Serviceline
Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Type Y, Z & Ex [pz] purge and pressurization system 3003

3003
  • NFPA 496, ISA 12.4, and ATEX standards
  • Optional alarm output indicates air lock failure
  • Optional differential pressure switch for Class I, Group A-D, ATEX certified hazardous area locations
  • Type Ex [pz] certification for Zone 2 hazardous locations
  • Type Y system certified for Class I, Division 1 to Division 2
  • Type Z system certified for Class I, Division 2 to nonhazardous area
  • Enclosure volume up to 2.54 m3 (90 ft3)

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok 3003

Termék leírása
3003 Series purge and pressurization system
General specifications
Hazardous environmentgas
Electrical specifications
ConnectionTerminal blocks
Output
Output I-WPS-
Output typeSwitch contacts
Contact loading120 VAC @ 15 A
Output II-WPSA-
Output typeSwitch contacts
Contact loading120/220 VAC; 24 VDC @ 10 A; 125 VDC @ 50 mA
power requirements: 24 / 120 / 240 VDC @ 3 / 4 / 11 watts
Pneumatic parameters
Protective gas supplyinstrument grade air or inert gas
Pressure requirement80 - 120 psi (5.5 - 8.3 bar)
Safe pressureSetpoint: 0.25" (6.35 mm)
Flow rate: 0.1 - 3.5 SCFH (2.8 - 99 l /hr)
Purge flow and enclosure pressure rate12 SCFM /720 SCFH (340 l /m / 20390 l /hr)
(With regulator set to 60 psi min. during exchange)
Ambient conditions
Ambient temperature-29 ... 49 °C (-20.2 ... 120.2 °F)
Mechanical specifications
Connection typeSystem supply port: 1/4" FPT
Enclosure supply port: 1/2" FPT
Enclosure reference fitting: 1/4" tube
Switch conduit port size: 1/2" FPT
MaterialRegulator body: zinc w/enamel finish
Regulator handle & bowl: polycarbonate
Enclosure pressure gauge: alum. w/enamel finish
Rapid Exchange® gauge: poly & nickel plated
Tube fitting: 316 SS forged body
Tubing: 316 SS 1/4" .035 welded
Fastener hardware: alum. & stainless steel
System face plate: 316 14 ga #3 brush SS
System mounting flange: 316 SS tumble finish
Manifold body: anodized aluminum
Manifold valves: 316 SS
Mfr. ID nameplate: silkscreen Lexan®
Mass3003-LPS-* 4.5 kg (10 lb)
3003-WPS* 6.8 kg (15 lb)
Data for application in connection with hazardous areas
EU-Type Examination Certificate
MarkingLPS:
Ex-Hexagon II 3G Ex
[pz] IIC T4

WPSA:
Ex-Hexagon II 3G Ex
[pz] IIB+H2 T4
Directive conformity
Directive 94/9/EC*-LPS-* :
EN 60079-2: 2004
EN 60079-0: 2006
International approvals
FM approvalType Y
LPS: Class I, Division 1, Groups A, B, C, D
WPS: Class 1, Division 1, Groups C, D
WPSA: Class I, Division 1, Groups A, B, C, D

Type Z and Ex [pz]
LPS: Class I, Division 2, Groups A, B, C, D
WPS: Class 1, Division 2, Groups C, D
WPSA: Class I, Division 2, Groups A, B, C, D
UL approval
cULusType Y
LPS: Class I, Division 1, Groups A, B, C, D
WPS: Class 1, Division 1, Groups C, D
WPSA: Class I, Division 1, Groups A, B, C, D

Type Z and Ex [pz]
LPS: Class I, Division 2, Groups A, B, C, D
WPS: Class 1, Division 2, Groups C, D
WPSA: Class I, Division 2, Groups A, B, C, D

Approvals+Certificates: 3003

CertificatesTanúsítvány sz.FájltípusFájlméret
CA ULE184741 (RFPW7)LINK---
Canada ULRFPW7.E184741LINK---
USA Certificate ULRFPW.E184741LINK---
USA FMCoC 3018335PDF433 KB
USA ULE184741 (RFPW)LINK---

Bebco EPS® Öblítő- és nyomásfokozó technológia

Ismerje meg, hogyan biztosíthatja a legokosabb módon a robbanásveszélyes helyek védelmét, és konfigurálhatja saját öblítő- és nyomásfokozó rendszerét!