Serviceline Industrial Sensors
Serviceline Explosion Protection
Thru-beam sensor (pair) OBE25M-R201-S2EP-IO-V1
- Medium design with versatile mounting options
- IO-link interface for service and process data
- Various frequencies for avoiding mutual interference (cross-talk immunity)
- Extended temperature range
-40°C ... 60°C - High degree of protection IP69K
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of OBE25M-R201-S2EP-IO-V1
| Product Description | ||
|---|---|---|
| Thru-beam sensor SET | ||
| System components | ||
|---|---|---|
| Emitter | OBE25M-R201-S-IO-V1 | |
| Receiver | OBE25M-R201-2EP-IO-V1 | |
| General specifications | ||
| Effective detection range | 0 ... 25 m | |
| Threshold detection range | 33 m | |
| Light source | LED | |
| Light type | modulated visible red light | |
| LED risk group labelling | exempt group | |
| Alignment aid | LED red (in receiver lens) illuminated constantly: beam is interrupted, flashes: reaching switching point, off: sufficient stability control |
|
| Diameter of the light spot | approx. 850 mm at a distance of 25 m | |
| Angle of divergence | approx. 2 ° | |
| Ambient light limit | EN 60947-5-2 : 40000 Lux | |
| Functional safety related parameters | ||
| MTTFd | 462 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 60 % | |
| Indicators/operating means | ||
| Operation indicator | LED green: constantly on - power on flashing (4Hz) - short circuit flashing with short break (1 Hz) - IO-Link mode |
|
| Function indicator | Yellow LED: Permanently lit - light path clear Permanently off - object detected Flashing (4 Hz) - insufficient operating reserve |
|
| Control elements | Receiver: light/dark switch | |
| Control elements | Receiver: sensitivity adjustment | |
| Electrical specifications | ||
| Operating voltage | 10 ... 30 V DC | |
| Ripple | max. 10 % | |
| No-load supply current | Emitter: ≤ 15 mA Receiver: ≤ 15 mA at 24 V Operating voltage |
|
| Protection class | III | |
| Interface | ||
| Interface type | IO-Link ( via C/Q = pin 4 ) | |
| Device profile | Identification and diagnosis Smart Sensor: Receiver: type 2.4 Emitter: - |
|
| Transfer rate | COM 2 (38.4 kBaud) | |
| IO-Link Revision | 1.1 | |
| Min. cycle time | 2.3 ms | |
| Process data width | Emitter: Process data input: 0 bit Process data output: 1 bit Receiver: Process data input: 2 bit Process data output: 2 bit |
|
| SIO mode support | yes | |
| Device ID | Emitter: 0x111411 (1119249) Receiver: 0x111311 (1118993) |
|
| Compatible master port type | A | |
| Input | ||
| Test input | emitter deactivation at +UB | |
| Output | ||
| Switching type | The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on |
|
| Signal output | 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected | |
| Switching voltage | max. 30 V DC | |
| Switching current | max. 100 mA , resistive load | |
| Usage category | DC-12 and DC-13 | |
| Voltage drop | ≤ 1.5 V DC | |
| Switching frequency | 1000 Hz | |
| Response time | 0.5 ms | |
| Conformity | ||
| Communication interface | IEC 61131-9 | |
| Product standard | EN 60947-5-2 | |
| Approvals and certificates | ||
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
|
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Mechanical specifications | ||
| Housing width | 15 mm | |
| Housing height | 61.7 mm | |
| Housing depth | 41.7 mm | |
| Degree of protection | IP67 / IP69 / IP69K | |
| Connection | 4-pin, M12 x 1 connector, 90° rotatable | |
| Material | ||
| Housing | PC (Polycarbonate) | |
| Optical face | PMMA | |
| Mass | Emitter: approx. 47 g receiver: approx. 47 g | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 11.0 | 27270901 |
| ECLASS 10.0.1 | 27270901 |
| ECLASS 9.0 | 27270901 |
| ECLASS 8.0 | 27270901 |
| ECLASS 5.1 | 27270901 |
| ETIM 8.0 | EC002716 |
| ETIM 7.0 | EC002716 |
| ETIM 6.0 | EC002716 |
| ETIM 5.0 | EC002716 |
| UNSPSC 12.1 | 39121528 |
Documents: OBE25M-R201-S2EP-IO-V1
| Technical information | Language | File Type | File Size |
|---|---|---|---|
| Installation and user instructions for offline parameterization of IO-Link sensors | ENG | 1788 KB | |
| Installations-/Benutzeranweisungen für die Offline-Parametrierung von IO-Link-Sensoren | GER | 1764 KB | |
| Product information | |||
| Product information R10x and R20x Series Standard Housings - All Sensing Modes | ENG | 1783 KB | |
| Produktinformation Serien R10x und R20x Alle Funktionsprinzipien - In Standardgehäusen | GER | 1799 KB | |
CAD+CAE: OBE25M-R201-S2EP-IO-V1
| CAD | File Type | File Size | |
|---|---|---|---|
| 3-D model / 3-D-Modell | STP | 1433 KB | |
| CAD Portal / CAD Portal | LINK | --- | |
| EPLAN | |||
| EPLAN Data Portal / EPLAN Data Portal | LINK | --- | |
| EPLAN macro P+F.OBE25M-R201-S2EP-IO-V1 / EPLAN-Makro P+F.OBE25M-R201-S2EP-IO-V1 | EDZ | 88 KB | |
Approvals+Certificates: OBE25M-R201-S2EP-IO-V1
| Statements of compliance | Certificate No. | File Type | File Size |
|---|---|---|---|
| Declaration of Conformity for simple apparatus / Konformitätserklärung für einfache Betriebsmittel | DOC-3935 | 162 KB | |
| Certificates | |||
| Canada USA UL Ordinary Location | 20170306-E87056 | 407 KB | |
| IO-Link Manufacturer Declaration | CERT-4524 | 212 KB | |
Software: OBE25M-R201-S2EP-IO-V1
| IO Device Description (IODD) | Release Info | File Type | File Size |
|---|---|---|---|
| IODD for OBE-R201 series (emitter) / IODD für OBE-R201 Serie (Sender) | V1.00.002 / 2018-09-30 | ZIP | 697 KB |
| IODD for OBE-R201 series (receiver) / IODD für OBE-R201 Serie (Empfänger) | V1.00.004 / 2020-02-20 | ZIP | 863 KB |
| Software Tools | |||
| IO-Link Offline Parameterization Tool / IO-Link Offline-Parametriertool | V1.00.005 / 2021-07-01 | ZIP | 64072 KB |
Associated Products: OBE25M-R201-S2EP-IO-V1
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Function: OBE25M-R201-S2EP-IO-V1
The optical sensors in the series are the first devices to offer an end-to-end solution in a medium-sized standard design – from the thru-beam sensor through to the measuring distance sensor. As a result of this design, the sensors are able to perform practically all standard automation tasks.
The entire series enables sensors to communicate via IO-Link.
The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor.
Multi Pixel Technology (MPT) ensures that the standard sensors are flexible and can be adapted to the application environment.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2021 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.