VOS1000-F226R-8MM-S Vision Sensor

Panoramica dei principali vantaggi

Wide range of detection tools for flexible inspection tasks
Combinable vision tools for feature detection, completeness checking, code reading, text recognition and object position checking
32 Jobs on-board can be saved
Integrated illumination
Mechanical focus adjustment
Easy integration with flexible programmable data output

Mostra di più

Product photo: Vision Sensor VOS1000-F226R-8MM-S

Connection Assignment: Vision Sensor VOS1000-F226R-8MM-S

Dimensions: Vision Sensor VOS1000-F226R-8MM-S

Nota

Tutti i documenti relativi ai prodotti, come ad esempio certificati, dichiarazioni di conformità ecc., pubblicati prima della conversione con il nome Pepperl+Fuchs GmbH o Pepperl+Fuchs AG, si applicano anche a Pepperl+Fuchs SE.

DE

DE
EN

Scheda tecnica Classificazione Informative Literature Product Documentation Design / Simulation Certificazioni Software Prodotto correlati

Dati tecnici di VOS1000-F226R-8MM-S

Vision sensor for advanced object detection;
Resolution: 640 x 480 pixels;
Light source: integrated LED flash, red;
Lens: M12 lens;
Focal length: 8 mm

Light source		Integrated LED lightning , red
Picture detail		dependant of operating distance (see manual)
Trigger mode		Free-running or triggered externally
Depth of focus		± 5 % of the operating distance
Focal length		8 mm
Resolution		640 x 480 pixels
Image sensor		1/3" CMOS monochrom Global Shutter 3.75 µm pixel size
Lens		M12 integrated lens

Parameter assignment

Parameterization via PC user interface VCT Tool

Evaluation procedure

Positioning and Guidance		Based on Parts or product marks, up to four Locators to detect X,Y shift and rotation
Identification and Verification		OCR, 1-D and 2-D codes
Detection & Pattern Matching		Pixel-, contour- or edge count
Measuring		Distance, angle, circle size (after calibration)

LED 1		Steady blue: sensor started, not set up Steady green: job loaded, ready for execution Flashing green: job loaded and being executed, capture in progress Steady red: sensor fault
LED 2		Flashing blue: starting (duration approx. 20 seconds) Steady green: measurement successful (Pass) Steady blue: measurement borderline (Recycle) Steady red: measurement unsuccessful (Fail)
LED 3		Steady blue: warm reset or restart Steady red/green/yellow: network activity
Focus setting		Focus adjustable via centering

Operating voltage	U_B	12 ... 30 V DC
No-load supply current	I₀	300 mA

Interface type		Ethernet
Protocol		PROFINET IO TCP/IP EtherNet/IP
Transfer rate		100 MBit/s

Interface type		RS-232 , serial
Transfer rate		115.2 kBit/s

Input type		optically decoupled Inputs
Input voltage		Logic low (OFF): 0 ... 3 V Logic high (ON): 11 ... 30 V Switching threshold: 12 V
Control input		Image capture trigger + 2 general purpose inputs 2 inputs can be used for job switching
Input current		8 mA ( typical )
Internal protection circuit		3 kΩ / 4000 V ( rms )
Switching delay		Switch-on time (ON): 20 µs Switch-off time (OFF): 10 µs Image capture trigger: 62 µs (until image capture is triggered)

Output type		3 general purpose outputs , freely programmable , optically decoupled
Switching voltage		max. 30 V
Switching current		max. 100 mA each output
Switching delay		Switch-on time (ON): 150 µs Switch-off time (OFF): 50 µs

Emitted interference		EN 61000-6-4:2007+A1:2011
Noise immunity		EN 61000-6-2:2005

Approvals

CE

Ambient temperature		0 ... 50 °C (32 ... 122 °F)
Storage temperature		-20 ... 60 °C (-4 ... 140 °F)

Degree of protection

IP67

Connection

8-pin M12 socket A-coded ; 12-pin M12 socket

Material

Housing		anodized aluminum
Optical face		Plastic pane

Installation

Mounting bracket

Mass

approx. 200 g

Dimensions

Height		57 mm
Width		58 mm
Length		61 mm

Note generali