Convergent mode sensor, 100 mm adjustable detection range, red light, light/dark on, PNP output, M8 plug, Miniature design, Diffuse mode sensor with long, narrow light spot, Easy to use, Very bright, highly visible light spot, Full metal thread mountingfa
Convergent beam sensor, 100 mm adjustable detection range, blue light, light/dark on, NPN output, fixed cable, Miniature design, Diffuse mode sensor with long, narrow light spot, Easy to use, Very bright, highly visible light spot, Full metal thread mountingfa
Convergent beam sensor, 100 mm adjustable detection range, blue light, light/dark on, PNP output, fixed cable, Miniature design, Diffuse mode sensor with long, narrow light spot, Easy to use, Very bright, highly visible light spot, Full metal thread mountingfa
Convergent beam sensor, 100 mm adjustable detection range, blue light, light/dark on, NPN output, M8 plug, Miniature design, Diffuse mode sensor with long, narrow light spot, Easy to use, Very bright, highly visible light spot, Full metal thread mountingfa
Convergent beam sensor, 100 mm adjustable detection range, blue light, light/dark on, PNP output, M8 plug, Miniature design, Diffuse mode sensor with long, narrow light spot, Easy to use, Very bright, highly visible light spot, Full metal thread mountingfa
Convergent mode sensor, 100 mm adjustable detection range, red light, light/dark on, NPN output, fixed cable, Miniature design, Diffuse mode sensor with long, narrow light spot, Easy to use, Very bright, highly visible light spot, Full metal thread mountingfa
Se oversikt: Pepperl+Fuchs offers digital input modules for our LB Zone 2 remote I/O systems, 2-, 3- and 8-channel for NAMUR sensors, mechanical- and electronic switches ... commissioning. 8-channel versions ensure the highest possible utilization of backplanes used for module connection and enable compact remote I/O solutions with large channel numbers. The modules support lead breakage detection and short circuit detection ...
Se oversikt: Pepperl+Fuchs offers relay output modules for our LB Zone 2 remote I/O systems 2-, 4- and 8- channel modules for valves, solenoid valves, optical and audible alarms ... Zone 2, Class I/Div.2 explosions-hazardous areas , Pepperl+Fuchs provides relay outputs with Ex nA terminals . As part of the LB system remote I/O solution , our relay output modules are available in 4- and 8-channel versions , ensuring the highest ...
The Windows-based devices of the Tab-IND series are available with display sizes of 8 and 10 inch for use in non-ex applications, including intra- and transport logistics Learn more about the rugged industrial tablet series ... rugged tablet series in accordance with MIL-STD-810H for use in the industry. The slim Windows-based devices in the Tab-IND series are available with an 8-inch and 10-inch display and offer numerous customization options as well as an extensive range of ...
From reliable detection to safe identification and exact positioning: Our automation technology enables smooth processes in a wide range of applications in the electronics industry ... manufacturing—from the battery cell to the battery module to the battery pack. Product Highlights for the Electronics Industry ML100 Series Sensors Detect Heavily Textured Surfaces The ML100 sensors are made for the most complex applications in the electronics ...
Se oversikt: K System switch amplifiers from Pepperl+Fuchs consist of three primary components: the power supply, the transistor switch amplifier and the output stage Galvanic isolation separates the ... ( NAMUR ). This means the residual voltage in normal operation is approximately 8 VDC and the short circuit current is approximately 8 mA. The switch points are typically between 1.2-2.1 mA. Many Pepperl+Fuchs isolators offer optional lead breakage and ...
Se oversikt: Pepperl+Fuchs offers optical data couplers and optical data transmission systems Our optical data couplers allow bi-directional communication for storage & retrieval systems, transfer ca ... between two stations takes place with infrared light, which is modulated by a data clock. Optical data couplers with many common interfaces used in industry are available. The data transfer takes place either serially or in 8-bit parallel mode. ...
Fra pålitelig waferregistrering til nøyaktig PCB-posisjonering – oppdag vår omfattende portefølje for elektronikkbransjen ... , Surface Mount Technology) 1) PCB-kantutløser På begynnelsen av SMT-prosessen legges kretskortene inn i en automatisk skjermskriver. ML100-sensoren for bakgrunnsundertrykking med flere punkter har en svært nøyaktig kantutløser for pålitelig registrering ...
Se oversikt: Safety through beam sensors from Pepperl+Fuchs form a modular protective system with an operating range of up to 65 meters ... The through-beam photoelectric sensors SLA series is part of a category 2 or 4 self-monitoring photoelectric safety devices per EN 954-1 and EN 61496. It must be used with the SLVA or SC4-8 safety amplifiers. Up to 8 through-beam sensors can be ...
I tillegg til velprøvde funksjoner leveres Tab-Ex®-nettbrett med nyskapende funksjoner, som integrering av applikasjoner med utvidet virkelighet, som gjør applikasjoner innen Industri 40 / IIoT enkle ... for komplekse applikasjoner – noe som baner vei for IIoT. Konseptet mobil medarbeider 8- og 10-tommers nettbrett forenkler mobile arbeideres daglige aktiviteter ved å gjøre anleggsdata i sanntid, digitale bilder, videoer og videostrømming mulig når som helst ...
Pepperl+Fuchs offers a comprehensive portfolio of industrial sensor technology for the automated production of PV wafers, PV cells and PV modules Learn more ... coating, solar wafers are difficult for photoelectric sensors to detect. The ML100 series diffuse mode sensors offer maximum precision for this demanding task: unlike conventional sensors, they work with BlueBeam technology instead of a red LED. For wafer ...
11-20/65Antall produkter pr. side:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.