Valve Coupler FD0-VC-EX4.PA

For four intrinsically safe valves with position sensors
Installation in Zone 1 and Zone 2
Valves in Zone 0
Connection to fieldbus acc. to FISCO or Entity
For PROFIBUS PA
PCS integration with FDT/DTM technology
Monitors lead breakage and short circuits
Valve monitoring and diagnostics integrated
Conducts partial stroke testing
Conforms to PROFIBUS PA profile

Technical Data
Informative Literature
Product Documentation
Approvals
Software

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Descargue la hoja de datos completa en PDF:

Extracto de la hoja de datos: Información técnica del FD0-VC-EX4.PA

General specifications
Design / Mounting		Outside installation
Fieldbus connection
PROFIBUS PA
	Connection	Connection +, -
	Rated voltage	9 ... 32 V
	Rated current	max. 23 mA
	Baud rate	31.25 kBit/s
	Protocol	IEC 61158-2
	Terminal "S"	only for the connection of the cable screen (BUS) and/or the potential compensation
	Terminal "PA"	only for the connection of the cable screen (sensor interface) and/or grounding
	Grounding plate	only for the connection of the potential compensation
Field circuit
Inputs
	Connection	8, for binary sensors: terminals 3, 4, 7, 8, 11, 12, 15, 16
	Sensor supply voltage	5 V
	Sensor supply current	5 mA
	Time delay before availability	2 ms
	Max. cycle time	max. 160 ms
Outputs
	Connection	terminals 1+, 2-; 5+, 6-; 9+, 10-; 13+, 14-
	Output voltage	6.4 ... 7.9 V
	Output rated operating current	1.5 mA
	Holding current	1 mA
Galvanic isolation
PROFIBUS PA/Field circuit		safe galvanic isolation acc. to EN 60079-11, voltage peak value 60 V
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Galvanic isolation		EN 60079-11
Electromagnetic compatibility		NE 21:2006
Degree of protection		IEC/EN 60529
Fieldbus standard		IEC 61158-2
Ambient conditions
Ambient temperature		-20 ... 70 °C (-4 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Core cross section		Bus cable: ∅ 5 mm ... 10 mm Cable sensors/valve: ∅ 4 mm ... 8 mm
Housing		187 mm x 129 mm x 46 mm
Degree of protection		IP65
Installation position		Cable glands downwards
Mass		approx. 290 g
Mounting		wall mounting
Data for application in connection with hazardous areas
EU-type examination certificate		PTB 98 ATEX 2210
	Marking	II 2G (1) Ex ia [ia Ga] IIC T4 Gb , II (1D) [Ex ia Da] IIIC , II 3G Ex ic IIC T4 Gc , II (3D) [Ex ic Dc] IIIC
PROFIBUS PA
	Voltage	24 V
	Current	380 mA
	Power	5.32 W
	Rated voltage	9 ... 32 V
	Rated current	23 mA
	FDE (Fault Disconnect Equipment)	6.7 mA
	Terminal "S"	only for the connection of the cable screen (BUS) and/or the potential compensation
	Terminal "PA"	only for the connection of the cable screen (sensor interface) and/or grounding
	Grounding plate	only for the connection of the potential compensation
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-11:2012
International approvals
IECEx approval		IECEx TUN 04.0002
	Approved for	Ex ia [ia Ga] IIC T4 Gb , [Ex ia Da] IIIC , Ex ic IIC T4 Gc , [Ex ic Dc] IIIC
General information
Supplementary information		EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242610
ECLASS 12.0	27242610
ECLASS 11.0	27242610
ECLASS 10.0.1	27242610
ECLASS 9.0	27242610
ECLASS 8.0	27242610
ECLASS 5.1	27242610
ETIM 9.0	EC001601
ETIM 8.0	EC001601
ETIM 7.0	EC001601
ETIM 6.0	EC001601
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: FD0-VC-EX4.PA

Informative Literature: FD0-VC-EX4.PA

Literature	Idioma	Tipo de archivo	Tamaño
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB

Product Documentation: FD0-VC-EX4.PA

System Descriptions	Idioma	Tipo de archivo	Tamaño
Planning and integration: Compatibility list of sensors and pilot valves	ENG	PDF	50 KB
Manuals
Manual FD0-VC-Ex4.PA	ENG	PDF	956 KB
Software Information
Release Information FD0-VC-Ex4.PA DTM	ENG	PDF	406 KB
Release information DD/GSD files	ENG	PDF	325 KB

Approvals: FD0-VC-EX4.PA

Certificates	Número de Certificado	Idioma	Tipo de archivo	Tamaño
Europe PTB II 2 G (1) II (1D) II (3D) II 3 G ATEX	PTB 98 ATEX 2210	ALL	PDF	1378 KB
TUV Nord IECEx Certificate of Conformity	IECEx TUN 04.0002	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0812B	ALL	PDF	88 KB

Software: FD0-VC-EX4.PA

Device Description Files/Drivers	Liberar Info	Tipo de archivo	Tamaño
Device Driver / Gerätetreiber	1.3	ZIP	259 KB
GSD / GSD	Rev. 1.5	ZIP	4 KB
Software Tools
FD0-VC-Ex4.PA DTM / FD0-VC-Ex4.PA DTM	1.5.97.14	ZIP	20003 KB

Notas generales sobre la información de los productos de Pepperl+Fuchs

Enlaces directos

Multientrada/salida FieldConnex®

La multientrada/salida FieldConnex brinda a los usuarios nuevas posibilidades para captar las señales digitales de entrada y salida en la automatización de procesos...

Productos

Tecnología de bus de campo para zona segura o cualquier área peligrosa

Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
phone +49 621 776-0

Pepperl + Fuchs es líder en el desarrollo y la fabricación de sensores electrónicos y componentes para el mercado de la automatización global. Su incesante innovación, calidad duradera y crecimiento constante garantizan el éxito continuado, desde hace más de 70 años. Pepperl + Fuchs emplea a 6.300 personas en todo el mundo y cuenta con fábricas en Alemania, EE.UU., Singapur, Hungría, Indonesia y Vietnam, la mayoría de ellas con certificado ISO 9001.