Diagnostic unit for loop detector LC20-DT

Compact, easy-to-operate Bluetooth device
Generation of a full installation report in case of site sign-off
Performance checks on loop and installation
Compatible with all LC20 loop detectors
Operating range of up to 17 m
Diagnostics via app with integrated diagnostic tools

Technical Data
Details
Product Documentation
Design / Simulation
Approvals
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:

Adatlap kivonata: Műszaki adatok LC20-DT

Termék leírása
Bluetooth diagnostic unit for installation and diagnostics of LC20 detection loops

General specifications
Function principle		Inductive loop
Marking		CE
Operating frequency		2.4 GHz (ISM band)
Indicators/operating means
Function indicator		1 x two-colored LED (red and green) , red flashing: ready for connecting via Bluetooth , green flashing: connected via Bluetooth
Electrical specifications
Operating duration		Battery life (standby): ≥ 1250 days Battery life (continuous operation): ≥ 17 hours
Power supply		battery operated 1 x 3 V , 240 mAh coin cell battery (CR2032)
Interface
Interface type		Bluetooth dongle
Physical		Bluetooth v4.0 Detection range ≤ 17 m
Directive conformity
Radio and telecommunication terminal equipment		2014/53/EU
System requirements
Operating system		iOs v8.0 or higher , Android v4.4 or higher
Ambient conditions
Ambient temperature		-5 ... 80 °C (23 ... 176 °F)
Storage temperature		-20 ... 80 °C (-4 ... 176 °F)
Mechanical specifications
Mass		30 g including CR2032 coin cell battery
Dimensions
	Height	54 mm
	Width	38 mm
	Depth	23 mm

Classifications

System	Classcode
ECLASS 13.0	27280490
ECLASS 12.0	27280490
ECLASS 11.0	27280490
ECLASS 10.0.1	27280490
ECLASS 9.0	27280490
ECLASS 8.0	27280490
ECLASS 5.1	27281001
ETIM 9.0	EC002887
ETIM 8.0	EC002714
ETIM 7.0	EC002714
ETIM 6.0	EC002714
ETIM 5.0	EC001442
UNSPSC 12.1	46161510

Details: LC20-DT

Function

The easy-to-operate, low-energy Bluetooth diagnostic unit is compatible with LC20 loop detectors. It provides installation/service personnel with feedback on the detector loop installation and the detector configuration setup. This information is used to verify that a loop detector installation is working correctly. Loop detector setup and loop fault analysis with a mobile device avoids access issues and poor visibility of fault-condition displays.

The diagnostic unit attaches to the front of any LC20 loop detector and acquires data from the detector via an optic link. The correpsonding diagnostics app supplied free for iOS- or Android-based mobile devices is used to communicate with the LC20 and display the acquired data. Convenient recording and display of settings and measurement data improves fault diagnosis and avoids erroneous data records.

Product Documentation: LC20-DT

Manuals	Nyelv	Fájltípus	Fájlméret
Manual	ENG	PDF	2950 KB

Design / Simulation: LC20-DT

CAD	Nyelv	Fájltípus	Fájlméret
CAD 3-D / CAD 3-D	ALL	STP	1334 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: LC20-DT

Declaration of Conformity	Tanúsítvány sz.	Nyelv	Fájltípus	Fájlméret
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-4403	ALL	PDF	227 KB

Kapcsolódó termékek: LC20-DT

Matching System Components

	LC20-1-DR 12-24VAC/DC Loop detector
	Sensor system for vehicle detection, Complete control interface for inductive loops laid beneath the surface, Reliable detection with long service life, Various operating modes available, Boost function for increasing sensitivity, Operating voltage: 12 ... 24 V AC/DC ± 15%, Output type: relay, Signal output: Two output relays Relay 1: presence output Relay 2: pulse output, Connection: 2 x 6 plug-in screw terminals ≤1.5 mm²fa

	LC20-1-DR 230VAC Loop detector
	Sensor system for vehicle detection, Complete control interface for inductive loops laid beneath the surface, Reliable detection with long service life, Various operating modes available, Boost function for increasing sensitivity, Operating voltage: 230 V AC ±15 %, Output type: relay, Signal output: Two output relays Relay 1: presence output Relay 2: pulse output, Connection: 2 x 6 plug-in screw terminals ≤1.5 mm²fa

	LC20-1-RB 12-24VAC/DC Loop detector
	Sensor system for vehicle detection, Complete control interface for inductive loops laid beneath the surface, Reliable detection with long service life, Various operating modes available, Boost function for increasing sensitivity, Operating voltage: 12 ... 24 V AC/DC ± 15%, Output type: relay, Signal output: Two output relays Relay 1: presence output Relay 2: pulse output, Connection: 11-pin plug-in basefa

	LC20-1-RB 230VAC Loop detector
	Sensor system for vehicle detection, Complete control interface for inductive loops laid beneath the surface, Reliable detection with long service life, Various operating modes available, Boost function for increasing sensitivity, Operating voltage: 230 V AC ±15 %, Output type: relay, Signal output: Two output relays Relay 1: presence output Relay 2: pulse output, Connection: 11-pin plug-in basefa

	LC20-2-DR 230VAC Loop detector
	Sensor system for vehicle detection, Complete control interface for inductive loops laid beneath the surface, Reliable detection with long service life, Boost function for increasing sensitivity, Test function, Operating voltage: 230 V AC ±15 %, Signal output: One configurable relay output per channel #224258 #224258, Connection: 2 x 6 plug-in screw terminals ≤1.5 mm²fa

	LC20-2-DR 12-24VAC/DC Loop detector
	Sensor system for vehicle detection, Complete control interface for inductive loops laid beneath the surface, Reliable detection with long service life, Boost function for increasing sensitivity, Test function, Operating voltage: 12 ... 24 V AC/DC ± 15%, Signal output: One configurable relay output per channel #224258 #224258, Connection: 2 x 6 plug-in screw terminals ≤1.5 mm²fa

	LC20-2-RB 12-24VAC/DC Loop detector
	Sensor system for vehicle detection, Complete control interface for inductive loops laid beneath the surface, Reliable detection with long service life, Boost function for increasing sensitivity, Test function, Operating voltage: 12 ... 24 V AC/DC ± 15%, Signal output: One configurable relay output per channel #224258 #224258, Connection: 11-pin plug-in basefa

	LC20-2-RB 230VAC Loop detector
	Sensor system for vehicle detection, Complete control interface for inductive loops laid beneath the surface, Reliable detection with long service life, Boost function for increasing sensitivity, Test function, Operating voltage: 230 V AC ±15 %, Signal output: One configurable relay output per channel #224258 #224258, Connection: 11-pin plug-in basefa

General Notes Relating to Pepperl+Fuchs Product Information

Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
phone +36 88 545 902

A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.