Signal Converter K23-SSI/USB/25B-C
- Multifunction device with operating modes for incremental rotary encoders, SSI absolute rotary encoders, and rotary encoders with start/stop interface
- USB interface for configuring and reading
- Extremely short conversion times
- User-definable, non-linear characteristic curve with 24 interpolation points
- Auxiliary voltage output 5 V DC and 24 V DC for rotary encoder supply
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of K23-SSI/USB/25B-C
| Product Description |
|---|
| SSI/parallel signal converter |
| Functional safety related parameters | ||
|---|---|---|
| MTBF | 56.4 a (continuous operation at 60°C) | |
| Indicators/operating means | ||
| LED green | status display | |
| Electrical specifications | ||
| Fusing | External: T 0.5 A Reverse polarity protection |
|
| Operating voltage | 10 ... 30 V DC | |
| Operating current | approx. 30 mA (Unladen) | |
| Supply | Rotary encoder: 5 V DC and 24 V DC (approx. 1 V less than UB) Max. 250 mA |
|
| Interface 1 | ||
| Interface type | Mini USB | |
| Transfer rate | 115,200 baud | |
| Flow control | 8none1 | |
| Interface 2 | ||
| Connection of | Clock, /Clock, Data, /Data | |
| Interface type | SSI Managing or managed operations |
|
| Frequency range | max. 1 MHz | |
| Load current | max. 3 mA / Ri > 10 kΩ / 10 pF | |
| Resolution | 10 bits … 32 bits | |
| Data format | Binary code or gray code | |
| Interface 3 | ||
| Interface type | Start/Stop RS422 input: 1 x (Start_Stop, /Start_Stop); 1x (ext. Init_In, ext. /Init_In) RS422 output: 1 x (Init_Out, /Init_Out) |
|
| Resolution | Depends on the speed of the encoder wave guide | |
| Frequency | Init pulse width: 1 s … 9 µs (adjustable) Init pulse frequency: 62.5 ... 5000 Hz (adjustable) Time measured via pulse frequencies: 48 MHz |
|
| Input 1 | ||
| Input type | Incremental | |
| Input format | RS422, TTL, HTL differential, HTL PNP, or HTL NPN | |
| Connection | Lanes: A, /A, B, /B | |
| Input frequency | RS422: max. 1 MHz (RS422 differential signal > 0.5 V) HTL differential: max. 500 kHz (HTL differential signal > 2 V) TTL/HTL (PNP/NPN): max. 250 kHz |
|
| Load current | Max. 6 mA/Ri > 5 kΩ/10 pF | |
| Input 2 | ||
| Input type | 3 x Control input | |
| Input format | HTL, PNP (low: 0 V … 3 V, high: 9 V … 30 V) | |
| Input frequency | max. 10 kHz | |
| Load current | Max. 2 mA/Ri > 15 kΩ/470 pF | |
| Output | ||
| Number/Type | Parallel | |
| Signal | Push/pull | |
| Output current | Gray-Code, Binary-Code, BCD-Code | |
| Resolution | 25 bit | |
| Contact loading | max. 35 V on COM+ (Short-circuit resistance up to 27 V) max. 20 kA at 24 V (Ri = 600 Ω) |
|
| Sampling time | 0.001 s … 9.999 s (adjustable) | |
| Ambient conditions | ||
| Operating temperature | -20 ... 60 °C (-4 ... 140 °F) (noncondensing) | |
| Storage temperature | -25 ... 75 °C (-13 ... 167 °F) (noncondensing) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Connection | screw terminals 1.5 mm², AWG 16 25-pin Sub-D socket |
|
| Material | ||
| Housing | plastic | |
| Installation | on 35 mm DIN mounting rail acc. to EN 60715:2001 | |
| Mass | approx. 100 g | |
| Dimensions | ||
| Height | 102 mm | |
| Width | 23 mm | |
| Depth | 102 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210904 |
| ECLASS 12.0 | 27210904 |
| ECLASS 11.0 | 27210904 |
| ECLASS 10.0.1 | 27210904 |
| ECLASS 9.0 | 27210904 |
| ECLASS 8.0 | 27210904 |
| ECLASS 5.1 | 27210904 |
| ETIM 9.0 | EC002918 |
| ETIM 8.0 | EC002918 |
| ETIM 7.0 | EC002918 |
| ETIM 6.0 | EC002918 |
| ETIM 5.0 | EC002475 |
| UNSPSC 12.1 | 39121007 |
Details: K23-SSI/USB/25B-C
Function
The K23-SSI/USB/25B-C is a small and inexpensive, but extremely powerful signal converter for industrial applications, where SSI telegrams from sensors or encoders are converted into parallel signals.
The device is contained in a compact housing for rail mounting.
The device features
-
screw terminals
-
a USB connection
-
a 25-pin Sub-D socket
-
3 user-configurable digital control inputs
Applicable encoders and sensors
Encoders and all comparable sensors with SSI interface (10 ... 32 bit binary or Gray code), either in leading mode (the device generates the clock signal itself), or in guided mode (the device switches to an existing clock signal).
Incremental input signals are processed in frequency converter mode or counter mode. In start-stop mode, transonic or magnetostrictive displacement sensors can be connected.
Product Documentation: K23-SSI/USB/25B-C
| Manuals | Language | File Type | File Size |
|---|---|---|---|
| Manual K23-SSI/USB/25B-C | ENG | 3094 KB |
Design / Simulation: K23-SSI/USB/25B-C
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 3-D / CAD 3-D | ALL | STP | 775 KB |
Approvals: K23-SSI/USB/25B-C
| Declaration of Conformity | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-4965 | ALL | 114 KB |
Software: K23-SSI/USB/25B-C
| Software Tools | Release Info | File Type | File Size |
|---|---|---|---|
| software tool to configure K23-SSI devices and TC-LCDC displays / Parametrier- und Konfigurationssoftware für K23-SSI und TC-LCDC | 08/2021 | ZIP | 85353 KB |
Pepperl+Fuchs (India) Pvt. Ltd.
Ground Floor, #546/1, Sy. No. 46, 7th Main
4th Phase, Peenya Industrial Estate
Bangalore - 560058
India
info@in.pepperl-fuchs.com
+91 80 4609 6000
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.