Serviceline
Serviceline Industrial Sensors
Serviceline Explosion Protection

Ultrasonic sensor UC400-F77-IU-IO-V31

UC400-F77-IU-IO-V31
  • IO-Link interface for parameterization
  • Programmable via DTM with PACTWARE
  • Selectable sound lobe width
  • Synchronization options
  • Temperature compensation
  • Analog output

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

データシート(PDF):


技術データ  UC400-F77-IU-IO-V31

型番
Single head system
General specifications
Sensing range30 ... 400 mm
Adjustment range40 ... 400 mm
Dead band0 ... 30 mm
Standard target plate20 mm x 20 mm
Transducer frequencyapprox. 310 kHz
Response delayminimum : 10 ms
factory setting: 37 ms
Sensor cycle time≥ 10 ms (factory setting) ;
programmable to 60 s
Indicators/operating means
LED greensolid: Power on
flashing: Standby mode or IO-Link communication
LED yellowsolid: object in evaluation range
flashing: programming of the limits, object detected
LED redsolid: fault
Flashing: programming limits, object not detected
Electrical specifications
Operating voltage18 ... 30 V DC , ripple 10 %SS
No-load supply current≤ 50 mA
Power consumption≤ 500 mW
Interface
Interface typeIO-Link (after individual activation via programming button)
Input/Output
Input/output type1 synchronization connection, bidirectional
0 Level0 ... 1 V
1 Level2.5 V ... UB
Input impedance> 22 kΩ
Output rated operating currentcurrent source < 2.5 mA
Pulse length≥ 1 ms with external control, low active
Synchronization frequency
Common mode operation≤ 109 Hz
Multiplex operation≤ 109 Hz / n , n = number of sensors , n ≤ 10
Output
Output type1 analog output 0 (4) ... 20 mA or
1 analog output 0 ... 10 V
Resolutioncurrent output: evaluation range [mm]/3200 but ≥ 0.35 mm
voltage output: evaluation range [mm]/4000 but ≥ 0.35 mm
Deviation of the characteristic curve≤ ± 1 % of full-scale value
Repeat accuracy≤ ± 0.1 % of full-scale value
Load impedancecurrent output: ≤ 500 Ohm
voltage output: ≥ 1000 Ohm
Temperature influence≤ ± 0.75 % of the end value (with temperature compensation) from 10 minutes after switching on the sensor ; 0,17 %/K (without temperature compensation)
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperaturecurrent output -25 ... 60 °C (-13 ... 140 °F) voltage output -25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector plug M8 x 1 , 4-pin
Degree of protectionIP67
Material
HousingPolycarbonate
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Mass9 g
Tightening torque, fastening screwsmax. 0.2 Nm

CAD+CAE: UC400-F77-IU-IO-V31

CADファイルタイプファイルサイズ
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS3823 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP1236 KB
CAD Portal / CAD PortalLINK---
EPLAN
EPLAN Data Portal / EPLAN Data PortalLINK---
EPLAN macro EDZ / EPLAN Makro EDZEDZ62 KB

Approvals+Certificates: UC400-F77-IU-IO-V31

Statements of compliance認証番号ファイルタイプファイルサイズ
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3523APDF254 KB
Certificates
Canada USA UL Ordinary Location20181116-E87056PDF237 KB

関連製品: UC400-F77-IU-IO-V31

Accessories

Female cordset, M8, 4-pin, PVC cablefa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Double-ended cordset, M8 to M12fa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa