Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Product Description |
---|
FDT Framework |
Interface | ||
---|---|---|
Connection | adapter with USB interface K-ADP-USB (for K-System) adapter for gateways with RS-232 intrface K-ADP2 (for RPI-System) adapter for gateways with RS-485 interface K-ADP4 (for RPI-System) USB/RS-485 interface converter (for LB-System) |
|
Software | ||
Hardware requirements | PACTware 3.X requires 50 MBytes hard drive memory and a minimum of 40 MBytes main memory. Depending on the complexity of the projects and the DTMs used, the main memory requirement can be greater. A computer with a Pentium IV 450 MHz processor or better is recommended, XGA graphics, and a Microsoft-compatible mouse or equivalent pointing device arealso required. | |
Software requirements | PACTware 3.X runs in operating systems Windows 2000 and Windows XP. The software .NET Framework 1.1 SP1 must be installed. For printing and online help, MS Internet Explorer 4.0 or higher is required. | |
Languages | German, English, French, Spanish, Russian can be selected | |
Licensing | PACTware 3.X does not require licensing. Please take the license conditions of the DTMs out of the datasheets of the corresponding DTMs. | |
Configuration | ||
Representation of the system configuration | Graphic representation of all communication and device type managers in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be opened simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously. | |
System planning, application processing | Generation of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels. | |
Associated products | CD-ROM with PACTware 3.X and complete DTM-Collection of all available DTMs of the Pepperl+Fuchs H-, K-, and E-System devices, HART Multiplexers, Remote I/O-Systems, FieldConnex devices, and level devices. |
System | Classcode |
---|---|
ECLASS 13.0 | 27242501 |
ECLASS 12.0 | 27242501 |
ECLASS 11.0 | 27242501 |
ECLASS 10.0.1 | 27242501 |
ECLASS 9.0 | 27242501 |
ECLASS 8.0 | 27242501 |
ECLASS 5.1 | 27242501 |
ETIM 9.0 | EC000757 |
ETIM 8.0 | EC000809 |
ETIM 7.0 | EC000809 |
ETIM 6.0 | EC000809 |
ETIM 5.0 | EC000809 |
UNSPSC 12.1 | 43232901 |
PACTware™ is a manufacturer- and fieldbus-independent software configuration tool with FDT (Field Device Tool) interface.
Based on FDT technology, this software allows DTMs (Device Type Managers) to be installed for commissioning, configuring, and parameter assignment independent of the process control system.
Communication DTMs are available for K-, E-, and H-Systems, HART Interface Solutions, level control, corrosion, Remote I/O, and fieldbus applications.
For more information, refer to www.pepperl-fuchs.com.
Brief Instructions | Language | File Type | File Size |
---|---|---|---|
Installation instructions DTM Collection | ENG | 3681 KB | |
Manuals | |||
Version history PACTware | ENG | 235 KB |
Frameworks | Release Info | File Type | File Size |
---|---|---|---|
PACTware 3.5 (3.5.0.18) / PACTware 3.5 (3.5.0.18) | 3.5 (3.5.0.18) | ZIP | 41139 KB |