Fotoelektromos érzékelők

Nem rendelhető

Safety light grid SLC-2/133

ATEX-approval for zone 2 and zone 22
Beam spacing 500 mm
Self-monitoring (type 4 according to IEC/EN 61496-1)
Safety outputs OSSD, external status displays OSSD
Start/Restart disable
7-segment diagnostic display
Operating reserve indication
Degree of protection IP66

Technical Data
Product Documentation
Design / Simulation
Approvals
Software
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:

Adatlap kivonata: Műszaki adatok SLC-2/133

Termék leírása
Safety light grid with integrated control unit

System components
Emitter		SLC-2-T/133
Receiver		SLC-2-R/133
General specifications
Effective detection range		0.2 ... 20 m
Light source		IRED
Light type		modulated infrared light
LED risk group labelling		exempt group
Tests		IEC/EN 61496
Safety type according to IEC/EN 61496		4
Target size		50 mm
Beam spacing		500 mm
Number of beams		2
Operating mode		can be selected with or without start/restart disable
Opening angle		< 5 °
Functional safety related parameters
Safety Integrity Level (SIL)		SIL 3
Performance level (PL)		PL e
Category		Cat. 4
Mission Time (T_M)		20 a
PFH_d		7.27 E-9
Type		4
Indicators/operating means
Operation indicator		7-segment display in emitter
Diagnostics indicator		7-segment display in receiver
Function indicator		in receiver: LED red: OSSD off LED green: OSSD on LED yellow: Protected area free, system start-ready
Stability alarm indicator		LED orange
Control elements		switch for start/restart disable, transmission coding
Electrical specifications
Operating voltage		24 V DC (-30 %/+25 %)
No-load supply current		Emitter: 100 mA , receiver 150 mA
Protection class		III
Input
Activation current		approx. 10 mA
Activation time		0.03 ... 1 s
Test input		Reset-input for system test
Function input		Start release
Output
Safety output		2 separated fail safe semiconductor outputs
Signal output		1 PNP, max. 100 mA for start readiness , short-circuit protected 1 PNP, max. 100 mA for OSSD status , short-circuit protected
Switching voltage		Operating voltage -2 V
Switching current		max. 0.5 A
Response time		10 ms
Compliance with standards and directives
Directive conformity
	Machinery Directive 2006/42/EC	EN ISO 13849-1:2008 ; EN 61496-1:2013
	EMC Directive 2004/108/EC	EN 61000-6-4:2007+A1:2011
Standard conformity
	Standards	IEC 61496-2:2013
Approvals and certificates
CE conformity		CE
CCC approval		CCC approval / marking not required for products rated ≤36 V
TÜV approval		TÜV
Ambient conditions
Ambient temperature		0 ... 55 °C (32 ... 131 °F)
Storage temperature		-25 ... 70 °C (-13 ... 158 °F)
Relative humidity		max. 95 %, not condensing
Mechanical specifications
Degree of protection		IP66
Connection		M20 cable gland , Cable diameter ∅5.5 ... 13 mm , terminal compartment with screw terminals, lead cross-section max. 1.5 mm²
Material
	Housing	extruded aluminum profile, RAL 1021 (yellow) coated
	Optical face	Plastic pane
Mass		per 2100 g
Dimensions
	Width	52 mm
	Depth	55 mm
	Length	707 mm
Equipment protection level Gc (nA)
ATEX marking		II 3 G Ex nAc op is IIC T4
Directive conformity		94/9/EG
Standards		EN 60079-0:2009 , EN 60079-15:2010 , EN 60079-28:2007
Equipment protection level Dc
ATEX marking		II 3 D Ex tc IIIC T90 °C
Directive conformity		94/9/EG
Standards		EN 60079-31:2009
General information
Use in the hazardous area		see more details for the use in hazardous areas
	Category	3G; 3D

Classifications

System	Classcode
ECLASS 13.0	27272703
ECLASS 12.0	27272703
ECLASS 11.0	27272703
ECLASS 10.0.1	27272703
ECLASS 9.0	27272703
ECLASS 8.0	27272703
ECLASS 5.1	27272703
ETIM 9.0	EC002549
ETIM 8.0	EC002549
ETIM 7.0	EC002549
ETIM 6.0	EC002549
ETIM 5.0	EC002549
UNSPSC 12.1	46171620

Details: SLC-2/133

Product Documentation: SLC-2/133

Safety and Security Documentation	Nyelv	Fájltípus	Fájlméret
Safety Manual	ENG	PDF	2257 KB

Design / Simulation: SLC-2/133

CAD	Nyelv	Fájltípus	Fájlméret
3-D model emitter / 3-D-Modell Sender	ALL	STP	207 KB
3-D model receiver / 3-D-Modell Empfänger	ALL	STP	207 KB

Approvals: SLC-2/133

Certificates	Tanúsítvány sz.	Nyelv	Fájltípus	Fájlméret
/cert/cert1315d.pdf	Z10 020068 0081	ALL	PDF	127 KB
/cert/cert4284a.pdf	UL-CA-2128125-1 / UL-US-2133749-1	ALL	PDF	587 KB

Software: SLC-2/133

Software Tools	Megjelenési információ	Fájltípus	Fájlméret
SISTEMA Library Sensors / SISTEMA-Bibliothek Sensoren		ZIP	131 KB

Kapcsolódó termékek: SLC-2/133

Matching System Components

	SB4-OR-4XP Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

	SB4-OR-4XP-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-B-B-B-B-B-B Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Safety outputs OSSD, external status displays OSSD, Safety Integrity Level (SIL): SIL 3fa

	SB4-OR-4XP-4M Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Sequential and parallel muting in various operating modes, Double muting, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

	SB4-OR-4XP-4X Safety control unit
	Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 8 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Relay monitor, Stability alarm indication, Clearly visible LED functional display, Safety Integrity Level (SIL): SIL 3, Performance level (PL): PL efa

General Notes Relating to Pepperl+Fuchs Product Information

Funkcionális biztonság központ a Pepperl+Fuchs-nál

Látogassa meg a Funkcionális biztonság központot

Több száz SIL/PL értékeléssel ellátott termék, ingyenes eszközök és prospektusok egy helyen: a „Funkcionális biztonság központ” a legjobb kiindulópont biztonsági funkciók kivitelezéséhez.

Pepperl+Fuchs Kereskedelmi Kft.
8200 Veszprém
Kistó utca 16 - 18.
Magyarország
sales@hu.pepperl-fuchs.com
phone +36 88 545 902

A Pepperl+Fuchs az elektronikai érzékelők és alkatrészek vezető fejlesztő és gyártó vállalata a globális automatizálási piacon. A folyamatos innováció, a tartós minőség és az állandó növekedés már több mint 70 éve garantálja a sikert. A Pepperl+Fuchs 6300 embert alkalmaz világszerte, gyártóegységei vannak Németországban, az USA-ban, Szingapúrban, Magyarországon, Indonéziában és Vietnámban, legtöbbjük ISO 9001 tanusítvánnyal is rendelkezik.