Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Thru-beam sensor OBE12M-R101-S2EP-IO-V31

OBE12M-R101-S2EP-IO-V31
  • Miniature design with versatile mounting options
  • IO-link interface for service and process data
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Extended temperature range
    -40°C ... 60°C
  • High degree of protection IP69K

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of OBE12M-R101-S2EP-IO-V31

Product Description
Thru-beam sensor SET
System components
EmitterOBE12M-R101-S-IO-V31
ReceiverOBE12M-R101-2EP-IO-V31
General specifications
Effective detection range0 ... 12 m
Threshold detection range15 m
Light sourceLED
Light typemodulated visible red light
LED risk group labellingexempt group
Diameter of the light spotapprox. 65 mm at a distance of 1 m
Angle of divergence3.7 °
Ambient light limitEN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTFd462 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicatorYellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Control elementsReceiver: light/dark switch
Control elementsReceiver: sensitivity adjustment
Parameterization indicatorIO link communication: green LED goes out briefly (1 Hz)
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply currentEmitter: ≤ 14 mA
Receiver: ≤ 13 mA at 24 V supply voltage
Protection classIII
Interface
Interface typeIO-Link ( via C/Q = pin 4 )
Transfer rateCOM 2 (38.4 kBaud)
IO-Link Revision1.1
Min. cycle time2.3 ms
Process data witdhEmitter:
Process data output: 2 Bit
Receiver:
Process data input: 2 Bit
Process data output: 2 Bit
SIO mode supportyes
Device IDEmitter: 0x110401 (1115137)
Receiver: 0x110301 (1114881)
Compatible master port typeA
Input
Test inputemitter deactivation at +UB
Output
Switching typeThe switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Signal output2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA , resistive load
Usage categoryDC-12 and DC-13
Voltage drop≤ 1.5 V DC
Switching frequency1000 Hz
Response time0.5 ms
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 60947-5-2:2007+A1:2012
Standard conformity
Product standardEN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
StandardsUL 60947-5-2: 2014
IEC 61131-9:2013
EN 62471:2008
EN 61131-9:2013
Approvals and certificates
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width18.3 mm
Housing height13.9 mm
Housing depth33.8 mm
Degree of protectionIP67 / IP69 / IP69K
ConnectionM8 x 1 connector, 4-pin
Material
HousingPC (Polycarbonate)
Optical facePMMA
MassEmitter: approx. 10 g receiver: approx. 10 g

Documents: OBE12M-R101-S2EP-IO-V31

Product informationLanguageFile TypeFile Size
R101 Series - An Innovative Family of Small Photoelectric Sensors (USA-English) / ProduktinformationUSAPDF322 KB

Approvals+Certificates: OBE12M-R101-S2EP-IO-V31

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-1000DPDF162 KB
Certificates
Canada USA UL Ordinary Location20170306-E87056PDF407 KB
Pepperl+Fuchs IO-Link Manufacturer DeclarationCERT-4434PDF228 KB
Pepperl+Fuchs IO-Link Manufacturer DeclarationCERT-4433PDF228 KB

Software: OBE12M-R101-S2EP-IO-V31

Device type managersRelease InfoFile TypeFile Size
IODD for OBE R100/R101 series (emitter) / IODD für OBE R100/R101 Serie (Sender)1.00.004 / 2018-12-15ZIP1043 KB
IODD for OBE R100/R101 series (receiver) / IODD für OBE R100/R101 Serie (Empfänger)1.00.002 / 2018-08-15ZIP575 KB

Associated Products: OBE12M-R101-S2EP-IO-V31

Accessories

Female cordset, M8, 4-pin, PUR cablefa

Female cordset, M8, 4-pin, PUR cablefa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Mounting Clampfa
Mounting Clampfa
Mounting Clampfa
Mounting bracket fa
Mounting bracket fa
Mounting bracket fa