Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of
SB4 Module 2E/165
| Product Description |
| Safety control unit module |
| General specifications |
| Operating mode | Startup/restart disable, relay monitor, emergency off, turn off time |
| Functional safety related parameters |
| Safety Integrity Level (SIL) | SIL 3 |
| Performance level (PL) | PL e |
| Category | Cat. 4 |
| Mission Time (TM) | 20 a |
| Indicators/operating means |
| Function indicator | LED red: OSSD OFF
LED green: OSSD ON Yellow LED: start readiness LED yellow (2x): indicator lamp channel 1 ... 2 |
| Electrical specifications |
| Operating voltage | 24 V DC ± 20 % ,
24 V DC ± 20 % , via SB4 Housing |
| Output |
| Safety output | 2 relay outputs, force-guided NO-contact |
| Signal output | Output for displaying the switching state of the OSSDs |
| Switching voltage | 10 V ... 250 V AC/DC |
| Switching current | min. 10 mA , max. 6 A AC/DC |
| Conformity |
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 |
| Product standard | EN 61496-1 |
| Mechanical specifications |
| Degree of protection | IP20 |
| Connection | Cage tension spring terminals , Cable cross-section 0.2 ... 1.5 mm2 |
Documents:
SB4 Module 2E/165
Approvals+Certificates:
SB4 Module 2E/165
Software:
SB4 Module 2E/165
Associated Products:
SB4 Module 2E/165
| Accessories |
|
|
|
| cover sheetfa |
|
|
|
|
| Empty housing for Evaluation unit SB4fa |
|
|
|
|
|
| Empty housing for Evaluation unit SB4fa |
|
|
|
|
|
| Empty housing for Evaluation unit SB4fa |
|
|
|
|
|
| Empty housing for Evaluation unit SB4fa |
|
|
|
|
|
| Empty housing for Evaluation unit SB4fa |
|
|
|
|
|
| Empty housing for Evaluation unit SB4fa |
|
+49 621 776-0