ファクトリーオートメーション(FA)
プロセスオートメーション(PA)

Inductive sensor NSB15-L2M-2E2-V1-S2D2

NSB15-L2M-2E2-V1-S2D2
  • No unusable area
  • 15 mm flush
  • Use of standard metallic actuating surfaces
  • Applications up to Cat. 2, PLd/SIL 2 possible (can be used redundantly up to Cat. 3, PLe/SIL 3)
  • LED for switching state and fault indication
  • Safety outputs OSSD
  • Sensor head bidirectional and rotatable
  • TÜV certified

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):


技術データ  NSB15-L2M-2E2-V1-S2D2

General specifications
Switching function2 x normally open (NO)
Output typePNP
Rated operating distance15 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 12.15 mm
Actuating elementReference target according EN IEC 60947-5-2 (FE360 - ST37K)
45 mm x 45 mm x 1 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.35
Reduction factor r304 0.9
Reduction factor rBrass 0.45
Output type4-wire
Nominal ratings
Operating voltage18 ... 30 V
Rated operating voltage24 V
Switching frequency0 ... 10 Hz
Hysteresistyp. 5%
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Overload resistanceyes
Voltage drop≤ 3 V
Rated insulation voltage30 V
Operating current1 ... 30 mA per output
Off-state current0 ... 0.5 mA
No-load supply current≤ 15 mA
Time delay before availability≤ 300 ms
Switching state indicatorLED, yellow
Error indicatorLED, red
Functional safety related parameters
Safety Integrity Level (SIL)SIL 2
Performance level (PL)PL d
CategoryCat. 2
MTTFd> 7500 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)min. 60 %
Assured release distance of a PDDB22.5 mm
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2007
EN IEC 60947-5-3:2013
EN ISO 13849-1:2015
EN IEC 61508: 2010
EN 62061:2005+AC:2010+A1:2013+A2:2015
EN ISO 61131-2-2007 type 1, 2, 3
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Altitude≤ 2000 m above MSL
Mechanical specifications
Connection typeConnector plug M12 x 1 , 4-pin
Housing materialPA-GF35
metal base Xylan coated
metal mounting flange Xylan coated.
Sensing facePA-GF35
Degree of protectionIP68 / IP69
Mass192 g

Documents: NSB15-L2M-2E2-V1-S2D2

Manuals言語ファイルタイプファイルサイズ
Original Instructions/Functional Safety ManualENGPDF1471 KB
Originalbetriebsanleitung/Handbuch Funktionale SicherheitGERPDF1460 KB
Instruction manuals
Instruction manualENGPDF135 KB
BetriebsanleitungGERPDF137 KB

Approvals+Certificates: NSB15-L2M-2E2-V1-S2D2

Statements of compliance認証番号ファイルタイプファイルサイズ
EU-Declaration of conformity / EU-KonformitätserklärungDOC-4442PDF168 KB
Certificates
Canada USA UL Ordinary Location20171221-E87056PDF410 KB
Worldwide TÜV SÜD Functional Safety CertificateTÜV Süd Z10 20068 0086 Rev.00PDF684 KB

関連製品: NSB15-L2M-2E2-V1-S2D2

Accessories
Modular mounting bracket fa
Mounting aidfa
Connection cable, M12 to M12, PUR cable, 4-pinfa
Connection cable, M12 to M12, PUR cable, 4-pinfa
VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.