Wsparcie Czujników Przemysłowych
Wsparcie Ochrony przed wybuchem
Niedostępne do zakupu

WirelessHART Adapter WHA-ADP-F8B2-*-A*-Z1(-Ex1)

  • 1-channel
  • Installation in Zone 1, Zone 21, and Class I Div. 1
  • WirelessHART Adapter
  • Cast aluminum housing
  • Battery operated
  • Also supplies field device
  • Input 2-wire HART transmitters and 2-wire HART current sources
  • Output WirelessHART wireless interface
  • Direct mounting on HART or 4 mA ... 20 mA field device
  • Rotatable antenna

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Pobierz pełną kartę katalogową w formie pliku PDF:

Dane techniczne  WHA-ADP-F8B2-*-A*-Z1(-Ex1)

Rated voltage7.2 V DC , battery operated
Electrical specifications
Output rated operating current4 ... 20 mA
Supplyloop power for field devices
voltage 8 ... 23 V DC, adjustable in steps of 0.1 V
Connectionterminals 1, 2, 3, 4, 5, 6
multiple wirings available , depending on operating mode
Current4 ... 20 mA
HART communication
ProtocolHART 7.1, backward compatible
Number of devices- one passive 4 ... 20 mA/HART field device
- up to 4 HART field devices in multidrop mode
Transfer rate1200 Bit/s
Parametersprimary/secondary master, preambles, retries and short address scan ranges
Interfaceomnidirectional dipole antenna, adjustable in vertical plane
Output variablesPV: loop current
SV, TV, QV:configurable according to user requirement
- adapter: temperature, battery voltage, energy consumed and estimated battery life-time
- 4 ... 20 mA device: scaled or linearized process value
- HART device: up to four process variables
CommunicationWirelessHART specifications
- physical layer: IEEE 802.15.4.2006
- frequency band: 2.4 GHz (ISM band, licence free)
- transmission rate: 250 kBit/s
- maximum transmit power: +10 dBm (EIRP)
- transmission range: outdoor 250 m, indoor 50 m (under reference conditions)
- communication standard: WirelessHART
Transfer characteristics
Accuracycurrent input: 0.125 % of measuring range
Influence of ambient temperaturecurrent input: 5 µA/K
Display elementsgreen LED: battry status
yellow LED: communication status
red LED: device status
Control elements1 push botton for:
- device status
- enter/leave configuration mode
- join trigger
- factory reset
Configurationwired interface:
- HART 7.1, FSK compatible
- transmission rate: 1200 Bit/s
- used for device commissioning with an handheld terminal or a configuration tool (DTM)
Parameter assignment- wireless transmit power: configurable to 0 dBm or 10 dBm (EIRP)
- device variables mapping
- publishing of up to ten burst messages in a wireless network, period and trigger mode selectable
- notification of up to five events from adapter and/or connected device(s) in a wireless network
- scaling and linearization of 4 ... 20 mA signal of connected analog device
- tuning of supply parameters for the connected device
- locking/unlocking of device parameterization
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Radio and telecommunication terminal equipmentThe usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning.
Directive 99/5/ECETSI EN 300328: V1.7.1 (2006-10), ETSI EN 301489-17: V1.2.1 (2002-08), EN 60950:2001
FCC CFR47 Part 15 B and CANSI C63.4-2003
Degree of protectionIEC 60529
Shock resistanceEN 60068-2-27
Vibration resistanceEN 60068-2-64
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humiditymax. 90 % , noncondensing
Vibration resistance20 ... 2000 Hz, 0,01 g2/Hz
Impact resistance15 g, 11 ms
Corrosion resistanceacc. to ISA-S71.04-1985, severity level G3
test setup and execution acc. to EN 60068-2-60
Mechanical specifications
Degree of protectionIP66
Cable entryM20 x 1.5 ; enclosed cable gland
Massapprox. 1000 g
Dimensions91 x 88.5 x 100.6 mm (3.6 x 3.5 x 4 inch) (without cable glands and antenna)
Mountingmounting on field device , panel or pole mounting
versions see type code
Data for application in connection with hazardous areas
EU-type examination certificateBVS 11 ATEX E 081 , for additional certificates see
MarkingEx-Hexagon II 2 G Ex ia IIC T4 Gb
Ex-Hexagon II 2 D Ex tb [ia] IIIC T70°C Db IP6x
Directive conformity
Directive 94/9/ECEN 60079-0:2009 , EN 60079-11:2007 , EN 60079-31:2009
International approvals
IECEx approvalBVS 11.0061
General information
Supplementary informationEC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see
Designationbattery W-BAT-B2-Li mandatory for use in connection with hazardous areas (order separately)
mounting set W-ACC-MKF8

Documents: WHA-ADP-F8B2-*-A*-Z1(-Ex1)

ManualsJęzykTyp plikuRozmiar pliku
Manual WirelessHART Adapter WHA-ADP-F8B2-*-**-Z1(-EX1)ENGPDF3318 KB
Instruction manuals
Instruction manualENGPDF66 KB
BetriebsanleitungGERPDF67 KB
Short instructions, safety information
Quick Start Guide WirelessHART Adapter Firmware Update InstructionsENGPDF2449 KB
Quick Start Guide WirelessHART NetworkENGPDF2045 KB
Kurzanleitung WirelessHART NetzwerkGERPDF2049 KB
Product information
Software Release Notes WHA-ADPENGPDF42 KB

Approvals+Certificates: WHA-ADP-F8B2-*-A*-Z1(-Ex1)

Statements of complianceNr. certyfikatuTyp plikuRozmiar pliku
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0458CPDF238 KB
Canada USA CSACoC 2535301 PDF114 KB
DEKRA EXAM IECEx Certificate of ConformityIECEx BVS 11.0061LINK---
Europe DEKRA EXAM ATEX Category 2 D ATEX Category 2 GBVS 11 ATEX E 081PDF3178 KB
India Radio ApprovalETA 2025/2012/WRLOPDF660 KB
Japan CETECOM ICT Radio / Connection202-LSA063 / D 12-0050-202PDF175 KB
Korea Radio ApprovalKCC-RRM-PFG-WHA-ADPPDF706 KB
Control drawings
Control Drawing CSA / Control Drawing CSA   PDF828 KB

Software: WHA-ADP-F8B2-*-A*-Z1(-Ex1)

Device type managersInformacja o wersjiTyp plikuRozmiar pliku
DTM Collection WirelessHART V1.0.2.4 / DTM Collection WirelessHART V1.0.2.4ZIP22259 KB

Produkty powiązane: WHA-ADP-F8B2-*-A*-Z1(-Ex1)

Matching system components
MODBUS WirelessHART Gateway, Graphical network analysis, Simple and automatic configuration options, Ethernet and RS 485 interface, HART and MODBUS protocol via both interfaces, Input WirelessHART wireless interface, 24 V DC supply, Redundant power supply connectionspa
EtherNet/IP WirelessHART Gateway, Graphical network analysis, Simple and automatic configuration options, Ethernet and RS 485 interface, HART protocol via both interfaces, EtherNet/IP protocol via Ethernet interface, Input WirelessHART wireless interface, 24 V DC supply, Redundant power supply connectionspa
Adapter WirelessHART BULLET

BULLET to jedyny na rynku adapter WirelessHART w obudowie Ex d. Wystarczy podłączyć BULLET do urządzenia polowego i włączyć wydajny, bezprzewodowy przesył sygnału.