1 axis acceleration sensor, E1-Type approval, Analog output 4 mA ... 20 mA, Fixed evaluation limits , High shock resistance, Teachable zero point, Measuring range -2 g ... +2 g, Increased noise immunity 100 V/mfa
2 axis acceleration sensor, E1-Type approval, Analog output 4 mA ... 20 mA, Fixed evaluation limits , High shock resistance, Teachable zero point, Measuring range -2 g ... +2 g, Increased noise immunity 100 V/mfa
Not available for purchase: For 8 modules, 24 V DC supply, Supported signal types: DI/DO/AI/TI/AO, Hazardous area: screw terminals, blue, Non-hazardous area: screw terminals, black, Number of modules: 8, Number of channels per module: 2 , 4, Signal type: Universal, Manufacturer: Universal, Control system type: Universalpa
Not available for purchase: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Not available for purchase: 1-channel isolated barrier, 24 V DC supply (Power Rail), Thermocouple, RTD, potentiometer or voltage input, Voltage output 0/1 V ... 5 V, Configurable by PACTware, Line fault (LFD) and sensor burnout detection, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 20 ... 30 V DC, Type: 2-wire connection, Type [2]: 3-wire connection, Type [3]: 4-wire connection, Field device: resistance thermometerpa
Not available for purchase: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 1 x relay (change-over contact), Reversible mode of operationpa
Not available for purchase: 1-channel isolated barrier, 115 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 103.5 ... 126 V AC , 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Not available for purchase: 1-channel signal conditioner, Universal usage at different power supplies, Input 2-wire and 3-wire transmitters, current and voltage sources, Current and voltage output, Housing width: 20 mm, Number of channels: 1-channel, Rated voltage: 19 ... 90 V DC / 48 ... 253 V AC, Field device: 2-wire transmitter, Field device [2]: 3-wire transmitter, Field device [3]: current source, Signal: 0/4 ... 20 mA, Signal [2]: 0/2 ... 10 V, Signal: 1 x 0/4 ... 20 mA (current source), Signal [2]: 1 x 0/2 ... 10 Vpa
Not available for purchase: 1-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Fault relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 1-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact)pa
Not available for purchase: 2-channel isolated barrier, 230 V AC supply, Dry contact or NAMUR inputs, Relay contact output, Line fault detection (LFD), Reversible mode of operation, Up to SIL 2 acc. to IEC/EN 61508 / IEC/EN 61511, Housing width: 20 mm, Number of channels: 2-channel, Safety Integrity Level (SIL): SIL 2, Rated voltage: 207 ... 253 V AC, 45 ... 65 Hz, Field device: NAMUR sensor, Field device [2]: volt-free contact, Line fault detection, Type: 2 x relay (change-over contact), Reversible mode of operationpa
Not available for purchase: Switching function: Normally open/closed (NO/NC) programmable, Output type: AS-Interface, Installation: non-flush, Output type: 2-wire, Construction type: VariKont L®, Series: VariKont L®, Operating voltage: 26.5 ... 31.9 V via AS-i bus system, Type of voltage: DC, Connection type: Connector plug M12 x 1 , 4-pin, Housing material: PA, Degree of protection: IP67fa
LearnmoreaboutthesafeabsolutelinearpositioningsystemsfromPepperl+FuchsforsafetyapplicationsuptoSIL3andPL e ... positioningsystemmakessafeabsolutepositioninguptoSIL3/PL e eveninsuchharshenvironmentalconditionspossible. WithitsrobustoutdoorprotectivehousingwithIP69degreeofprotection, it is sealedagainstmoistureandcanalsowithstandsaltwater ...
GetanoverviewofPepperl+Fuchs' broadportfolioofHMIsystemsforprocessindustries ... TheBTC22comesin a ruggedaluminumhousingand is thereforecharacterizedby a highdegreeofinstallationflexibility. WithtwoDisplayPortinterfaces , itsupportsconnectiontotwoUltraHDmonitors (4K) at60Hz. Italsohas a USBtypeC3.2Gen ...
Pepperl+Fuchs’ LoRaWANbasedultrasonicsensorWILSEN is a sturdysolutionforfilllevelmonitoringanddistancemeasurement ... filllevelsofbottlebanks is demonstratedhere. Learnmore (Germanonly) HowDoesitWork? A so-calledLoRaWAN (LongRangeWideAreaNetwork) is requiredtotransfermeasuredvaluesfromtheWILSENIoTsensorsto a cloud-basedIoTplatformand ...
A Pepperl+Fuchsiparikialakításúvékonyklienseit arra tervezték, hogy megbízható és strapabíróvirtualizációsmegoldástkínáljanakiparikörnyezetben, zordkörülmények között is ... meg. Modernszoftverével és számoshardverinterfész-lehetőségével a BTC22jövőbiztosmegoldástjelent. Hosszútávútámogatás több mint 5 éves termékelérhetőséggel Akár 3dbFullHDmonitorcsatlakoztathatóDisplayPorttal és USB-Caltmódban2UltraHD (4K), 60 ...
A Pepperl+FuchsipariFMCWradarosérzékelői nagy olvasásitartománytbiztosítanak, és ideálisak a mobilberendezésekbetörténőintegrálásra ... radarsensorsonmobileequipment . Additionaltextualinformationontheapplicationsshowninthevideocan be foundfurtherdownonthispage. ApplicationsMaterialHandlingWatchthisvideotofindoutmoreabouthowradarsensorsfromPepperl+Fuchs ...
Túlfeszültség elleni védelmitechnológia a folyamatipar számára a Pepperl+Fuchs-tól ... egyszerűsíti a hibaelhárítást. Az M-LB-2000túlfeszültség elleni védelmirendszerfőbbjellemzőiKompakt, 6,2mm-esszélesség a kisebbhelyigényértDugaszolhatómodulok a lehetőlegegyszerűbbtelepítésérdekébenHurokleválasztás az egyszerűkarbantartás ...
A Pepperl+Fuchs a teljes hidrogénértékláncotlefedőszéleskörűportfóliótkínálFedezze fel a hidrogéniparralkapcsolatostevékenységeinket! ... érzékelőtechnológiájával és robbanásvédelmével. Érzékelőtechnológia és robbanásvédelem a hidrogénipar számára A hidrogén az univerzumleggyakoribbeleme. Önmagában nem található meg a Földön, azonban oxigénnelkombinálvameglehetősengyakori, ez a H2 O , azaz a víz ...
Hibamentesdőlésszög-érzékeléstkeresdinamikusalkalmazásokhoz? Fedezze fel a Pepperl+FuchsIMUF99eszközét ... vagy hirtelen, rövidsokkhatás, például kátyúbahajtásesetén is. Rugalmasalkalmazkodás Az alkalmazáskövetelményeitőlfüggően a megfelelőmérésikimenetszabadonválasztható. A kimenetiértékekmegadhatóknyersadatként, például hőmérsékletként, gyorsulásként ...
A mobilberendezésekbenhasználtérzékelőknekmegbízhatóan kell működniüknehézkörülmények között; aszfalton és terepenegyaránt A Pepperl+Fuchsérzékelőmegoldásokszélesválasztékátkínálja a mobilmunkagépekhez ... 3PLd -nekmegfelelően. Legyen szómegbízhatóütközés-megelőzésről vagy egy területfigyeléséről, a USi-safetyrendszerideálismegoldás a biztonságikövetelményekkelellátott, kihívástjelentőkültérialkalmazásokesetén. A vezérlőinterfészről ...
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.