Serviceline Industrial Sensors
Sales phone: 0161 622 6308
Tech phone: 0161 622 6311
Fax: 0161 624 6537
Serviceline Explosion Protection
Sales phone: 0161 622 6309
Tech phone: 0161 622 6313
Fax: 0161 624 6537
Not available for purchase
Not available for purchase

Ultrasonic sensor UCC4000-50GK-B26-8MOL

UCC4000-50GK-B26-8MOL
  • Thread M50
  • PTFE coated transducer
  • Power save mode
  • PWM output
  • Physical LIN interface
  • Serial Interfaces
  • Temperature compensation

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  UCC4000-50GK-B26-8MOL

Product Description
Single head system
General specifications
Sensing range250 ... 4000 mm
Dead band0 ... 250 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 75 kHz
Electrical specifications
Operating voltagefor UART and PWM operation:
UUART/PWM = 2.5 ... 5 V DC, typical 3.3 V
for LIN operation:
ULIN = 8 ... 18 V DC, typical 12 V
No-load supply current≤ 60 mA at 3.3 V DC
≤ 20 mA at 12 V DC
Quiescent current indication< 3 µA during standby mode at UART- and PWM operation
Power consumption≤ 250 mW in the measurement operating mode
Time delay before availability≤ 95 ms
Interface 1
Interface typePhysical LIN interface
Transfer rate19.2 kBit/s (8N1)
Cycle time80 ms
Resolution16 mm (corresponding to 1 LSB)
Interface 2
Interface typeUART 3.3V
Transfer rate19.2 kBit/s (8N1)
Cycle time80 ms
Resolution16 mm (corresponding to 1 LSB)
Input
Input typeStandby active
Signal levellow: 0 ... 0.8 V
Output
Output typePWM output (PNP) , not short-circuit protected
Resolutionpulse length 10 µs /cm
Output currentmax. 10 mA
Temperature influence3 % of full-scale value over the entire temperature range
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN IEC 60947-5-2:2020 : chapter 8.2.6.2.2, 8.2.6.2.3, 8.2.6.3
The sensor is designed to be supplied by a battery. The sensor signals are further processed in a control unit, which is also responsible for EMC protection.
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typefixed cable with plug
Degree of protectionIP66 / IP67 ( connector excluded )
Material
HousingPBT
Transducerepoxy resin/hollow glass bead mixture; Polyurethane foam, PTFE coated
ConnectorMolex connector 70107-0007
Number of pins8
Cable
Length276 mm ± 20 mm
Mass100 g
Dimensions
Height37 mm
Width50 mm
Length50 mm
Factory settings
OutputPWM output (PNP)
Temperature compensation
Address setting 7
Beam widthwide
General information
Scope of delivery2 nuts plastic

Classifications

SystemClasscode
ECLASS 13.027272803
ECLASS 12.027272803
ECLASS 11.027272803
ECLASS 10.0.127272803
ECLASS 9.027272803
ECLASS 8.027272803
ECLASS 5.127272803
ETIM 9.0EC001849
ETIM 8.0EC001849
ETIM 7.0EC001849
ETIM 6.0EC001849
ETIM 5.0EC001849
UNSPSC 12.141111960

Details: UCC4000-50GK-B26-8MOL

Function

The distance measurement is carried out over the runtime of the ultrasonic impulse. A measuring cycle is triggered by sending a start telegram. Once the measurement has been taken, the result is returned in 8-bit form.

Product Documentation: UCC4000-50GK-B26-8MOL

Language Selection:
ManualsLanguageFile TypeFile Size
Manual Ultrasonic Sensors Series UCC****-50GK-B26ENGPDF2313 KB

Approvals: UCC4000-50GK-B26-8MOL

Language Selection:
Declaration of ConformityCertificate No.LanguageFile TypeFile Size
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-4199BALLPDF34 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-5517AALLPDF32 KB