Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472
Nem rendelhető
Nem rendelhető

Fieldbus Terminator for Field Mounting (Ex ia) F*-FT-Ex1.I.IEC

F*-FT-Ex1.I.IEC
  • Terminator in stainless steel housing
  • Intrinsically safe, FISCO
  • Installation on open cable gland
  • Choice of threads 20 mm, Pg 13.5 mm or 1/2" NPT
  • For FOUNDATION Fieldbus H1 and PROFIBUS PA

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  F*-FT-Ex1.I.IEC

General specifications
Design / MountingOutside installation
Fieldbus connection
Connection2-wire cable, red+, black-
Rated voltagemax. 32 V DC
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Standard conformity
Electromagnetic compatibilityNE 21:2006
Degree of protectionIEC/EN 60529
Fieldbus standardIEC 61158-2
Ambient conditions
Ambient temperature-50 ... 85 °C (-58 ... 185 °F)
Storage temperature-50 ... 85 °C (-58 ... 185 °F)
Mechanical specifications
Core cross section0.75 mm2
Housing77 mm x 22 mm
Degree of protectionIP67
Mass100 g
Mounting20 mm ISO thread
PG13.5 thread
1/2 NPT thread
Data for application in connection with hazardous areas
EU-type examination certificateDMT 01 ATEX 104 X
MarkingEx-Hexagon II 1G EEx ia IIC T6
Temperature classT6 for ambient temperature ≤ 60 °C
T5 for ambient temperature ≤ 75 °C
T4 for ambient temperature ≤ 85 °C
Maximum valuesacc. to FISCO
Directive conformity
Directive 94/9/ECEN 60079-0:2006 , EN 60079-11:2007 , EN 60079-26:2007 , IEC 60079-27:2008
International approvals
IECEx approvalIECEx BVS 10.0022X
Approved forEx ia IIC T6 Ga
General information
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027242692
ECLASS 12.019170104
ECLASS 11.027242692
ECLASS 10.0.127242692
ECLASS 9.027242692
ECLASS 8.027242692
ECLASS 5.127242692
ETIM 9.0EC002584
ETIM 8.0EC002584
ETIM 7.0EC002584
ETIM 6.0EC002584
ETIM 5.0EC001604
UNSPSC 12.139121008

Details: F*-FT-Ex1.I.IEC

Function

F*-FT-Ex1.I.IEC are terminators and provide capacitance and resistance to terminate a segment according to IEC/EN 61158-2. Explosion protection is intrinsic safety 'Ex ia' for installation in Zone 0 ... 2. A solid metal housing enables installation in rough environments. Housings are selectable with 20 mm ISO, 13.5 mm PG, or 0.5 in NPT threads for easy installation on outdoor fieldbus junction boxes or field devices.

For increased availability, the terminator features multiple capacitors and resistors in a network. If one capacitor fails, the basic functionality remains intact. This is detectable with the FieldConnex ® advanced diagnostic module, allowing timely maintenance.

Terminators are required at each end of the trunk line. They eliminate signal reflections at the end of the cable and convert the fieldbus signal transmitted as a current into a voltage, which is detectable by all devices.

Informative Literature: F*-FT-Ex1.I.IEC

Nyelvválasztás:
LiteratureNyelvFájltípusFájlméret
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-SynchrotronENGPDF361 KB
Application Report - Digital Communication in Steel-Plate ManufacturingENGPDF470 KB

Product Documentation: F*-FT-Ex1.I.IEC

Nyelvválasztás:
Safety and Security DocumentationNyelvFájltípusFájlméret
Instruction Manual F*-FT -Ex1.I.IEC, F*-FT-Ex1.D.IECENGPDF1794 KB

Approvals: F*-FT-Ex1.I.IEC

Nyelvválasztás:
CertificatesTanúsítvány sz.NyelvFájltípusFájlméret
BVS IECEx Certificate of ConformityIECEx BVS 10.0022XALLLINK---
Canada, USA CSACoC 1284467ALLPDF73 KB
Control Drawings
Control drawing CSA / Control drawing CSA   ALLPDF104 KB

Kapcsolódó termékek: F*-FT-Ex1.I.IEC

Accessory of
Output: 12.6 ... 13.4 V/100 mA, Couples PROFIBUS PA devices transparently to PROFIBUS DP, Intrinsically safe, Ex ia (FISCO or Entity), Installation in Zone 2/Class I, Div. 2, Fixed, high-availability terminator, IECEx approval, Dust protection, Europe, USA, Canada, Device coupler location: Zone 2 - high-power trunk
Zone 1 - intrinsically safe trunk, Device coupler location [2]: Zone 1 - intrinsically safe trunkpa

Az Ethernet-APL lehetővé teszi a folyamatos adatátvitelt a hierarchia összes szintjén. Részletesen az úttörő technológiáról…

RSS információs szolgáltatás a PANOS frissítésekkel kapcsolatban

Bármikor tájékozódhat, ha az Ethernet-APL switch-ekoperációs rendszerének, a PANOS-nak új szoftverfrissítése jelenik meg: Az RSS-hírcsatornával azonnal kap egy e-mailes értesítést a postaládájába, miután egy frissítés megjelent.

A döntéshozataltól a tervezésig, a telepítésig, az üzembe helyezésig, valamint a működtetésig és karbantartásig: Fedezze fel, hogyan hozhatja ki a legtöbbet a terepi busz infrastruktúrából ...