Serviceline Industrial Sensors
Serviceline Explosion Protection
Not available for purchase

Stationary read device OPD60W-F200-R2

OPD60W-F200-R2
  • Reads 1-D and 2-D codes at extremely high speeds of up to 10 m/s at 30 readings/s
  • Reads barcodes up to 200 mm long
  • Code quality index output
  • Logo comparison
  • Rotary encoder input

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  OPD60W-F200-R2

Product Description
Optical Print Inspector, reads all common 1-D and 2-D codes, detects logos, Ethernet, RS 232, speeds of up to 10 m/s
General specifications
SymbologiesData Matrix, Code 39, Code 128, Int 2 of 5, EAN13, Pharmacode
Read distance60 mm
Reading field70 mm x 45 mm
Modul sizemin. 0.5 mm
Functional safety related parameters
MTTFd40.5 a
Mission Time (TM)8 a
Diagnostic Coverage (DC)0 %
Electrical specifications
Operating voltage24 V DC ± 15% , PELV
No-load supply currentmax. 250 mA
Power consumption6 W
Interface
Interface typeserial , RS 232
Transfer ratemax. 115.2 kBit/s
Cable lengthmax. 30 m
Interface 1
Interface typeEthernet
ProtocolTCP/IP
Transfer rate100 MBit/s
Input
Switching thresholdlow: < 10 V, high: > 15 V
Cable lengthmax. 30 m
Output
Switching typePNP
Cable lengthmax. 30 m
Compliance with standards and directives
Standard conformity
Noise immunityEN 61326-1
Emitted interferenceEN 61000-6-4
Degree of protectionEN 60529
Laser classIEC 60825-1:2007
Approvals and certificates
ApprovalsCE
Ambient conditions
Ambient temperature0 ... 45 °C (32 ... 113 °F)
Storage temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protectionIP67
Connection8-pin, M12x1 connector, standard (supply+IO) ,
5-pin, M12x1 socket, standard (RS 232) ,
4-pin, M12x1 socket, standard (LAN)
Material
HousingPC/ABS
Installation4 x M6 threading
Massapprox. 160 g

Documents: OPD60W-F200-R2

ManualsLanguageFile TypeFile Size
Manual optical print inspector OPC / OPD / OPEENGPDF3691 KB
Handbuch Optical Print Inspector OPC/OPD/OPEGERPDF1827 KB
Short instructions, safety information
Quick Start Guide optical print inspector OPC / OPD / OPEENGPDF1710 KB
Kurzanleitung Optical Print Inspector OPC/OPD/OPEGERPDF1694 KB

Software: OPD60W-F200-R2

Software ToolsRelease InfoFile TypeFile Size
Software Vision Configurator / Software Vision ConfiguratorV6.0.00.4916ZIP62033 KB
VSX-Interface libraries for communication with VSX sensors / Libraries zur Kommunikation mit VSX-SensorenV6.0.02.4945ZIP18196 KB

Associated Products: OPD60W-F200-R2

Accessories

Female connector, M12, 8-pin, shielded, field attachablefa
Female cordset, M12, 8-pin, shielded, PUR cablefa
Male cordset, M12, 5-pin, shielded, PUR cablefa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Mounting bracket for PCV* read headfa

Function: OPD60W-F200-R2

With the Optical Print Inspector, Pepperl+Fuchs provides the solution to code reading and detection tasks in the field of printing, paper, and packaging.

Whether reading 1D and 2D codes at high speeds, at varying intervals, with reflective surfaces, with overly long barcodes or performing diverse detection tasks — with the Optical Print Inspector, you always have the right Vision Sensor at your disposal.