degree of protection IP67, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 60 mm , Protection field height up to 2400 mm, Self-testing (type 2 as per IEC/EN 61496-1), SIL1 acc. to IEC 61508, Sensing range up to 20 m, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 90 mm, Protection field height up to 2400 mm, Self-testing (type 2 as per IEC/EN 61496-1), SIL1 acc. to IEC 61508, Degree of protection IP67, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 90 mm, Protection field height up to 2400 mm, Self-testing (type 2 as per IEC/EN 61496-1), SIL1 acc. to IEC 61508, Sensing range up to 20 m, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 14 mm (finger protection), Protection field height up to 1200 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), SIL3 (IEC 61508), Degree of protection IP67, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m
, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 1200 mmfa
Resolution 30 mm (hand protection), Protection field height up to 2400 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), SIL3 (IEC 61508), Degree of protection IP67, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 30 mm (hand protection), Protection field height up to 2400 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), SIL3 (IEC 61508), Sensing range up to 20 m, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 60 mm , Protection field height up to 2400 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), SIL3 (IEC 61508), Degree of protection IP67, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 60 mm , Protection field height up to 2400 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), SIL3 (IEC 61508), Sensing range up to 20 m, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 90 mm, Protection field height up to 2400 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), SIL3 (IEC 61508), Degree of protection IP67, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Resolution 90 mm, Protection field height up to 2400 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), SIL3 (IEC 61508), Sensing range up to 20 m, Connection: Transmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m, Operating mode: Startup/restart disable, deactivateable, Protection field height: see Table 1, max. 2400 mmfa
Rotation-invariant deflection of a light beam by 90° in the plane of incidence, making it highly vibration-resistant, Translation-free deflection with no lateral beam shift with OMH-SLCT-200 floor mount, Silver-coated mirror glass, Mirror glass with low light absorption, Up to ∅ 48 mm pencil of rays in the plane of incidencefa
Rotation-invariant deflection of a light beam by 90° in the plane of incidence, making it highly vibration-resistant, Translation-free deflection with no lateral beam shift with OMH-SLCT-200 floor mount, Silver-coated mirror glass, Mirror glass with low light absorption, Up to ∅ 48 mm pencil of rays in the plane of incidencefa
Rotation-invariant deflection of a light beam by 90° in the plane of incidence, making it highly vibration-resistant, Translation-free deflection with no lateral beam shift with OMH-SLCT-200 floor mount, Silver-coated mirror glass, Mirror glass with low light absorption, Up to ∅ 48 mm pencil of rays in the plane of incidencefa
Deflecting mirror for multi-sided protection safety layouts using SLC series safety light gridsfa
Deflecting mirror for multi-sided protection safety layouts using SLC series safety light gridsfa
Deflecting mirror for multi-sided protection safety layouts using SLC series safety light gridsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Very short response time, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Very short response time, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Very short response time, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protection field height up to 750 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Very short response time, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Very short response time, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: Emitter: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2
Receiver: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: Startup/restart disable preset
with Relay monitor (preset)fa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protection field height up to 750 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protection field height up to 750 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2
Receiver: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: Startup/restart disable preset
with Relay monitor (preset)fa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protection field height up to 750 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2
Receiver: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: Startup/restart disable preset
with Relay monitor (preset)fa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 5 m, Resolution 14 mm (finger protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Deflecting mirror for multi-sided protection safety layouts using SLC series safety light gridsfa
Deflecting mirror for multi-sided protection safety layouts using SLC series safety light gridsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Start/Restart disable , Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Start/Restart disable , Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Deflecting mirror for multi-sided protection safety layouts using SLC series safety light gridsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Start/Restart disable , Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protection field height up to 1650 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protection field height up to 1650 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 8-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protection field height up to 1650 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protection field height up to 1650 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protection field height up to 1650 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protection field height up to 1650 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2
Receiver: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: Startup/restart disable preset
with Relay monitor (preset)fa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protection field height up to 1650 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2
Receiver: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: Startup/restart disable preset
with Relay monitor (preset)fa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protection field height up to 1650 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2
Receiver: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: Startup/restart disable preset
with Relay monitor (preset)fa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protection field height up to 1650 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2
Receiver: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: Startup/restart disable preset
with Relay monitor (preset)fa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protection field height up to 1650 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2
Receiver: terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: Startup/restart disable preset
with Relay monitor (preset)fa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 30 mm (hand protection), Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Start/Restart disable , Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Deflecting mirror for multi-sided protection safety layouts using SLC series safety light gridsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Start/Restart disable , Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Degree of protection IP67, Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Start/Restart disable , Connection: Emitter: M12 connector, 4-pin Receiver: M12 connector, 8-pin, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 20 m, 2, 3, and 4-beam design, Beam distance 300, 400 and 500 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Start/Restart disable , Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Deflecting mirror for multi-sided protection safety layouts using SLC series safety light gridsfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 60 mm , Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Deflecting mirror for multi-sided protection safety layouts using SLC series safety light gridsfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 separated fail safe semiconductor outputsfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: in the master, Safety output: in the masterfa
Sensing range up to 15 m , Resolution 90 mm, Protective field height up to 1800 mm, Self-monitoring (type 4 according to IEC/EN 61496-1), Master/Slave detection, Plug and Play, Connection: M20 cable gland ,
terminal compartment with screw terminals, lead cross-section max. 1.5 mm2, Operating mode: can be selected with or without start/restart disable, Safety output: 2 relay outputs, force-guided NO-contactfa
Functional Safety Hub from Pepperl+Fuchs

Several hundred products with a SIL/PL assessment, free tools, and brochures in one place: the "Functional Safety Hub" is your starting point when you have to implement safety functions.