Archived Product Version

PHA250-F200A-R2-T-6641 Vision Sensor

Key Benefits at a Glance

Large capture range
High operating range
Integrated contrast compensation
Compact design
Integrated illumination
Detects the position of an
index hole

Product photo: Vision Sensor PHA250-F200A-R2-T-6641

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

DE

DE
EN

Datasheet Function Classification Informative Literature Product Documentation Design / Simulation Approvals Related Products

Technical data of PHA250-F200A-R2-T-6641

Precision positioning on hole in the 70 mm x 70 mm housing

Light source		LED
Light type		Integrated LED lightning (infrared)
Object size		Hole diameter 13 mm
Response delay		100 ms
Read distance		250 mm
Depth of focus		± 50 mm
Capture range		max. 120 mm x 100 mm

Camera

Type		CMOS , Global shutter
Number of pixels		752 x 480 pixels
Gray scale		256

MTTF_d		65 a
Mission Time (T_M)		10 a
Diagnostic Coverage (DC)		0 %

Operation indicator		LED green: Ready for operation
Function indicator		4 x LED yellow: +X, -X, +Y, -Y
Control elements		none

Operating voltage	U_B	24 V DC ± 15% , PELV
No-load supply current	I₀	max. 250 mA
Power consumption	P₀	6 W

Interface type		serial , RS 232
Transfer rate		max. 115.2 kBit/s
Cable length		max. 30 m

Interface type		Ethernet
Protocol		TCP/IP
Transfer rate		100 MBit/s
Cable length		max. 30 m

Input voltage		to be applied externally 24 V ± 15% PELV
Number/Type		Cycle stop, relative stroke
Input current		1.6 mA at 24 V
Switching threshold		low: < 10 V, high: > 15 V
Cable length		max. 30 m

Switching type		PNP , short-circuit/overload protected
Signal output		+X, -X, +Y, -Y
Switching voltage		24 V
Switching current		max. 100 mA each output
Cable length		max. 30 m

Shock resistance		EN 60068-2-27:2009
Vibration resistance		EN 60068-2-6:2008
Emitted interference		EN 61000-6-4:2007+A1:2011
Noise immunity		EN 61326-1:2013
Photobiological safety		exempt group according to EN 62471:2008

CE conformity		CE
CCC approval		CCC approval / marking not required for products rated ≤36 V

Operating temperature		0 ... 60 °C (32 ... 140 °F) , -30 ... 60 °C (-22 ... 140 °F) (noncondensing; prevent icing on the lens!)
Storage temperature		-30 ... 85 °C (-22 ... 185 °F)
Relative humidity		90 % , noncondensing
Shock resistance		< 50 g
Vibration resistance		< 3 G , 11 ... 200 Hz

Degree of protection

IP67

Connection

8-pin, M12x1 connector, standard (supply+IO) ,
5-pin, M12x1 socket, standard (RS 232) ,
4-pin, M12x1 socket, standard (LAN)

Material

Housing		PC/ABS
Optical face		Plastic pane

Installation

4 x M6 threading

Mass

approx. 160 g

Dimensions

Height		70 mm
Width		70 mm
Depth		50 mm

General Notes