Serviceline Industrial Sensors
Serviceline Explosion Protection
Frequency converter KSD2-FI-Ex
- 1-channel
- Input EEx ia IIC
- Device installation in Zone 2
- Lead breakage (LB) and short-circuit (SC) monitoring
- Frequency measurement, pulse-rate measurement, flow-rate measurement
- Rotation direction detection, flow direction detection
- Rotational speed monitoring
- Standstill monitoring
- Batch controller
- EMC acc. to NAMUR NE 21
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of KSD2-FI-Ex
| Supply | ||
|---|---|---|
| Connection | Power Rail | |
| Rated voltage | 20 ... 30 V DC | |
| Ripple | < 10 % | |
| Power consumption | 1 W | |
| Input | ||
| Connection | terminals 2+, 3-; 5+, 6- | |
| Rated values | acc. to EN 60947-5-6 (NAMUR) | |
| Open circuit voltage/short-circuit current | approx. 8 V DC / approx. 8 mA | |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA | |
| Pulse/Pause ratio | 40 ... 60 % of period at 1000 Hz , 10 ... 90 % of period at 250 Hz | |
| Line fault detection | breakage I < 0.1 mA , short-circuit I > 6 mA | |
| Output | ||
| Interface | CAN protocol via Power Rail bus | |
| Connection | Power Rail | |
| Transfer characteristics | ||
| Deviation | < 0.1 % | |
| Switching frequency | 0.3 ... 1500 Hz If the maximum input frequency of 1500 Hz is exceeded, the signal value is undefined! No further messages. |
|
| Rotation direction detection | < 350 Hz Phase difference between pulse input signal and auxiliary pulse signal min. ± 700 µs (= ± 90 ° at 350 Hz) |
|
| Galvanic isolation | ||
| Input/power supply, internal bus | basic insulation acc. to EN 50178:1997, rated insulation voltage 253 V AC | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2004/108/EC | EN 61326-1:2006 | |
| Explosion protection | ||
| Directive 94/9/EC | EN 60079-0:2006, EN 60079-11:2007, EN 60079-15:2005 | |
| Standard conformity | ||
| Insulation coordination | EN 50178:1997 | |
| Galvanic isolation | EN 60079-11:2007 | |
| Electromagnetic compatibility | NE 21:2006 | |
| Degree of protection | IEC 60529 | |
| Climatic conditions | IEC 60721 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Damaging gas | acc. to ISA-S71.04-1985, severity level G3 | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | terminal connection ≤ 2.5 mm2 | |
| Mass | approx. 100 g | |
| Dimensions | 20 x 100 x 115 mm (0.8 x 3.9 x 4.5 inch) | |
| Mounting | DIN rail mounting | |
| Data for application in connection with hazardous areas | ||
| EC-Type Examination Certificate | ZELM 99 ATEX 0012 , for additional certificates see www.pepperl-fuchs.com | |
| Group, category, type of protection |  II (1)GD [EEx ia] IIC |
|
| Voltage | 9.6 V | |
| Current | 16 mA | |
| Power | 38 mW (linear characteristic) | |
| Statement of conformity | TÜV 00 ATEX 1617 X , observe statement of conformity | |
| Group, category, type of protection, temperature class | II 3G EEx nA II T4 |
|
| Galvanic isolation | ||
| Input/power supply, internal bus | safe galvanic isolation acc. to EN 60079-11:2007 | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210128 |
| ECLASS 12.0 | 27210128 |
| ECLASS 11.0 | 27210128 |
| ECLASS 10.0.1 | 27210128 |
| ECLASS 9.0 | 27210128 |
| ECLASS 8.0 | 27210190 |
| ECLASS 5.1 | 27210121 |
| ETIM 9.0 | EC002918 |
| ETIM 8.0 | EC002918 |
| ETIM 7.0 | EC002918 |
| ETIM 6.0 | EC002918 |
| ETIM 5.0 | EC002475 |
| UNSPSC 12.1 | 39121007 |
Details: KSD2-FI-Ex
Datasheet: KSD2-FI-Ex
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet KSD2-FI-Ex | 163 KB | |
| Datenblatt KSD2-FI-Ex | 164 KB |
Documents: KSD2-FI-Ex
| Manuals | File Type | File Size |
|---|---|---|
| Manual | 8037 KB | |
| Handbuch | 8686 KB | |
| Instruction manuals | ||
| Operating instructions RPI-System | 1459 KB | |
| Betriebsanleitung RPI-System | 1461 KB |
Approvals+Certificates: KSD2-FI-Ex
| Certificates | File Type | File Size |
|---|---|---|
| TUV Nord IECEx Certificate of Conformity | LINK | --- |
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.