6500 Series Vent EPV-6500-*-*
- A selection of vents for specific applications
- Intrinsically safe operation
- Continuous flow vents for precise flow rates for dilution applications
- Continuous flow measurement for dilution, purging, and pressurization
- Low leakage rate vents for air or inert gas conversation
- High flow rate vents for fast, large enclosure systems
- Universal mounting in any orientation including most of the unit inside the enclosure
- Maximum enclosure size 12.75 cu.meters (450 cu.ft.)
- ATEX/IECEx Zone 1/21 certified for Ex pyb and Ex pxb
- Up to SIL 2 acc. to IEC/EN 61508
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of EPV-6500-*-*
| Product Description |
|---|
| Enclosure protection vent for 6500 series type Ex pyb Ex pxb purge and pressurization system |
| General specifications | ||
|---|---|---|
| Series | 6500 |
|
| Number of volume exchanges | 5 to 19 |
|
| Hazardous environment | gas, dust, gas and dust | |
| Functional safety related parameters | ||
| Safety Integrity Level (SIL) | SIL 2 |
|
| Electrical specifications | ||
| Connection | ||
| Signal | BUS back to the 6500 control unit |
|
| Connection | M12 connector, 4-pin, cable length 5 meters (provided) | |
| Cable length | max. 60 meters at 50 pf/ft and 0.2 µH/ft | |
| Indicators/settings | ||
| LED indication | POWER: green | |
| Pneumatic parameters | ||
| Protective gas supply | instrument grade air or inert gas | |
| Maximum pressure | depends on the integrity of the enclosure (strength) max. vent pressure: 25'' wc (635 mm wc) (62 mbar / 6200 pa) vent pressure range: 0 to 9.9" wc (0 to 25 mbar) |
|
| Safe pressure | Gas: 0.35'' wc (8,88 mm wc) (0.88 mbar/ 88 pa) Dust: 0.35'' wc (8,88 mm wc) (0.88 mbar/ 88 pa) Gas+Dust: 0.35'' wc (8,88 mm wc) (0.88 mbar/ 88 pa) |
|
| Purge flow rate | See graphs Readout on display is in increments of 28 l/min (1 scfm). Minimum and maximum reading depends on type of vent and supply pressure. EPV-6500-*-07, 08 will readout continuous flow. |
|
| Purge flow and enclosure pressure rate | See graphs Readout on display is in increments of 28 l/min (1 scfm). Minimum and maximum reading depends on type of vent and supply pressure. EPV-6500-*-07, 08 will readout continuous flow. |
|
| Flow rate for leakage compensation | EPV-6500....-01: 593 l/hr (21 scfh) @ .63mbar (.25"wc) 1640 l/hr (58 scfh) @ 1.9mbar (0.75"wc) EPV-6500....-03: 395 l/hr (14 scfh) @ .63mbar (.25"wc) 961 l/hr (34 scfh) @ 1.9mbar (0.75"wc) EPV-6500....-05: 260 l/hr (9.2 scfh) @ .63mbar (.25"wc) 622 l/hr (22 scfh) @ 1.9mbar (0.75"wc) EPV-6500....-07: n/a EPV-6500....-08: n/a |
|
| Breaking pressure | EPV-6500-...-01: 2.0 mbar (0.8" wc) EPV-6500-...-03: 3.5 mbar (1.4" wc) EPV-6500-...-05: 3.8 mbar (1.5" wc) EPV-6500-...-07: n/a EPV-6500-...-08: n/a |
|
| Conformity | ||
| Degree of protection | EN 60529 |
|
| Shock resistance | EN 60068-2 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
|
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
|
| Relative humidity | 5 ... 90 %, non-condensing |
|
| Vibration resistance | 5 ... 100 Hz , 1 g, 12 m/s2, all axes |
|
| Impact resistance | 30 g, 11 ms, all axes | |
| Mechanical specifications | ||
| Degree of protection | IP66 |
|
| Material | EPV-6500-AA-.... Cap: marine grade 5052 anodized aluminum, marine grade 6061T6 anodized aluminum EPV-6500-SS-.... Cap: 316L (UNS S31603) stainless steel; Body: marine grade 6061T6 anodized aluminum |
|
| Spark arrestor | 304 (UNS S30400) stainless steel | |
| Installation | - any orientation to enclosure - not gravity dependent - internal and external mounting possible |
|
| Mass | approx. 1.4 kg (3.1 lb) |
|
| Dimensions | 127 x 146 x 83 mm (5.0" x 5.8" x 3.3") | |
| Mounting | 1 ½" NPT knockout (50.8mm (2") hole) with seal nut included |
|
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | DEMKO 15 ATEX 1622X | |
| Marking |  II 2G Ex ib [pxb Gb] IIC T4 Gb II 2D Ex ib [pxb Db] IIIC T135 °C Db II 2G Ex ib [pyb Gb] IIC T4 Gb II 2D Ex ib [pyb Db] IIIC T135 °C Db |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018 , EN 60079-2:2014 , EN 60079-11:2012 | |
| International approvals | ||
| IECEx approval | ||
| IECEx certificate | IECEx UL 15.0147X | |
| IECEx marking | Ex ib [pxb Gb] IIC T4 Gb Ex ib [pxb Db] IIIC T135 °C Db Ex ib [pyb Gb] IIC T4 Gb Ex ib [pyb Db] IIIC T135 °C Db EPV-6000: -20 °C ≤ Tamb ≤ 60 °C EPV-6500: -20 °C ≤ Tamb ≤ 70 °C |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180591 |
| ECLASS 12.0 | 27180591 |
| ECLASS 11.0 | 27180591 |
| ECLASS 10.0.1 | 27292190 |
| ECLASS 9.0 | 27292190 |
| ECLASS 8.0 | 27292190 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121303 |
Details: EPV-6500-*-*
Function
EPV-6500-*-* enclosure protection vents provide pressure relief to pressurized enclosures and pressure and flow information to 6500 series control units. The vents are intrinsically safe when used in conjunction with a 6500 control unit. Vent models are available for standard applications or continuous flow dilution applications that require precise flow measurement. For a streamlined enclosure design, the vent can be mounted in any orientation and can be mounted inside a pressurized enclosure with just the vent cap outside of the enclosure. EPV-6500-SS-* models include reference pressure tubing and hardware for internal mounting.
Informative Literature: EPV-6500-*-*
| Literature | Language | File Type | File Size |
|---|---|---|---|
| Application Report - Hydrogen Analysis with Reliable Explosion Protection | ENG | 253 KB | |
| Application Report - Label Printer Solution for Zone 1/21 and Zone 2/22 Applications | ENG | 135 KB |
Product Documentation: EPV-6500-*-*
| Safety and Security Documentation | Language | File Type | File Size |
|---|---|---|---|
| Instruction manual | ENG | 168 KB | |
| Manuals | |||
| Manual | ENG | 8567 KB | |
Design / Simulation: EPV-6500-*-*
| CAD | Language | File Type | File Size |
|---|---|---|---|
| 3D drawing for EPV-6000 and EPV-6500 Vent / 3-D-Modell für EPV-6000 und EPV-6500 Druckwächter | ALL | STP | 7814 KB |
Approvals: EPV-6500-*-*
| Certificates | Certificate No. | Language | File Type | File Size |
|---|---|---|---|---|
| ATEX Certificate | DEMKO 15 ATEX 1622X Rev. 1 | ALL | 256 KB | |
| Brasil TUV Rheinland Brazil | TÜV 22.1424X | ALL | 1160 KB | |
| China SITIIAS CCC Ex Certificate | 2020322304002499 (Katy, TX USA) | ALL | 1041 KB | |
| IECEx Certificate of Conformity | IECEx UL 15.0147X | ALL | LINK | --- |
| Korea KOSHA | 16-AV4BO-0186X | ALL | 1013 KB | |
| UK-Type Examination Certificate | UL21UKEX2016X | ALL | 231 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B067C | ALL | 145 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0G1A | ALL | 157 KB | |
Associated Products: EPV-6500-*-*
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!
Pepperl+Fuchs (India) Pvt. Ltd.
Ground Floor, #546/1, Sy. No. 46, 7th Main
4th Phase, Peenya Industrial Estate
Bangalore - 560058
India
info@in.pepperl-fuchs.com
+91 80 4609 6000
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.