Serviceline Industrial Sensors
Serviceline Explosion Protection

Supply Module SK-IDM-Z1-x60-*

SK-IDM-Z1-x60-*
  • AC and DC power supplies for IDM-Z1-* handheld readers and base station
  • Enable operation in Zone 1/21
  • Sturdy aluminum housing

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

PDF 파일로 된 데이타 시트 다운로드:


데이타 시트 발췌: 기술 사양  SK-IDM-Z1-x60-*

제품 설명
Power supply for IDM-Z1-* handheld readers and base station
General specifications
TypeSupply Module
Supply
Power consumptionDC: 7.1 W
AC: 16 W , 50 ... 60 Hz
Electrical specifications
Operating voltageDC: 24 V DC typical , 18 ... 30 V DC voltage range
AC: 230 V AC typical , 90 ... 253 V AC voltage range
Interface
Interface typedepends on model
field side (Ex e) : RS-232 / RS-422 or USB
Connection side handheld readers and base station : RS-232 or USB
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61000-6-2:2005 + AC:2005 , EN 61000-6-4:2007 + A1:2011
Ambient conditions
Operating temperature-25 ... 60 °C (-13 ... 140 °F)
Storage temperature-40 ... 60 °C (-40 ... 140 °F)
Relative humidity95 % non-condensing
Mechanical specifications
Degree of protectionIP64
Cablepower supply cable: 0.2 ... 2.5 mm2 (24 AWG ... 14 AWG), 3 pin
data cable: 0.2 ... 2.5 m2 (24 AWG ... 14 AWG), 3 pin or 4 pin (depending on the model)
Lengthmax. 15 m or 5 m, depending on the model
Massapprox. 3.1 kg
Dimensions140 mm x 250 mm x 56 mm (W x H x D)
Data for application in connection with hazardous areas
EU-type examination certificateIBExU18ATEX1051
IECEx IBE 18.0010
MarkingEx-Hexagon II 2G Ex eb q [ib IIC/IIB] IIC T4 Gb
Ex-Hexagon II 2D Ex tb [ib] IIIC T135 °C Db
Directive conformity
Directive 2014/34/EUEN 60079-0:2018
EN 60079-11:2012
IEC 60079-31:2014
IEC 60079-5:2015
IEC 60079-7:2015
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Documents: SK-IDM-Z1-x60-*

Manuals언어파일 타입파일 크기
Manual SK-IDM-Z1-*ENGPDF4059 KB
Handbuch SK-IDM-Z1-*GERPDF2762 KB
Instruction manuals
ИнструкцииBULPDF210 KB
Návod k poużitíCZEPDF204 KB
Instruktions manualDANPDF203 KB
Instruction manualENGPDF210 KB
KasutusjuhendESTPDF199 KB
KäyttöohjeFINPDF199 KB
Manuel d'instructionsFRAPDF204 KB
BetriebsanleitungGERPDF210 KB
Οδηγίες χρήσηςGREPDF213 KB
HandleidingHOLPDF203 KB
Instruction manual / BetriebsanleitungHRVPDF202 KB
Használati útmutatóHUNPDF204 KB
Manuale di istruzioniITAPDF203 KB
Lietošanas pamācībaLAVPDF202 KB
Instrukciju vadovasLITPDF204 KB
Instrukcja obsługiPOLPDF206 KB
Manual de instruçõesPORPDF204 KB
Manual de utilizareRONPDF204 KB
Návod na poużitieSLKPDF204 KB
Navodila za uporaboSLVPDF202 KB
Manual de instruccionesSPAPDF204 KB
ManualSWEPDF201 KB

Approvals+Certificates: SK-IDM-Z1-x60-*

Statements of compliance인증서 번호파일 타입파일 크기
EU-Declaration of conformity / EU-KonformitätserklärungDOC-4588PDF42 KB
Certificates
/cert/cert4617a.pdfIBExU18ATEX1051PDF528 KB
IECEx Certificate of ConformityIECEx IBE 18.0010LINK---

관련문서: SK-IDM-Z1-x60-*

Accessory of
VisuNet IXD PC Zone 1/21, 19 in (48 cm) high bright display, PC solution with pre-installed Windows® operating system, Lightweight design, Completely modular system for easy field maintainability, Panel and yoke mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21pa
VisuNet IXD Remote Monitor Zone 1/21, 19 in (48 cm) high bright display, Thin Client solution (with RM Shell firmware), Lightweight design, Completely modular system for easy field maintainability, Panel and yoke mounting options, IP66 rating for each individual component and entire system with housing, Certified for ATEX and IECEx Zone 1/21pa
Base station for Zone 1/21, Base/charging station for IDM-Z1-x61-M-* Bluetooth handheld readers, Certified for ATEX and IECEx Zone 1/21, Bluetooth interfacepa
Corded 1-D and 2-D Handheld Reader for Zone 1/21 , Approved for Zone 1 and 21 (ATEX and IECEx), All 1-D standard barcode families supported, 2-D model supports Data Matrix, QR, and other two-dimensional codes, Fall tested from 2 m to ensure reliabilitypa
Accessories
Serial extension cable for IDM-Z1-* Handheld Barcode Readers, Serial extension cable, Approved for Zone 1 + 21 (ATEX + IECEx), M12 female socket to M12 male connector, Protocol: serialpa
Serial extension cable for IDM-Z1-* Handheld Barcode Readers, Serial extension cable, Approved for Zone 1 + 21 (ATEX + IECEx), M12 female socket to M12 male connector, Protocol: serialpa
Serial extension cable for IDM-Z1-* Handheld Barcode Readers, Serial extension cable, Approved for Zone 1 + 21 (ATEX + IECEx), M12 female socket to M12 male connector, Protocol: serialpa
Serial extension cable for IDM-Z1-* Handheld Barcode Readers, Serial extension cable, Approved for Zone 1 + 21 (ATEX + IECEx), M12 female socket to M12 male connector, Protocol: serialpa
Connection cable for IDM-Z1-x60-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x60-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Connection cable for IDM-Z1-x60-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x60-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Connection cable for IDM-Z1-x60-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x60-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Connection cable for IDM-Z1-x60-D-* corded Handheld Readers, Connection cable for corded IDM-Z1-x60-D-* 1-D and 2-D handheld Barcode Readers for easy connectivity of Pepperl+Fuchs VisuNet devices, Approved for Zone 1 + 21 (ATEX + IECEx), Compatible to DATL-IDM-DB-S-XX00-N0 (M12 female connector), M12 male connector to RJ50 connector with additional sealing ringpa
Accessory cable for IDM-Z1-x61-M-* bluetooth Handheld Readers, Serial connection cable for base station, Protocol: serial, Compatible with IDM-Z1-x61-B-J1* base station, Suitable for Zone 1/21 & Zone 2/22, RJ50 (cradle) to M12 male connectorpa
Accessory cable for IDM-Z1-x61-M-* bluetooth Handheld Readers, USB connection cable for base station, Protocol: USB, Compatible with IDM-Z1-x61-B-J1* base station, Suitable for Zone 1/21 & Zone 2/22, RJ50 (cradle) to M12 male connectorpa
Accessory cable for IDM-Z1-x61-M-* bluetooth Handheld Readers, USB connection cable for base station, Protocol: USB, Compatible with IDM-Z1-x61-B-J1* base station, Suitable for Zone 1/21 & Zone 2/22, RJ50 (cradle) to M12 male connectorpa
Accessory cable for IDM-Z1-x61-M-* bluetooth Handheld Readers, Serial connection cable for base station, Protocol: serial, Compatible with IDM-Z1-x61-B-J1* base station, Suitable for Zone 1/21 & Zone 2/22, RJ50 (cradle) to M12 male connectorpa