Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Product Description |
---|
Device type manager (DTM) for HART communication |
General specifications | ||
---|---|---|
Description | Universal DTM for parameterization of individual HART sensors via "universal" commands and "common practice" commands (manufacturer: ICS)* * Note: DTMs only work in conjunction with FDT frame application e. g. PACTware. |
|
Software | ||
Hardware requirements | - processor min. 500 MHz - working memory: min. 256 MB - hard disk space: min. 200 MB - graphic resolution 1024 x 768 Depending on the complexity of the project and the DTMs used, the memory requirement may be several times higher. |
|
Software requirements | operating system: - Microsoft Windows 7, Windows 8 or Windows 10 internet browser: - Microsoft Internet Explorer 4.0 or higher software components for installation - Microsoft .Net Framework 3.5 or higher - FDT framework program PACTware 5.X or higher - the application-specific device type manager |
|
Languages | German, English, French, Spanish, Russian can be selected | |
Installation | Administrator rights are required For installation in Windows. | |
Configuration | ||
Representation of the system configuration | Graphic representation of all communication and device type managers in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be opened simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously. | |
System planning, application processing | Generation of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels. |
System | Classcode |
---|---|
ECLASS 13.0 | 27242505 |
ECLASS 12.0 | 27242502 |
ECLASS 11.0 | 27242502 |
ECLASS 10.0.1 | 27242502 |
ECLASS 9.0 | 27242502 |
ECLASS 8.0 | 27242502 |
ECLASS 5.1 | 27242502 |
ETIM 9.0 | EC000757 |
ETIM 8.0 | EC001416 |
ETIM 7.0 | EC001416 |
ETIM 6.0 | EC001416 |
ETIM 5.0 | EC000809 |
UNSPSC 12.1 | 43232901 |
Based on FDT technology
Device Type Manager (DTMs) available for all Pepperl+Fuchs devices and systems
Commissioning, configuration and parameter assignment independent of the process control system
Communication DTMs available for serial interfaces and fieldbus systems
Maintenance, diagnostics and error correction
Device Description Files/Drivers | Release Info | File Type | File Size |
---|---|---|---|
Generic HART DTM / Generic HART DTM | 4.0.3 | ZIP | 7197 KB |
Accessory of | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Matching System Components | ||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Accessories | ||||||
|
||||||
|