Teknisk support Industrielle sensorer
Kundeservice, eksplosjonsbeskyttelse

Absolute encoders ENA58IL-S***-J1939

ENA58IL-S***-J1939
  • Solid shaft
  • Up to 31 bit overall resolution
  • CAN bus with SAE J1939 protocol
  • Free of wear magnetic sampling
  • High resolution and accuracy

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Last ned komplett datablad som PDF:


Datablad utdrag: Tekniske data for  ENA58IL-S***-J1939

General specifications
Detection typemagnetic sampling
Device typeAbsolute encoders
Linearity error≤ ± 0.1 °
UL File NumberE223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product.
Functional safety related parameters
MTTFd480 a at 40 °C
Mission Time (TM)20 a
L1055 E+8 revolutions at 40/110 N axial/radial shaft load
Diagnostic Coverage (DC)0 %
Indicators/operating means
LED greenOperating mode
LED redwrong baud rate
Electrical specifications
Operating voltage9 ... 30 V DC (with galvanic isolation)
Power consumption≤ 1.2 W
Time delay before availability< 250 ms
Output codebinary code
Code course (counting direction)adjustable
Interface
Interface typeJ1939
Resolution
Single turnup to 16 Bit
Multiturnup to 15 Bit
Overall resolutionup to 31 Bit
Transfer ratemin. 20 kBit/s , max. 1 MBit/s
Cycle time≥ 1 ms
Standard conformityISO 11898
Connection
ConnectorM12 connector, 5 pin
Cable∅6 mm, 4 x 2 x 0.14 mm2
Standard conformity
Degree of protectionDIN EN 60529, IP65 or IP67
Climatic testingDIN EN 60068-2-3, no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 200 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 20 g, 10 ... 1000 Hz
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product.
Ambient conditions
Operating temperaturecable, flexing: -5 ... 70 °C (23 ... 158 °F),
cable, fixed: -30 ... 70 °C (-22 ... 158 °F)
connector models: -40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity98 % , no moisture condensation
Mechanical specifications
Material
Housingnickel-plated steel , painted
FlangeAluminum
ShaftStainless steel
Massapprox. 300 g
Rotational speedmax. 12000 min -1
Moment of inertia50 gcm2
Starting torque< 5 Ncm
Shaft load
Axial40 N
Radial110 N

Documents: ENA58IL-S***-J1939

ManualsSpråkFiltypeFilstørrelse
Encoders with J1939 InterfaceENGPDF2622 KB
Instruction leaflets
Instruction leaflet / Beipackzettel ALLPDF1354 KB

CAD+CAE: ENA58IL-S***-J1939

CADFiltypeFilstørrelse
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ENA58IL-S***-J1939

Statements of complianceSertifikatnummerFiltypeFilstørrelse
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3270APDF86 KB
Certificates
CA UL General PurposeE223176LINK---
US UL General PurposeE223176LINK---

Relaterte produkter: ENA58IL-S***-J1939

Accessories
Single-ended female cordset, M12, 4-pin, shielded PUR cable, outdoorfa
Single-ended female cordset, M12, 4-pin, shielded PUR cable, outdoorfa
Single-ended female cordset, M12, 4-pin, shielded PUR cable, outdoorfa
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa
Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa
Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa
Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa
Precision coupling, Precision couplingfa
Stainless steel bellows coupling, Backlash-free, angle synchronous rotation transmission, Optimall misalignment compensation, Very high torsion spring stiffness, Small reset forces, Vibration- isolatingfa
Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa
Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa
Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa
Measuring wheel for shaft diameter 6 mm, Pimpled rubber coating, 200 mm circumferencefa
Measuring wheel for shaft diameter 6 mm, Knurled aluminum, 200 mm circumferencefa
Measuring wheel for shaft diameter 6 mm, Knurled plastic, 200 mm circumferencefa
Spring-loaded mounting bracket with a diameter of 36 mmfa