Servizio assistenza Sensori Industriali
Telefono: +39 039 69599 1
Fax.: +39 039 69599 30
Servizio assistenza Protezione contro le esplosioni
Telefono ++39 039 62921
Fax ++39 039 6292 390

Adapter with USB Interface S-ADP-USB

S-ADP-USB
  • Isolated USB interface cable
  • Used with SC-System devices
  • Configurable via PC

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Scarica il Datasheet completo in formato PDF:


Estratto del Datasheet: Dati tecnici del  S-ADP-USB

Descrizione prodotto
Adapter with USB Interface
Electrical specifications
Current consumption50 mA (via USB)
Galvanic isolationsafe electrical isolation by reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff test voltage 3 kV, 50 Hz, 1 min
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Connection
Device1 x µUSB
Computer1 x Type A USB
Mass50 g
Cable length1.5 m

Approvals+Certificates: S-ADP-USB

Statements of complianceCertificato NumeroFile tipoDimensioni
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0534CPDF317 KB

Software: S-ADP-USB

Software Toolsinformazioni sulla liberatoriaFile tipoDimensioni
Configuration software for SC-System: SC-Config / Konfigurations Software für SC-System: SC-Config3.4.0ZIP---

Prodotti associati : S-ADP-USB

Accessory of
1-channel signal conditioner, 24 V DC supply, Thermocouple, RTD, potentiometer or mV input, Input for PTC thermistor, Current and voltage output, Line fault (LFD) and sensor burnout detection, Accuracy 0.1 %, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors, Input frequency 10 mHz ... 50 kHz, Relay contact output, Start-up override and restart inhibit, Configurable by DIP switches and software, Connection via screw terminalspa
1-channel signal conditioner, 24 V DC supply, Input bipolar current and voltage sources, Relay contact output, Accuracy 0.1 %, Restart inhibit, Configurable by DIP switches and software, Connection via screw terminalspa
Accessories
For SC-System, Free of charge, Internet download possiblepa
Nuova gamma di condizionatori di segnale Sistema SC

Scoprite la soluzione compatta più versatile!