Ipari érzékeléstechika
+36 88 545 902
+36 88 560 472
Leválasztók, jelátalakítók
+36 88 545 902
+36 88 560 472

Nem rendelhető

Nem rendelhető
Nem rendelhető

Thru-beam sensor M7/MV7/59/76a/82b/103/115b

M7/MV7/59/76a/82b/103/115b
  • Reliable sensor for standard applications
  • Miniature design with versatile mounting options
  • Automatic adjustment of sensitivity via teach-in
  • Resistant against noise: reliable operation under all conditions
  • Certified by ECOLAB

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

A teljes adatlap letöltése PDF formátumban:


Adatlap kivonata: Műszaki adatok  M7/MV7/59/76a/82b/103/115b

Termék leírása
Thru-beam sensor for standard applications, miniature design, 4.5 m detection range, red light, dark on, PNP output, weak signal output, test input, fixed cable with M12 plug
System components
EmitterM7/76a/115b
ReceiverMV7/59/82b/103/115b
General specifications
Effective detection range0 ... 3.5 m
Threshold detection range4.5 m
Light sourceLED
Light typemodulated visible red light
Target sizemin. 7 mm
Diameter of the light spotapprox. 180 mm at a distance of 3.5 m
Opening angleapprox. 3 °
Ambient light limit40000 Lux
Functional safety related parameters
MTTFd1130 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)60 %
Indicators/operating means
Operation indicatorReceiver: LED green, flashes in case of short-circuit Emitter: LED green
Function indicatorReceiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve
Control elementsReceiver: Teach-In key
Electrical specifications
Operating voltage10 ... 30 V DC , class 2
Ripplemax. 10 %
No-load supply currentEmitter: ≤ 17 mA
Receiver: ≤ 15 mA
Input
Test inputemitter deactivation at +UB
Output
Stability alarm output1 PNP, inactive when level falls below function reserve after approx. 5 s.
Immediately inactive if the beam is interrupted 4 times during the flashtime.
Switching typedark-on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 1.5 V DC
Switching frequency1000 Hz
Response time0.5 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
Protection classII, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
UL approvalcULus
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Degree of protectionIP67 / IP69K
Connection200 mm connecting cable with 4-pin, M12x1 connector
Material
HousingPC (glass-fiber-reinforced Makrolon)
Optical facePMMA
Massapprox. 100 g (emitter and receiver)
Dimensions
Height31 mm
Width23 mm
Depth11 mm

Classifications

SystemClasscode
ECLASS 13.027270901
ECLASS 12.027270901
ECLASS 11.027270901
ECLASS 10.0.127270901
ECLASS 9.027270901
ECLASS 8.027270901
ECLASS 5.127270901
ETIM 9.0EC002716
ETIM 8.0EC002716
ETIM 7.0EC002716
ETIM 6.0EC002716
ETIM 5.0EC002716
UNSPSC 12.139121528

Details: M7/MV7/59/76a/82b/103/115b

Function

Small, robust, effective, and reliable - these are the properties of the ML7 sensor series. Due to their small size, number of versions, and two different lens positions, they are particularly suited for installation in tight spaces. The robust design and high quality of Pepperl+Fuchs mean they can also be used under harsh environmental conditions. The efficient technology, switching frequencies up to 1000 Hz, high resistance to ambient light, and 4-in-1 output make the series suitable for non-contact object detection.

Product Documentation: M7/MV7/59/76a/82b/103/115b

Nyelvválasztás:
Brief InstructionsNyelvFájltípusFájlméret
Instruction leaflet / BeipackzettelALLPDF474 KB

Design / Simulation: M7/MV7/59/76a/82b/103/115b

Nyelvválasztás:
CADNyelvFájltípusFájlméret
3-D model, 4-pin M12 plug, straight / 3-D-Modell M12-Stecker, gerade, 4-poligALLSTP1869 KB
CAD 3-D / CAD 3-DALLSTP102 KB
CAD 3-D additional / CAD 3-D additionalALLSTP102 KB

Approvals: M7/MV7/59/76a/82b/103/115b

Nyelvválasztás:
Declaration of ConformityTanúsítvány sz.NyelvFájltípusFájlméret
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0067CALLPDF309 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-5334ALLPDF229 KB

Kapcsolódó termékek: M7/MV7/59/76a/82b/103/115b

Accessories

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa

Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
R10x és R20x sorozatú fotoelektromos érzékelők

Most először kaphatók összehangolt, fotoelektromos működési elvek és innovatív technológiák felhasználásával készült, egységes házakkal szerelt megoldáscsomagok. A felhasználók az egységes működési koncepció minden előnyét kihasználhatják a teljes portfólióban. Fedezze fel az R100, R101, R103, R200 és R201 sorozatot...

ML100 fotoelektromos érzékelő

Legyen szó üvegről, napelemekről vagy nyomtatott áramköri lapokról: Az ML100 sorozat fotoelektromos érzékelőit pontosan úgy tervezték, hogy megfeleljenek a különböző összetett érzékelési feladatok követelményeinek. Tudjon meg többet a portfólióról...