Serviceline Industrial Sensors
Serviceline Explosion Protection

VisuNet IXD Remote Monitor Zone 1/21 RM-IXD2100-19U*

  • 19 in (48 cm) high bright display
  • Thin Client solution (with RM Shell firmware)
  • Lightweight design
  • Completely modular system for easy field maintainability
  • Panel and yoke mounting options
  • IP66 rating for each individual component and entire system with housing
  • Certified for ATEX and IECEx Zone 1/21

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

PDF 파일로 된 데이타 시트 다운로드:

데이타 시트 발췌: 기술 사양  RM-IXD2100-19U*

제품 설명
VisuNet IXD Remote Monitor Zone 1/21
General specifications
TypeRemote Monitor
ProcessorIntel® Atom™ Bay Trail E3827 1.75 GHz
Mass storage32 GB industrial grade MLC SSD
Power consumptionAC:
115/230 V AC, 1.5 A max, 50/60 Hz DC: 18 ... 36 V DC, 5.3 A max
Indicators/operating means
TypeLiquid Crystal Display (LCD) with LED backlight
Screen diagonal48.26 cm (19 inch)
Resolution1280 x 1024 (SXGA) , Aspect ratio 5:4
Color depth24 bit (16.7 M) color
Brightness1000 cd/m2
Reading angle175° in all directions
Life spanback lamp life: 70 000 hrs typical half life , at 25 °C (77 °F)
Input devices
Touchscreenoptional: projective capacitive; 10 finger multi-touch, glove friendly
KeyboardFoil keyboard with different pointing device options available (see EXTA2 datasheet)
Interface typePepperl+Fuchs interface v1.0 for display units
1 x Ethernet 100/1000BASE-TX (Ex e) or optional fiber optic 1000Base-SX
1 x USB 2.0 (Ex e)
2 x USB 1.1 (Ex i; intended for Pepperl+Fuchs keyboard and mouse)
optional: 1 x barcode scanner interface (Ex i)
1 x barcode reader interface Pepperl+Fuchs IDM160-D-* and IDMx61-B-* (Ex i)
optional: 1 x RS-232 (Ex e)
optional: 1 x RS-485 (Ex e)
optional: 1 x Ethernet 100/1000Base-TX (Ex e)
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61326-1:2013 (industrial locations)
EN 61000-6-4:2007+A1:2011
Directive 2011/65/EU (RoHS)EN 50581:2012-09
Operating systemVisuNet RM Shell 4.x (based on Microsoft® Windows™ Embedded Standard 7)
or VisuNet RM Shell 5.x (based on Windows 10 IoT LTSB)
Ambient conditions
Operating temperature-20 ... 60 °C (-4 ... 140 °F)
Installed in AG1 housing: -20 ... 50 °C (-4 ... 122 °F)
Storage temperature-20 ... 60 °C (-4 ... 140 °F)
Installed in AG1 housing: -20 ... 50 °C (-4 ... 122 °F)
Relative humidity93% at 40°C, non-condensating, according to EN60068-2-78
AltitudeOperating altitude max. 2000 m
Shock resistance3 shocks 20 g , 11 ms all axis, IEC 60068-2-27
Vibration resistance5 ... 500 Hz, +/- 0.075 mm , 1.5 g, 10 cycles per axis according to EN60068-2-6
Mechanical specifications
Degree of protectionIP66 (individual components and entire system with housing)
MaterialPanel: anodized aluminum (TCU, PSU), powder coated aluminum (DPU)
Bezel: powder coated aluminum
InstallationYoke or wall mount with additional accessories
Panel-mount installation into cabinet with bezel and standard mounting kit
Masspanel with DC: 22 kg , panel with AC: 23 kg , system housing AG1: 19 kg
Dimensionspanel with DC: 542 mm x 460 x 132 mm
panel with AC: 542 mm x 460 mm x 149 mm
panel with housing: 582 mm x 490 mm x 224 mm
Data for application in connection with hazardous areas
EU-Type Examination CertificateCML 18 ATEX 5074 X
MarkingEx-Hexagon II 2G Ex eb q ib [ib] IIC T4 Gb
Ex-Hexagon II 2D Ex tb [ib] IIIC T85°C Db
Directive conformity
Directive 2014/34/EUEN 60079-0:2012+A11:2013, EN 60079-5:2015, EN 60079-7:2015, EN 60079-11:2012, EN 60079-31:2014
International approvals
IECEx approvalIECEx CML 18.0045X
Approved forEx eb q ib [ib] IIC T4 Gb
Ex tb [ib] IIIC T85°C Db
StandardsIEC 60079-0:2011, IEC 60079-5:2015, IEC 60079-7:2015, IEC 60079-11:2011, IEC 60079-31:2013

Documents: RM-IXD2100-19U*

Manuals언어파일 타입파일 크기
ManualENGPDF6811 KB
Instruction manuals
ИнструкцииBULPDF162 KB
Návod k poużitíCZEPDF217 KB
Instruktions manualDANPDF216 KB
Instruction manualENGPDF218 KB
KasutusjuhendESTPDF210 KB
KäyttöohjeFINPDF209 KB
Manuel d'instructionsFRAPDF220 KB
BetriebsanleitungGERPDF219 KB
Οδηγίες χρήσηςGREPDF228 KB
HandleidingHOLPDF218 KB
Instruction manual / BetriebsanleitungHRVPDF214 KB
Használati útmutatóHUNPDF217 KB
Manuale di istruzioniITAPDF218 KB
Lietošanas pamācībaLAVPDF214 KB
Instrukciju vadovasLITPDF216 KB
Instrukcja obsługiPOLPDF219 KB
Manual de instruçõesPORPDF219 KB
Manual de utilizareRONPDF217 KB
Návod na poużitieSLKPDF217 KB
Navodila za uporaboSLVPDF214 KB
Manual de instruccionesSPAPDF219 KB
ManualSWEPDF213 KB

Approvals+Certificates: RM-IXD2100-19U*

Statements of compliance인증서 번호파일 타입파일 크기
EU-Declaration of conformity / EU-KonformitätserklärungDOC-4059PDF442 KB
ATEX CertificateCML 18ATEX5074XPDF134 KB
IECEx Certificate of ConformityIECEx CML 18.0045XLINK---
India PESO (India) CCOEA/P/HQ/KA/104/5663 (P437043)PDF1046 KB

관련문서: RM-IXD2100-19U*

Fiber Optic Single-Mode Breakout Cable , Military-grade fiber optic single-mode cable for easy connectivity of Pepperl+Fuchs thin client / PC unitspa
Fiber Optic Single-Mode Breakout Cable , Military-grade fiber optic single-mode cable for easy connectivity of Pepperl+Fuchs thin client / PC unitspa
Display Unit, 10 point multi-touch sensor option allows design of modern user interfaces, Optically bonded, thermally hardened glass for enhanced viewing and durability , High-bright, daylight-readable LCD, Low-power consumption and heat dissipation due to LED backlight technologypa
DC Power Supply, Certified for ATEX and IECEx Zone 1/21, UL listed for USA and Canada, Galvanic isolation between input and output, Provides an output power up to 80 W at 24 V DC, Fully IP66 ratedpa
AC Power Supply, Certified for ATEX and IECEx Zone 1/21, UL listed for USA and Canada, Galvanic isolation between input and output, Provides an output power up to 80 W at 24 V DC, Fully IP66 ratedpa
Keyboard for VisuNet operator workstations zone 1+21 (ATEX)pa
Power supply for IDM* handheld readers and base stations , AC and DC power supplies for IDM-Z1-* handheld readers and base station, Enable operation in Zone 1/21, Sturdy aluminum housingpa
Thin Client Firmware for VisuNet Remote Monitors, Innovative firmware to support easy integration and management of remote monitors and thin clients, Supports installation of third-party applications, such as Citrix Receiver and Java Runtime, Based on Microsoft® Windows 10 IoT Enterprise LTSB, Microsoft Universal Write Filter, firewall, USB lock-down, and virus scanner support for maximum system security, Auto connect to host systems after RM startuppa
VisuNet Control Center License Key for RM Shell 5, Enables easy, centralized management of a Remote Monitor via the VisuNet Control Centerpa
DRDC License Key for RM Shell 5, Allows you to directly connect from a VisuNet Remote Monitor to a virtualized Emerson DeltaV systempa
PRO License Key for RM Shell 5, Restricted Web browser (Internet Explorer-based): Allows the secure direct access of HTML-based MES and SCADA systems, Restricted Web browser (Chrome-Engine-based): HTML5 compatible web browser that enables the secure access of websites and web-applications., Desktop Sharing: Clone a Remote Monitor to work with one host system from several Remote Monitors simultaneously, Raritan KVM Profile: Client allows to directly connect to Raritan Dominion KX II-101 V2 KVM-Switchpa
Accessories for VisuNet IXD, Enclosure and mounting options for the VisuNet IXD display unit, Ideally positioned cable glands for all necessary connections, Aluminum bezel prepared for different mounting optionspa
Thin Client Unit, Modular, lightweight design, Low-power design with minimal heat dissipation, VisuNet RM Shell 4.x or 5.x installed, High connectivity flexibility due to multiple interface options, Certified for ATEX and IECEx Zone 1/21, UL listed for USA and Canada, IP66pa
Gigabit Industrial Media Converter, Converts 10, 100, and 1000BASE-T to 1000BASE-SX, Supports multi-mode (50/125 µm) up to 550 m, Redundant power inputs (10 ... 30 V DC), CE approved and UL listed for Class I, Div. 2pa
Fiber Optic Multi-Mode Breakout Cable , Military-grade fiber optic multi-mode cable for easy connectivity of Pepperl+Fuchs thin client / PC units, Available with duplex LC to LC or LC to SC connectorspa
Raritan Dominion KVM-over-IP Switch, Allows direct connection from a VisuNet Remote Monitor (with RM Shell 5.2 or newer) to a host system, Supports concurrent remote and local access to an Operator Workstationpa

Learn more about the rugged solution for harsh outdoor conditions!

Update Service

As a user of the Pepperl+Fuchs thin client software, benefit from our new service.


Let us inform you as soon as a new software update is available!