Serviceline Industrial Sensors
Serviceline Explosion Protection
SMART Transmitter Power Supplies HiD3010
- 2-channel
- Fully floating operation
- Analog input or output on both channels
- 2-wire SMART transmitters or current sources
- SMART I/P and valve positioners
- Connections to HART multiplexer and HART HHC
- Line fault detection (LFD)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of HiD3010
| Supply | ||
|---|---|---|
| Connection | via Termination Board | |
| Rated voltage | 20.4 ... 30 V | |
| Rated current | 50 mA at 24 V, 20 mA output (per channel) | |
| Power dissipation | 0.9 W at 24 V (per channel) | |
| Input | ||
| Input current | 0 ... 24 mA , overload-protected | |
| Input resistance | 50 Ω , PTC protected | |
| Voltage | 15 V at 20 mA | |
| Output | ||
| Connection | terminals 1+, 4, 7-; 2+, 5; 6- | |
| Current range | 0 ... 20 mA | |
| Load | 0 ... 750 Ω | |
| Response time | 40 ms , 10 ... 90 % step change | |
| Transfer characteristics | ||
| Calibrated accuracy | < 20 µA, 10 µA typ. | |
| Influence of temperature | < ± 0.01%/K < ± 0.005%/K typisch | |
| Influence of load | < ± 0.1 % of full-scale value from 0 ... 750 Ω | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 89/336/EEC | EN 61326 | |
| Conformity | ||
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 60 °C (32 ... 140 °F) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Relative humidity | 5 ... 90 %, non-condensing up to 35 °C (95 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP30 | |
| Material | Polycarbonate | |
| Mass | approx. 140 g | |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) | |
| Height | 106 mm | |
| Width | 18 mm | |
| Length | 128 mm | |
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | CESI 03 ATEX 061 , for additional certificates see www.pepperl-fuchs.com | |
| Marking |  II (1)GD [EEx ia] IIC [circuit(s) in zone 0/1/2] |
|
| Input | EEx ia IIC | |
| Voltage | 26.1 V | |
| Current | 93 mA | |
| Power | 607 mW | |
| Supply | ||
| Maximum safe voltage | 42 V AC / 60 V DC | |
| Galvanic isolation | ||
| Input/input | safe galvanic isolation acc. to EN 50020, 500 Vrms | |
| Input/Output | safe galvanic isolation acc. to EN 50020, 1500 Vrms | |
| Input/power supply | safe galvanic isolation acc. to EN 50020, 1500 Vrms | |
| Directive conformity | ||
| Directive 94/9/EC | EN 50014, EN 50020, EN 50284 | |
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210119 |
| ECLASS 12.0 | 27210119 |
| ECLASS 11.0 | 27210119 |
| ECLASS 10.0.1 | 27210119 |
| ECLASS 9.0 | 27210119 |
| ECLASS 8.0 | 27210119 |
| ECLASS 5.1 | 27210119 |
| ETIM 9.0 | EC001485 |
| ETIM 8.0 | EC001485 |
| ETIM 7.0 | EC001485 |
| ETIM 6.0 | EC001485 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 32101514 |
Details: HiD3010
Datasheet: HiD3010
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet | 74 KB |
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.