Serviceline Industrial Sensors
Serviceline Explosion Protection

Inductive sensor NSN20-L2M-2E2-V1-S2D2

NSN20-L2M-2E2-V1-S2D2
  • No unusable area
  • 20 mm non-flush
  • Use of standard metallic actuating surfaces
  • Applications up to Cat. 2, PLd/SIL 2 possible (can be used redundantly up to Cat. 3, PLe/SIL 3)
  • LED for switching state and fault indication
  • Safety outputs OSSD
  • Sensor head bidirectional and rotatable
  • TÜV certified

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

データシート(PDF):


技術データ  NSN20-L2M-2E2-V1-S2D2

General specifications
Switching function2 x normally open (NO)
Output typePNP
Rated operating distance20 mm
Installationnon-flush
Output polarityDC
Assured operating distance0 ... 16.2 mm
Actuating elementReference target according EN IEC 60947-5-2 (FE360 - ST37K)
60 mm x 60 mm x 1 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.4
Reduction factor r304 0.85
Reduction factor rBrass 0.5
Output type4-wire
Nominal ratings
Operating voltage18 ... 30 V
Rated operating voltage24 V
Switching frequency0 ... 10 Hz
Hysteresistyp. 5%
Reverse polarity protectionreverse polarity protected
Short-circuit protectionpulsing
Overload resistanceyes
Voltage drop≤ 3 V
Rated insulation voltage30 V
Operating current1 ... 30 mA per output
Off-state current0 ... 0.5 mA
No-load supply current≤ 15 mA
Time delay before availability≤ 300 ms
Switching state indicatorLED, yellow
Error indicatorLED, red
Functional safety related parameters
Safety Integrity Level (SIL)SIL 2
Performance level (PL)PL d
CategoryCat. 2
MTTFd> 7500 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)min. 60 %
Assured release distance of a PDDB30 mm
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2:2007
EN IEC 60947-5-3:2013
EN ISO 13849-1:2015
EN IEC 61508: 2010
EN 62061:2005+AC:2010+A1:2013+A2:2015
EN ISO 61131-2-2007 type 1, 2, 3
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Altitude≤ 2000 m above MSL
Mechanical specifications
Connection typeConnector plug M12 x 1 , 4-pin
Housing materialPA-GF35
metal base Xylan coated
metal mounting flange Xylan coated.
Sensing facePA-GF35
Degree of protectionIP68 / IP69
Mass197 g

Documents: NSN20-L2M-2E2-V1-S2D2

Manuals言語ファイルタイプファイルサイズ
Original Instructions/Functional Safety ManualENGPDF1471 KB
Originalbetriebsanleitung/Handbuch Funktionale SicherheitGERPDF1460 KB

CAD+CAE: NSN20-L2M-2E2-V1-S2D2

CADファイルタイプファイルサイズ
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS4351 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP1578 KB

Approvals+Certificates: NSN20-L2M-2E2-V1-S2D2

Statements of compliance認証番号ファイルタイプファイルサイズ
EU-Declaration of conformity / EU-KonformitätserklärungDOC-4442PDF168 KB
Certificates
Canada USA UL Ordinary Location20171221-E87056PDF410 KB
Worldwide TÜV SÜD Functional Safety CertificateTÜV Süd Z10 20068 0086 Rev.00PDF676 KB

関連製品: NSN20-L2M-2E2-V1-S2D2

Accessories
Modular mounting bracket fa
Mounting aidfa
Connection cable, M12 to M12, PUR cable, 4-pinfa
Connection cable, M12 to M12, PUR cable, 4-pinfa