Fieldbus Segment Protector F2-SP-IC*

4 ... 10 outputs Ex ic (FISCO or Entity)
Advanced fault isolation at the spur
Segment Protector in Zone 2
Instruments in Zone 2 or Zone 1
For FOUNDATION Fieldbus H1 and PROFIBUS PA
Advanced Diagnostics at the spur
Power, Com, Terminator, Diagnostics, and Error LEDs

Technical Data
Informative Literature
Product Documentation
Approvals
お問い合わせ

注: Pepperl+Fuchs GmbH(旧社名)で発行された証明書・適合宣言書などすべての製品関連文書は、Pepperl+Fuchs AG(新社名)にそのまま適用されます。

データシート(PDF):

技術データ F2-SP-IC*

型番
Fieldbus Segment Protector

General specifications
Design / Mounting		Outside installation
Fieldbus connection
Main cable (Trunk)
	Rated voltage	9 ... 31 V DC 10.5 V DC minimum input voltage acc. to FF-846
	Rated current	max. 4.5 A
Outputs
	Number of outputs	see table "Technical data depending on model"
	Number of devices per output	1
	Rated voltage	max. 31 V
	Rated current	max. 32 mA jumper 1, position 2 max. 43 mA jumper 1, position 1
	Short-circuit current	46 mA jumper 1, position 2 57 mA jumper 1, position 1
Self current consumption		see table "Technical data depending on model"
Voltage drop main cable/outputs		max. 1.2 V
Voltage drop trunk In/Out		0 V
Terminating resistor		selectable via Jumper 100 Ω +/- 10 %
Surge protection		trunk, spurs overvoltage protected if voltage exceeds typ. 39 V, max. 41 V
Indicators/operating means
LED PWR		green: Fieldbus voltage > 10 V and fieldbus terminator is deactivated
LED PWR/TERM		green: Fieldbus voltage > 10 V and fieldbus terminator is activated
LED COM/ERR		yellow: flashing: fieldbus communication status and physical layer diagnostic status
LED SPURS		red: 2 Hz flashing in short-circuit condition
Jumper 1		configuration of short-circuit current/rated current
Jumper 2		configuration of grounding option for trunk and cable screen/shield
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC 60529
Fieldbus standard		IEC 61158-2
Climatic conditions		IEC 60721
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		see table 2
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		15 g , 11 ms
Vibration resistance		5 g , 10 ... 150 Hz
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		removable screw terminal , removable spring terminal , screw terminal
Core cross section		max. 2.5 mm² /AWG 12-24
Cable diameter		see table 3
Cable gland		see table 2
Housing		see figure 1
Housing material		EN 1780-1 46000 , ISO AlSi9Cu3(Fe) , anodized
Degree of protection		IP66
Mass		max 2.6 kg , depending on model
Dimensions		see table 2
Mounting		wall mounting
Data for application in connection with hazardous areas
EU-type examination certificate		TÜV 13 ATEX 107689 X
	Marking	II 3G Ex nA [ic] IIC T4 Gc , II 2(3)D Ex tb [ic Dc] IIIC T130°C Db
Supply
	Maximum safe voltage	35 V
Outputs
	Voltage	32 V
	Current	46 mA jumper 1, position 2 65 mA jumper 1, position 1
	Inductance	0.25 mH jumper 1, position 1 0.125 mH jumper 1, position 2
	Capacitance	60 nF
Directive conformity
	Directive 2014/34/EU	EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010 , EN 60079-31:2014
International approvals
IECEx approval		IECEx TUN 13.0004X
	Approved for	Ex nA [ic] IIC T4 Gc , Ex tb [ic Dc] IIIC T130°C Db
Certificates and approvals
FOUNDATION Fieldbus		FF-846
General information
Supplementary information		Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242610
ECLASS 12.0	27242610
ECLASS 11.0	27242610
ECLASS 10.0.1	27242610
ECLASS 9.0	27242610
ECLASS 8.0	27242610
ECLASS 5.1	27242601
ETIM 9.0	EC001601
ETIM 8.0	EC001601
ETIM 7.0	EC001601
ETIM 6.0	EC001601
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: F2-SP-IC*

Informative Literature: F2-SP-IC*

Literature	言語	ファイルタイプ	ファイルサイズ
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB

Product Documentation: F2-SP-IC*

Safety and Security Documentation	言語	ファイルタイプ	ファイルサイズ
Instruction manual	ENG	PDF	232 KB
Manuals
Manual Segment Protector F2-SP-IC*	ENG	PDF	2835 KB

Approvals: F2-SP-IC*

Certificates	認証番号	言語	ファイルタイプ	ファイルサイズ
Brasil TUV Rheinland Brazil	TÜV 14.1592 X	ALL	PDF	1121 KB
China SITIIAS CCC Ex Certificate	2020322310002785 (Singapore)	ALL	PDF	1722 KB
DNV Marine	TAA0000272	ALL	PDF	100 KB
Europe TUV Nord ATEX II 3 G	TÜV 13 ATEX 107689X	ALL	PDF	553 KB
India PESO (India) CCOE	A/P/HQ/KA/104/6097 (P579055)	ALL	PDF	105 KB
South Africa MASC	MASC S/23-8227X	ALL	PDF	489 KB
TUV Nord Ex nA nC Ex tb IECEx Certificate of Conformity	IECEx TUN 13.0004X	ALL	LINK	---
Worldwide Fieldbus Foundation	DC084300	ALL	PDF	56 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0193D	ALL	PDF	1292 KB

General Notes Relating to Pepperl+Fuchs Product Information

クイックリンク

IIoT Applications in Process Industries

Ethernet-APL enables continuous communication across all hierarchy levels. Learn more about the pioneering technology …

RSS Info Service for PANOS Updates

Stay informed when a new software update of PANOS, the operating system for Ethernet-APL switches, is released: With our RSS Feed you will get an email notfication in your inbox immediately after an update has been released.

FieldConnex®—Fieldbus Made Easy

From decisions to planning, installation, and commissioning up to operation and maintenance: Discover how to make the most out of your fieldbus infrastructure …

技術