Serviceline Industrial Sensors
Serviceline Explosion Protection

Corded handheld reader IDM-Z1-x60-D-*

IDM-Z1-x60-D-*
  • Approved for Zone 1 and 21 (ATEX and IECEx)
  • All 1-D standard barcode families supported
  • 2-D model supports Data Matrix, QR, and other two-dimensional codes
  • Fall tested from 2 m to ensure reliability

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

PDF 파일로 된 데이타 시트 다운로드:


데이타 시트 발췌: 기술 사양  IDM-Z1-x60-D-*

제품 설명
Corded 1-D and 2-D Handheld Reader for Zone 1/21
General specifications
Typescan frequency: 500 Hz (1-D models), 60 Hz (2-D model)
Light typeLED, visible red light (630 / 1310 nm)
ambient light immunity 100 000 lx
Readable codesbarcode types: Code 39, Code 39 Trioptic, Code 32, Code 93, Code 11, Codabar, Code 128, GS1-128 / EAN 128, UPC / EAN / JAN (with addition), MSI/Plessey, UK/Plessey, IATA, Interleaved 2 of 5, Standard and Industrial 2 of 5, Matrix 2 of 5, Telepen, GS1 DataBar, Australian Post, China Post, German Post, US Planet, US Postnet, British Post, Intelligent Mail, Japan Post, Korean Post, Dutch KIX Post
stacked code types (depending on model selected): PDF417, MicroPDF417, Code 49, Code 16K, Composite, Codablock F
2-D code types (depending on model selected): Data Matrix, QR, MicroQR, Aztec, Maxicode
Read distance20 ... 850 mm (1-D models)
30 ... 400 mm (2-D model)
Resolutionca. ≥ 0.76 mm (1-D models)
ca. ≥ 0.13 mm (2-D model)
Indicators/operating means
Indicators2 x LED (operating state)
beeper/buzzer (can be switched off)
Interface
Interface typeRS-232, RS-422, and USB (1-D models)
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61000-6-2:2005 + AC:2005 , EN 61000-6-4:2007 + A1:2011
Low voltageEN 60950-1:2006+A1:2010+A2:2013+A11:2009+A12:2011
RoHS
Directive 2011/65/EU (RoHS)EN 50581:2012
Ambient conditions
Operating temperature-20 ... 50 °C (-4 ... 122 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F) (1-D models)
-40 ... 70 °C (-40 ... 158 °F) (2-D model)
Relative humidity95 % non-condensing
Impact resistance50 fall tests from 2 m height onto concrete
Mechanical specifications
Degree of protectionIP65
Massapprox. 200 g without cable
Dimensions104 mm x 185 mm x 76 mm
Data for application in connection with hazardous areas
EU-type examination certificateIBExU 18ATEX1049
IECEx IBE 18.0008
Marking1-D models: Ex-Hexagon II 2G Ex ib IIC T4 Gb
Ex-Hexagon II 2D Ex ib IIIC T135°C Db
2-D model:
Ex-Hexagon II 2G Ex ib op is IIB T4 Gb
Ex-Hexagon II 2D Ex ib op is IIIC T135°C Db
Directive conformity
Directive 2014/34/EUEN 60079-0:2018
EN 60079-11:2012
EN 60079-28:2015
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Documents: IDM-Z1-x60-D-*

Manuals언어파일 타입파일 크기
ManualENGPDF1684 KB
Manufacturer's manualENGPDF4306 KB
Manufacturer's quick start guideENGPDF1240 KB
HandbuchGERPDF6023 KB
Hersteller-KurzanleitungGERPDF727 KB
HerstellerhandbuchGERPDF4814 KB
Instruction manuals
ИнструкцииBULPDF202 KB
Návod k poużitíCZEPDF197 KB
Instruktions manualDANPDF196 KB
Instruction manualENGPDF200 KB
KasutusjuhendESTPDF193 KB
KäyttöohjeFINPDF192 KB
Manuel d'instructionsFRAPDF197 KB
BetriebsanleitungGERPDF203 KB
Οδηγίες χρήσηςGREPDF205 KB
HandleidingHOLPDF196 KB
Instruction manual / BetriebsanleitungHRVPDF195 KB
Használati útmutatóHUNPDF197 KB
Manuale di istruzioniITAPDF195 KB
Lietošanas pamācībaLAVPDF196 KB
Instrukciju vadovasLITPDF197 KB
Instrukcja obsługiPOLPDF199 KB
Manual de instruçõesPORPDF196 KB
Manual de utilizareRONPDF196 KB
Návod na poużitieSLKPDF197 KB
Navodila za uporaboSLVPDF195 KB
Manual de instruccionesSPAPDF197 KB
ManualSWEPDF194 KB

Approvals+Certificates: IDM-Z1-x60-D-*

Statements of compliance인증서 번호파일 타입파일 크기
EU-Declaration of conformity / EU-KonformitätserklärungDOC-4586PDF40 KB
Certificates
/cert/cert4615a.pdfIBExU18ATEX1049PDF468 KB
IECEx Certificate of ConformityIECEx IBE 18.0008LINK---

관련문서: IDM-Z1-x60-D-*

Accessory of
VisuNet GXP Remote Monitor Zone 1/21, 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, Thin Client solution (with RM Shell firmware), Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21, UL listed for USA and Canadapa
VisuNet GXP Remote Monitor Zone 1/21, 19 in (48 cm) display, Thin Client solution (with RM Shell firmware), Lightweight design, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21, UL listed for USA and Canadapa
VisuNet GXP Remote Monitor Zone 2/22, 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, Thin Client solution (with RM Shell firmware), Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canadapa
VisuNet GXP PC Zone 1/21, 19 in (48 cm) display, PC solution with pre-installed Windows® operating system, Lightweight design, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21, UL listed for USA and Canadapa
VisuNet GXP Remote Monitor Zone 2/22, 19 in (48 cm) display, Thin Client solution (with RM Shell firmware), Lightweight design, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canadapa
VisuNet GXP PC Zone 2/22, 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, PC solution with pre-installed Windows® operating system, Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canadapa
VisuNet GXP PC Zone 1/21, 21.5" (54.61 cm) display, 16:9 aspect ratio widescreen formatting to match engineering stations, PC solution with pre-installed Windows® operating system, Lightweight design, Full HD Resolution, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21, UL listed for USA and Canadapa
VisuNet GXP PC Zone 2/22, 19 in (48 cm) display, PC solution with pre-installed Windows® operating system, Lightweight design, Completely modular system for easy field maintainability, Flush or bezel mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 2/22, UL listed for USA and Canadapa
VisuNet IXD PC Zone 1/21, 19 in (48 cm) high bright display, PC solution with pre-installed Windows® operating system, Lightweight design, Completely modular system for easy field maintainability, Panel and yoke mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21pa
VisuNet IXD Remote Monitor Zone 1/21, 19 in (48 cm) high bright display, Thin Client solution (with RM Shell firmware), Lightweight design, Completely modular system for easy field maintainability, Panel and yoke mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21pa
Accessories
Connection cable for IDM-Z1-x60-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x60-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Serial extension cable for IDM-Z1-* Handheld Barcode Readers, Serial extension cable, Approved for Zone 1 + 21 (ATEX + IECEx), M12 female socket to M12 male connector, Protocol: serialpa
Serial extension cable for IDM-Z1-* Handheld Barcode Readers, Serial extension cable, Approved for Zone 1 + 21 (ATEX + IECEx), M12 female socket to M12 male connector, Protocol: serialpa
Serial extension cable for IDM-Z1-* Handheld Barcode Readers, Serial extension cable, Approved for Zone 1 + 21 (ATEX + IECEx), M12 female socket to M12 male connector, Protocol: serialpa
Stainless steel holder for for IDMx6x handheld readers, compatible with AG-XX00 housing, Mounting bracket, Simple and fast mounting, Compatible with AG-XX00 housing (adapter included), Compatible with 1-D/2-D code handheld readers such as the IDM and Ident-Ex® portfoliospa
Serial extension cable for IDM-Z1-* Handheld Barcode Readers, Serial extension cable, Approved for Zone 1 + 21 (ATEX + IECEx), M12 female socket to M12 male connector, Protocol: serialpa
Connection cable for IDM-Z1-x60-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x60-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Connection cable for IDM-Z1-x60-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x60-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Stainless steel holder for for IDMx6x handheld readers, compatible with AG1 housing, Mounting bracket, Simple and fast mounting, Compatible with AG1 housing (adapter included), Compatible with 1-D/2-D code handheld readers such as the IDM and Ident-Ex® portfoliospa
Connection cable for IDM-Z1-x60-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x60-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Power supply for IDM-Z1-* handheld readers and base station, AC and DC power supplies for IDM-Z1-* handheld readers and base station, Enable operation in Zone 1/21, Sturdy aluminum housingpa
1 m connector cable for corded handheld reader with M12 connector to open cable end, Connector cable for wired 1-D Scanner IDM-Z1-160-D-1D-J1-S-* and 2-D Scanner IDM-Z1-260-D-2D-J1-S* and Bluetooth Basestation IDM-Z1-x61-B-J1-BT-N0, 4-wire with ferrules, IDM Scanner connection via M12-connector, Note: Supports only RS232 Scanner/Basestationpa