Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Incremental rotary encoder RVS70E

RVS70E
  • 1024 or 2048 signal periods
  • Flameproof enclosure
  • Worldwide certification: ATEX, IECEx, KOSHA, NEPSI
  • Degree of protection IP66 / IP67
  • High shaft load capacity
  • Temperature range -40 ... 158 °F (-40°C to 70°C)
  • Siutable for offshore applications

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  RVS70E

General specifications
Detection typephotoelectric sampling
Device typeIncremental rotary encoder
Pulse count1024 and 2048
Functional safety related parameters
MTTFd140 a
Mission Time (TM)20 a
L101.6 E+9 at 3000 rpm
Diagnostic Coverage (DC)0 %
Electrical specifications
Operating voltage5 V ± 5 %
No-load supply currentmax. 70 mA
Output
Output typesine / cosine
Amplitude1 Vss ± 10 %
Load currentmax. per channel 20 mA , short-circuit protected , Reverse polarity protection
Output frequencymax. 200 kHz (3 dB limit)
Connection
Cable&Empty; 10.2 mm, Radox 9 x 0.5 mm2
Standard conformity
Degree of protectionDIN EN 60529, IP66 DIN EN 60529, IP67
Climatic testingDIN EN 60068-2-78 , no moisture condensation
Emitted interferenceEN 61000-6-4:2007/A1:2011
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 100 g, 3 ms
Vibration resistanceDIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Ambient conditions
Operating temperature
Gas Ex-area-40 ... 70 °C (-40 ... 158 °F)
Dust Ex-area-40 ... 70 °C (-40 ... 158 °F)
Storage temperature
Gas Ex-area-40 ... 70 °C (-40 ... 158 °F)
Dust Ex-area-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
Combination 1housing: anodized aluminum
flange: anodized aluminum
shaft: Stainless steel 1.4401 / AISI 316
Combination 2 (Inox)housing: stainless steel 1.4404 / AISI 316L
flange: stainless steel 1.4404 / AISI 316L
shaft: Stainless steel 1.4401 / AISI 316
Massapprox. 1300 g (combination 1)
approx. 2300 g (combination 2)
Rotational speedmax. 6000 min -1
Moment of inertia400 gcm2
Starting torque< 5 Ncm
Shaft load
Axial110 N
Radial150 N
Data for application in connection with hazardous areas
EU-type examination certificateZELM 14 ATEX 0519 X
IECEx ZLM 14.0003X
MarkingEx-Hexagon II 2G Ex db IIC T6 - T4 Gb
Ex-Hexagon II 2D Ex tb IIIC T80°C Db
Directive conformity
Directive 2014/34/EUIEC 60079-0:2011 , EN 60079-0:2012+A11:2013 , IEC 60079-1:2014 , EN 60079-1:2014 , IEC 60079-31:2013 , EN 60079-31:2014

Documents: RVS70E

Instruction manualsNyelvFájltípusFájlméret
Instruction manualENGPDF879 KB
BetriebsanleitungGERPDF883 KB

Approvals+Certificates: RVS70E

Statements of complianceTanúsítvány sz.FájltípusFájlméret
EU-Declaration of Conformity / EU-KonformitätserkärungDOC-0747DPDF1666 KB
Certificates
China NEPSIGYJ19.1361XPDF1251 KB
EU ZELM ATEX Category (2) G DZELM 14 ATEX 0519XPDF1566 KB
Korea KOSHA2019-AV4BO-0390, 2019-AV4BO-0391PDF618 KB
Worldwide ZELM IECEx Certificate of ConformityIECEX ZLM 14.0003XLINK---

Kapcsolódó termékek: RVS70E

Accessories
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa
Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa
Precision coupling, Precision couplingfa
Stainless steel bellows coupling, Backlash-free, angle synchronous rotation transmission, Optimall misalignment compensation, Very high torsion spring stiffness, Small reset forces, Vibration- isolatingfa
Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa
Measuring wheel for shaft diameter 10 mm, Plastic coating, 500 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Pimpled rubber coating, 500 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Knurled aluminum, 500 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Plastic coating, 200 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Pimpled rubber coating, 200 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Knurled aluminum, 200 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Knurled plastic, 500 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Knurled plastic, 200 mm circumferencefa