Nem rendelhető
Viator USB HART Interface with PowerXpress HM-MT-USB-PWRX-010031P
- Quickly power and communicate with HART field devices
- Powers all 2-wire HART devices, independent of supplier
- Draws power from USB port, needs no external supply to power modem
- Compact, rugged polycarbonate housing for industrial-grade reliability
- Integrated connector cable terminates in 2 test clips and 1 USB connector cable
- Selectable powered-modem or modem-only mode
- Compatible with 32- and 64-bit Windows® 7, 8, XP, 10, or Vista
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Adatlap kivonata: Műszaki adatok HM-MT-USB-PWRX-010031P
| Termék leírása |
|---|
| Interface for commissioning, calibrating, and acquiring data from HART field devices |
| Supply | ||
|---|---|---|
| Input current | 30 mA at 5 V for modem only , 255 mA at 5 V with device power and modem | |
| Power supply | Powered by USB port , No external power required | |
| Interface | ||
| Interface type | USB 2.0 port or higher | |
| Output | ||
| Signal | 0.5 ± 0.1 Vpp trapezoidal wave at 1200/2200 Hz, 24 VDC at 40 mA to device | |
| Galvanic isolation | ||
| Output/interface | 500 V DC | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012 | |
| System requirements | ||
| Operating system | Windows® 98 , 2000 , 32-bit XP , 32-bit Vista , 32- and 64-bit Windows® 7, and Windows® 10 | |
| Ambient conditions | ||
| Operating temperature | -20 ... 50 °C (-4 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 0 ... 95 % non-condensing | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | USB (type A) Connector , red and black test clips | |
| Material | Polycarbonate | |
| Dimensions | 96 mm x 47 mm x 24 mm | |
| Height | 24 mm | |
| Width | 47 mm | |
| Length | 96 mm | |
| Cable length | 1.8 m 2-strand wire terminating in 2 test clips , 15.2 cm cable terminating in 1 USB type A connector | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27219090 |
| ECLASS 12.0 | 27219090 |
| ECLASS 11.0 | 27219290 |
| ECLASS 10.0.1 | 27219290 |
| ECLASS 9.0 | 27219290 |
| ECLASS 8.0 | 27219290 |
| ECLASS 5.1 | 27242391 |
| ETIM 9.0 | EC001604 |
| ETIM 8.0 | EC001604 |
| ETIM 7.0 | EC001604 |
| ETIM 6.0 | EC003015 |
| ETIM 5.0 | EC001467 |
| UNSPSC 12.1 | 39121008 |
Details: HM-MT-USB-PWRX-010031P
Function
The Viator+® USB HART Interface with PowerXpress™ and a standard PC are all you need to commission, calibrate, and acquire data from any HART device. The interface supplies up to 40 mA of current to power the device. Power is drawn via the USB port, greatly simplifying field and bench commissioning of HART devices.
Product Documentation: HM-MT-USB-PWRX-010031P
| Manuals | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|
| Manual | ENG | 3718 KB |
Approvals: HM-MT-USB-PWRX-010031P
| Declaration of Conformity | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B0B9A | ALL | 85 KB |
Software: HM-MT-USB-PWRX-010031P
| Software Tools | Megjelenési információ | Fájltípus | Fájlméret |
|---|---|---|---|
| Software tool_a / Software Tool_a | ZIP | 11991 KB | |
| Software tool_a / Software Tool_a | ZIP | 11982 KB |
Kapcsolódó termékek: HM-MT-USB-PWRX-010031P
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
+36 88 545 902
A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.