Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Barcode scanner VB14N-400-T

VB14N-400-T
  • Line scanner
  • Version for low temperature applications
  • Simple operation via function keys: test mode, code teaching and code optimization
  • Code reconstructor
  • Connect up to 32 scanners
  • Sturdy aluminum housing
  • Two serial interfaces RS 232 / RS 485
  • Engine control (On/Off) possible
  • Degree of protection IP65

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  VB14N-400-T

Termék leírása
Barcode scanner
General specifications
Light sourcelaser diode
Light typemodulated visible red light
Laser nominal ratings
NoteLASER LIGHT , DO NOT STARE INTO BEAM
Laser class2
Wave length650 nm
Beam divergence< 1.5 mrad
Pulse length1.3 ms
Repetition rate200 Hz
max. pulse energy1.19 µJ
Scan rate600 ... 1000 s-1
Read distance60 ... 400 mm
Opening angle50 °
Optical facefront or on side (with deviation mirror)
Resolution0.2 mm ( 8 mils )
Indicators/operating means
Operation indicatorLED blue: Power on, LED green: Ready to read (READY), LED green: Read successfully (GOOD), LED yellow: External trigger signal pending (TRIGGER), LED yellow: Communication active (COM), LED red: "no read" (STATUS)
Electrical specifications
Operating voltage10 ... 30 V DC
Power consumptionmax. 3 W
Interface
Interface typeserial , RS-232 and RS-485 up to 115.2 kBit/s
ID-NET™ up to 1 Mbit/s
Input 1
Input typeExternal triggering
Output
Signal output2, programmable, optocoupled
Switching voltagemax. 40 V DC
Switching currentmax. 40 mA
Voltage drop1 V at load current ≤ 10 mA
Compliance with standards and directives
Directive conformityEMC Directive 2004/108/EC
Standard conformity
Noise immunityEN 61000-6-2:2005
Emitted interferenceEN 55022
Degree of protectionEN 60529
Laser classIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Ambient conditions
Ambient temperature-35 ... 45 °C (-31 ... 113 °F)
Storage temperature-35 ... 70 °C (-31 ... 158 °F)
Relative humidity90 % , noncondensing
Shock resistanceIEC 68-2-27 Test EA 30G; 11 ms; 3 impacts on each axis
Vibration resistanceIEC 68-2-6 Test FC 1.5 mm ; 10 ... 55 Hz ; 2 hours on each axis
Mechanical specifications
Degree of protectionIP65
Connection1 m cable with 25-pin Sub-D connector
Material
HousingAluminum
Mass330 g
Dimensions
Height34 mm
Width68 mm
Depth84 mm

Classifications

SystemClasscode
ECLASS 13.027280102
ECLASS 12.027280102
ECLASS 11.027280102
ECLASS 10.0.127280102
ECLASS 9.027280102
ECLASS 8.027280102
ECLASS 5.127280102
ETIM 9.0EC002999
ETIM 8.0EC002999
ETIM 7.0EC002999
ETIM 6.0EC002999
ETIM 5.0EC002999
UNSPSC 12.143211701

Details: VB14N-400-T

Function

The VB14N-***-T-R is a grid scanner for reading 1D barcodes and is specially designed for use at low temperatures. With its high-performance optics and code reconstruction, the barcode scanner offers a high level of reliability when reading 1D barcodes that are difficult to detect. A function key and several LEDs on the barcode scanner provide support when parameterizing, teaching in barcodes, and testing. In live operation, the LEDs provide information about the relevant read status.

You can establish a high-speed connection between up to 32 devices. This connection enables data to be recorded in a quicker and more efficient manner, without the need for an additional external multiplexer.

The corresponding PC software makes parameterization simple.

Informative Literature: VB14N-400-T

Nyelvválasztás:
LiteratureNyelvFájltípusFájlméret
Application Report - A scanner for any situation - VB14NENGPDF165 KB
Application Report - Automatic Coordination in WarehousesENGPDF414 KB

Product Documentation: VB14N-400-T

Nyelvválasztás:
ManualsNyelvFájltípusFájlméret
Manual Barcode scanner VB14NENGPDF2806 KB

Design / Simulation: VB14N-400-T

Nyelvválasztás:
CADNyelvFájltípusFájlméret
CAD 3-D / CAD 3-DALLSTP230 KB
CAD Portal / CAD PortalALLLINK---

Approvals: VB14N-400-T

Nyelvválasztás:
Declaration of ConformityTanúsítvány sz.NyelvFájltípusFájlméret
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3633AALLPDF213 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6630ALLPDF36 KB

Software: VB14N-400-T

Nyelvválasztás:
Software ToolsMegjelenési információFájltípusFájlméret
Genius Software / Genius SoftwareV. 1.16ZIP95060 KB

Kapcsolódó termékek: VB14N-400-T

Accessories

Connector box for barcode scanner, Connect up to 32 scanners to a network with ID-NetTM, Option of upgrading with memory module, Easy scanner connection by means of clamp terminals, Degree of protection IP65fa
Optikai azonosítás

A 2D kódolvasóktól a kézi készülékeken át a vonalkódolvasókig és a speciális megoldásokig – találja meg az ideális megoldást optikai azonosítási feladatához.