Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
A teljes adatlap letöltése PDF formátumban:
Termék leírása |
---|
Portable Fieldbus Battery |
Supply | ||
---|---|---|
Battery charger | 110 ... 240 V AC , 50/60 Hz | |
Charging voltage | 24 V DC | |
Connections | ||
Battery charger | DC Round socket | |
Fieldbus connection | ||
Connection | banana socket 4 mm | |
Rated voltage | 15 ... 30 V DC , adjustable | |
Rated current | 1 A | |
Host-side | banana socket 4 mm | |
Terminating resistor | 2x 100 Ω on/off switchable via rotary switch | |
Diagnostic link | banana socket 4 mm | |
Indicators/operating means | ||
LED POWER | green: Power on | |
LED Low Battery | red: low charge condition | |
LED Overload | red: overload, load current > 1.15 A typ. | |
LED display | output current | |
Directive conformity | ||
Electromagnetic compatibility | ||
Directive 2014/30/EU | EN 61326-1:2013 | |
Standard conformity | ||
Fieldbus standard | IEC 61158-2, ISA S 50.02 part 2 | |
Accumulator | ||
Capacitance | 7200 mAh | |
Charging time | 8 ... 16 h | |
Ambient conditions | ||
Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
Storage temperature | -15 ... 50 °C (5 ... 122 °F) | |
Relative humidity | < 95 % non-condensing | |
Mechanical specifications | ||
Housing material | fiberglass reinforced polyester | |
Degree of protection | IP54 | |
Mass | approx. 7 kg | |
Dimensions | ||
Height | 259 mm | |
Width | 192 mm | |
Depth | 192 mm | |
Certificates and approvals | ||
FOUNDATION Fieldbus | Integrated Power Conditioner with FF831 approval |
System | Classcode |
---|---|
ECLASS 13.0 | 27242692 |
ECLASS 12.0 | 19170104 |
ECLASS 11.0 | 27242692 |
ECLASS 10.0.1 | 27242692 |
ECLASS 9.0 | 27242692 |
ECLASS 8.0 | 27242692 |
ECLASS 5.1 | 27242692 |
ETIM 9.0 | EC002584 |
ETIM 8.0 | EC002584 |
ETIM 7.0 | EC002584 |
ETIM 6.0 | EC002584 |
ETIM 5.0 | EC001604 |
UNSPSC 12.1 | 39121008 |
Validation of device communication and fieldbus installation testing can be done even when the line voltage or DCS system is not available. This allows onsite personnel to verify the quality of the installation at early stages.
The fieldbus battery features a rugged housing for indoor/outdoor use during commissioning of fieldbus segments. The battery includes a fieldbus power conditioner. Its output voltage is adjustable to match the value of the later used fieldbus power supply. A battery charger is included.
The fieldbus battery complements the FieldConnex Mobile Advanced Diagnostic Module or any other equipment available for testing any fieldbus installation.
Literature | Nyelv | Fájltípus | Fájlméret |
---|---|---|---|
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron | ENG | 361 KB | |
Application Report - Digital Communication in Steel-Plate Manufacturing | ENG | 470 KB |
Declaration of Conformity | Tanúsítvány sz. | Nyelv | Fájltípus | Fájlméret |
---|---|---|---|---|
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0330B | ALL | 87 KB |
RSS információs szolgáltatás a PANOS frissítésekkel kapcsolatban
Bármikor tájékozódhat, ha az Ethernet-APL switch-ekoperációs rendszerének, a PANOS-nak új szoftverfrissítése jelenik meg: Az RSS-hírcsatornával azonnal kap egy e-mailes értesítést a postaládájába, miután egy frissítés megjelent.