Serviceline
Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Safety light curtain SLCT90

SLCT90
  • Resolution 90 mm
  • Protection field height up to 2400 mm
  • Self-testing (type 2 as per IEC/EN 61496-1)
  • SIL1 acc. to IEC 61508
  • Degree of protection IP67
  • Temperature range -35 ... 60°C (-31 ... 140 °F)
  • Slim design, mounting on three sides

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok SLCT90

Termék leírása
Safety light curtain
General specifications
Effective detection range0.2 ... 8 m
Light sourceIRED
Light typemodulated infrared light , 850 nm
Protection field heightsee Table 1, max. 2400 mm
Operating modeStartup/restart disable, deactivateable
Optical resolution90 mm
Angle of divergence5 °
Ambient light limitNot sensitive to ambient light in accordance with IEC 61496-2
UL File NumberE215245
Functional safety related parameters
Safety Integrity Level (SIL)SIL 1
Performance level (PL)PL c
CategoryCat. 2
Mission Time (TM)20 a
PFHdDepending on the protection field height; see Manual
Type2
Indicators/operating means
Operation indicatorgreen: Power on
Function indicatorGreen: OSSD ON , Red: OSSD OFF
Status indicatorTransmitter unit: LED yellow: Mode, test or error
Receiver: LED yellow: Start readiness, function reserve or error
Electrical specifications
Operating voltage24 V DC (-20%, +30%) ; Power supply with safe isolation: 24 V DC
No-load supply currentTransmitter unit:≤ 150 mA
Receiver: ≤ 150 mA (outputs open)
Protection classIII , IEC 61140
Power consumptionTransmitter unit: 5 W
Receiver: 15 W
Input 1
Input typeTransmitter unit test
Input formatBreak contact
Switching voltage24 V DC
Input current5 mA
Input 2
Input typeTransmitter unit, mode A/B
FunctionBeam Code A: open or 0 V
Beam Code B: 24 V DC, 5 mA
Input 3
Input typeReceiver unit relay monitor
Input formatBreak contact
Switching voltage24 V DC
Input current5 mA
Input 4
Input typeReceiver unit, start release
Input formatBreak contact
Input current5 mA
Input 5
Input typeReceiver unit, mode A/B (see transmitter unit, mode A/B)
Output
Response timesee Table 1, max. 17 ms
Output 1
Output typeReceiver unit OSSD
Signal outputPNP semiconductor , monitored for short and cross circuits
Switching voltageON: UB - 2 V; OFF: < 1 V
Switching currentON: max. 0.1 A; OFF: < 5 µA
Output 2
Output typeReceiver signal output start readiness
Signal outputPNP-semiconductor, short-circuit protected, 0.1A
Conformity
Functional safetyISO 13849-1 ; EN 61508 part1-4
Product standardEN 61496-1 ; IEC 61496-2
Approvals and certificates
CE conformityCE
UL approvalcULus Listed
CCC approvalCCC approval / marking not required for products rated ≤36 V
TÜV approvalTÜV
Ambient conditions
Ambient temperature-35 ... 60 °C (-31 ... 140 °F)
Storage temperature-35 ... 70 °C (-31 ... 158 °F)
Relative humiditymax. 95 %, not condensing
Mechanical specifications
Housing length Lsee table 2
Degree of protectionIP67 , For indoor use only
ConnectionTransmitter unit: 4-pin, M12 x 1 connector
Receiver: 8-pin, M12 x 1 connector
Cable cross section min. 0.25 mm2
Max. cable length 50 m
Material
Housingextruded aluminum section , Silver anodized
Optical facePlastic pane , Transparent polycarbonate
Masssee table 2
General information
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Documents: SLCT90

Instruction manualsNyelvFájltípusFájlméret
Manual SLCT*, SLCT*/35ENGPDF3446 KB
Handbuch SLCT*, SLCT*/35GERPDF2558 KB

CAD+CAE: SLCT90

CADFájltípusFájlméret
3-D model, 100 mm in IGS format / 3-D-Modell, 100 mm im IGS-FormatIGS1988 KB
3-D model, 100 mm in STP format / 3-D-Modell, 100 mm im STP-FormatSTP1586 KB
3-D model, 1000 mm in IGS format / 3-D-Modell, 1000 mm im IGS-FormatIGS1989 KB
3-D model, 1000 mm in STP format / 3-D-Modell, 1000 mm im STP-FormatSTP1586 KB
3-D model, 1100 mm in IGS format / 3-D-Modell, 1100 mm im IGS-FormatIGS1989 KB
3-D model, 1100 mm in STP format / 3-D-Modell, 1100 mm im STP-FormatSTP1586 KB
3-D model, 1200 mm in IGS format / 3-D-Modell, 1200 mm im IGS-FormatIGS1989 KB
3-D model, 1200 mm in STP format / 3-D-Modell, 1200 mm im STP-FormatSTP1586 KB
3-D model, 1300 mm in IGS format / 3-D-Modell, 1300 mm im IGS-FormatIGS1989 KB
3-D model, 1300 mm in STP format / 3-D-Modell, 1300 mm im STP-FormatSTP1586 KB
3-D model, 1400 mm in IGS format / 3-D-Modell, 1400 mm im IGS-FormatIGS1989 KB
3-D model, 1400 mm in STP format / 3-D-Modell, 1400 mm im STP-FormatSTP1586 KB
3-D model, 1500 mm in IGS format / 3-D-Modell, 1500 mm im IGS-FormatIGS1989 KB
3-D model, 1500 mm in STP format / 3-D-Modell, 1500 mm im STP-FormatSTP1586 KB
3-D model, 1600 mm in IGS format / 3-D-Modell, 1600 mm im IGS-FormatIGS1989 KB
3-D model, 1600 mm in STP format / 3-D-Modell, 1600 mm im STP-FormatSTP1586 KB
3-D model, 1700 mm in IGS format / 3-D-Modell, 1700 mm im IGS-FormatIGS1989 KB
3-D model, 1700 mm in STP format / 3-D-Modell, 1700 mm im STP-FormatSTP1586 KB
3-D model, 1800 mm in IGS format / 3-D-Modell, 1800 mm im IGS-FormatIGS1989 KB
3-D model, 1800 mm in STP format / 3-D-Modell, 1800 mm im STP-FormatSTP1586 KB
3-D model, 1900 mm in IGS format / 3-D-Modell, 1900 mm im IGS-FormatIGS1989 KB
3-D model, 1900 mm in STP format / 3-D-Modell, 1900 mm im STP-FormatSTP1586 KB
3-D model, 200 mm in IGS format / 3-D-Modell, 200 mm im IGS-FormatIGS1988 KB
3-D model, 200 mm in STP format / 3-D-Modell, 200 mm im STP-FormatSTP1586 KB
3-D model, 2000 mm in IGS format / 3-D-Modell, 2000 mm im IGS-FormatIGS1989 KB
3-D model, 2000 mm in STP format / 3-D-Modell, 2000 mm im STP-FormatSTP1586 KB
3-D model, 2100 mm in IGS format / 3-D-Modell, 2100 mm im IGS-FormatIGS1989 KB
3-D model, 2100 mm in STP format / 3-D-Modell, 2100 mm im STP-FormatSTP1586 KB
3-D model, 2200 mm in IGS format / 3-D-Modell, 2200 mm im IGS-FormatIGS1989 KB
3-D model, 2200 mm in STP format / 3-D-Modell, 2200 mm im STP-FormatSTP1586 KB
3-D model, 2300 mm in IGS format / 3-D-Modell, 2300 mm im IGS-FormatIGS1989 KB
3-D model, 2300 mm in STP format / 3-D-Modell, 2300 mm im STP-FormatSTP1586 KB
3-D model, 2400 mm in IGS format / 3-D-Modell, 2400 mm im IGS-FormatIGS1989 KB
3-D model, 2400 mm in STP format / 3-D-Modell, 2400 mm im STP-FormatSTP1586 KB
3-D model, 300 mm in IGS format / 3-D-Modell, 300 mm im IGS-FormatIGS1988 KB
3-D model, 300 mm in STP format / 3-D-Modell, 300 mm im STP-FormatSTP1586 KB
3-D model, 400 mm in IGS format / 3-D-Modell, 400 mm im IGS-FormatIGS1988 KB
3-D model, 400 mm in STP format / 3-D-Modell, 400 mm im STP-FormatSTP1586 KB
3-D model, 500 mm in IGS format / 3-D-Modell, 500 mm im IGS-FormatIGS1988 KB
3-D model, 500 mm in STP format / 3-D-Modell, 500 mm im STP-FormatSTP1586 KB
3-D model, 600 mm in IGS format / 3-D-Modell, 600 mm im IGS-FormatIGS1988 KB
3-D model, 600 mm in STP format / 3-D-Modell, 600 mm im STP-FormatSTP1586 KB
3-D model, 700 mm in IGS format / 3-D-Modell, 700 mm im IGS-FormatIGS1988 KB
3-D model, 700 mm in STP format / 3-D-Modell, 700 mm im STP-FormatSTP1586 KB
3-D model, 800 mm in IGS format / 3-D-Modell, 800 mm im IGS-FormatIGS1988 KB
3-D model, 800 mm in STP format / 3-D-Modell, 800 mm im STP-FormatSTP1586 KB
3-D model, 900 mm in IGS format / 3-D-Modell, 900 mm im IGS-FormatIGS1988 KB
3-D model, 900 mm in STP format / 3-D-Modell, 900 mm im STP-FormatSTP1586 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: SLCT90

Statements of complianceTanúsítvány sz.FájltípusFájlméret
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-2138BPDF166 KB
Certificates
/cert/cert1229c.pdfZ10 17 11 20068 064PDF495 KB
Canada ULE215245LINK---
USA ULE215245LINK---

Software: SLCT90

Software ToolsMegjelenési információFájltípusFájlméret
Software tools / Software ToolsZIP131 KB

Kapcsolódó termékek: SLCT90

Matching system components
Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Operating voltage: 24 V DC, ± 20 %fa
Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Operating voltage: 24 V DC, ± 20 %fa
Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Operating voltage: 24 V DC, ± 20 %fa
Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Operating voltage: 24 V DC, ± 20 %fa
Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Operating voltage: 24 V DC, ± 20 %fa
Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, Expansion slots for SB4 modules for optional enhanced functionality, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, 7-segment diagnostic display, Operating voltage: 24 V DC, ± 20 %fa
Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 4 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Operating voltage: 24 V DC, ± 20 %fa
Evaluation unit for security through-beam sensors SLA5(S) and SLA40; for safety light grids SLP, for safety light curtains SLC; for switching pads and emergency stop buttons of categories 2 and 4, 8 sensor channels, Self-monitoring (type 4 according to IEC/EN 61496-1), Operating mode can be selected by means of DIP switches, Start/Restart disable , Operating voltage: 24 V DC, ± 20 %fa
Accessories
Universal test rod for device test of all light curtains from the SLCT and SLCS seriesfa
Profile alignment aid; simplified alignment of the SLCS and SLCT safety light curtainsfa
Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mountingfa
Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mountingfa
Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mountingfa
Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mountingfa
Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mounting, Rear panel prepared for 3 sensors and 6 cable glandsfa
Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mounting, Rear panel prepared for 3 sensors and 6 cable glandsfa
Eight grooves for mounting photoelectric sensors or accessories, three on the inside and five on the outside, Corner mounting of photoelectric sensors with a directional difference of 90°, Cover prepared for indicator light mounting, Rear panel prepared for 3 sensors and 6 cable glandsfa
Side protection for the OMH-SLCT-100 and OMH-SLCT-110 mounting basesfa
Side protection for the OMH-SLCT-100 and OMH-SLCT-110 mounting basesfa
Side protection for the OMH-SLCT-100 and OMH-SLCT-110 mounting basesfa
Side protection for the OMH-SLCT-100 and OMH-SLCT-110 mounting basesfa
Rotation of the SLCT-M-01 inclined mirror around the physically preferred rotational axis, Vertical adjustment decoupled from rotation, Mounting on ground anchors, Lead-away of lines in floor via hole for NW29 coupling nut and corrugated hose, Base plate to compensate for uneven ground, particularly for brittle surfacesfa
Rotation-invariant deflection of a light beam by 90° in the plane of incidence, making it highly vibration-resistant, Translation-free deflection with no lateral beam shift with OMH-SLCT-200 floor mount, Silver-coated mirror glass, Mirror glass with low light absorption, Up to ∅ 48 mm pencil of rays in the plane of incidencefa
Rotation-invariant deflection of a light beam by 90° in the plane of incidence, making it highly vibration-resistant, Translation-free deflection with no lateral beam shift with OMH-SLCT-200 floor mount, Silver-coated mirror glass, Mirror glass with low light absorption, Up to ∅ 48 mm pencil of rays in the plane of incidencefa
Rotation-invariant deflection of a light beam by 90° in the plane of incidence, making it highly vibration-resistant, Translation-free deflection with no lateral beam shift with OMH-SLCT-200 floor mount, Silver-coated mirror glass, Mirror glass with low light absorption, Up to ∅ 48 mm pencil of rays in the plane of incidencefa
Clamp mounting suitable for 6 mm ... 11.5 mm groovefa
Reverse clamp mounting suitable for 8.5 mm ... 10.5 mm groovefa
Mounting bracket, muting arm with round rod d=12 mmfa
Quick clamp and adjustment systemfa
Attachment aid for OMH-SLCT-01fa
Mounting bracket including adjustmentfa
Mounting bracket including adjustment (with loose bearing)fa
Mounting bracket including adjustmentfa
Swivel Bracketfa
Funkcionális Biztonság Központ a Pepperl+Fuchs-nál

Látogassa meg a Funkcionális Biztonság Központot

Több száz SIL/PL értékeléssel ellátott termék, ingyenes eszközök és prospektusok egy helyen: a „Funkcionális Biztonság Központ” a legjobb kiindulópont biztonsági funkciók kivitelezésekor.

Biztonságitermék-választó SIL/PL-értékeléssel rendelkező termékekhez

Biztonságitermék-választó SIL/PL-értékeléssel rendelkező termékekhez

Ön egy adott SIL/PL-értékeléssel rendelkező terméket keres? Választóeszközünk áttekintést nyújt a biztonsági szempontból értékelt eszközökről, beleértve a biztonságintegritási szintet (SIL) és a teljesítményszintet (PL) – próbálja ki!